Hostname: page-component-77c89778f8-swr86 Total loading time: 0 Render date: 2024-07-19T21:25:31.898Z Has data issue: false hasContentIssue false
  • English
  • Français

Determination of Aluminum in Iron-Aluminum Alloys by Vacuum X-Ray Fluorescence

Published online by Cambridge University Press:  06 March 2019

J. C. Wagner  and
F. R. Bryan
J. C. Wagner
Affiliation:
Ford Motor Company Dearborn, Michigan
F. R. Bryan
Affiliation:
Ford Motor Company Dearborn, Michigan
Get access

Abstract

Aluminum, is determined within the range 2-16% in iron. Repeatability of X-ray determinations is within a standard deviation of 0.07 % aluminum for a sample containing 10.2% aluminum. The standard deviation of the chemical values from the straight line calibration curve is 0.3% aluminum. X-ray analytical time is approximately 5% of the time required for chemical analysis. Peak-to-background ratio is improved by using a chromium-target thin-window X-ray tube instead of a tungsten tube.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 6: Eleventh Annual Conference on Applications of X-ray Analysis, August 8-10, 1962 , 1962 , pp. 339 - 344
Copyright
Copyright © International Centre for Diffraction Data 1962

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Cullity, B. D., Elements of X-ray Diffraction, Addison-Wesley Publishing Co., Inc., Reading, Mass., 1956, p. 335.Google Scholar
2. Miller, D. C. and Zingaro, P. W., “The Universal Vacuum Spectrograph, and Comparative Data on the Intensities Observed in an Air, Helium, and Vacuum Path,” Advances in X-ray Analysis Vol. 3, University of Denver, Plenum Press, New York, 1959, pp. 49–56.Google Scholar