Hostname: page-component-5c6d5d7d68-pkt8n Total loading time: 0 Render date: 2024-08-10T01:07:50.735Z Has data issue: false hasContentIssue false
  • English
  • Français

Energy Dispersive X-Ray Fluorescence Spectrometry at High Count Rates: Pulsed Tube Excitation and Recovery of Resolution by Computer Processing

Published online by Cambridge University Press:  06 March 2019

J . E. Stewart ,
H. R. Zulliger  and
W. E. Drummond
J . E. Stewart
Affiliation:
Nuclear Semiconductor Mountain View, California 94043
H. R. Zulliger
Affiliation:
Nuclear Semiconductor Mountain View, California 94043
W. E. Drummond
Affiliation:
Nuclear Semiconductor Mountain View, California 94043
Get access

Abstract

Energy dispersive X-ray spectrometry has the potential for making very rapid analyses of multi-element samples. In order to fully exploit this capability several studies have been carried out with the goal of improving performance at high input count rates. A refined amplifier permits operation at input count rates up to 80000 per second with minimal peak shift and distortion. Optimum choice of tube parameters and filters permits utilization of a single Mo transmission target tube to analyze a broad range of elements in minimum time. Use of a pulsed tube further reduces the time required for analysis without sacrifice of precision or resolution. Dead time necessarily increases with increasing input count rate. It can be reduced by selecting a short amplifier time constant, but only with a loss of resolution. Digital processing permits recovery of the lost resolution. Some illustrations are given of spectra that have been processed on-line using a computer based multi-channel analyzer.

Type
Mathematical Correction Procedures for X-Ray Spectrochemical Analysis
Information
Advances in X-Ray Analysis , Volume 19: Twenty-Fourth Annual Conference on Applications of X-ray Analysis, August 6-8, 1975 , 1975 , pp. 153 - 160
Copyright
Copyright © International Centre for Diffraction Data 1975

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Reed, S. J. B., “Pulse Pile-up Rejection in Si(Li) X-ray Detection Systems”, J . Phys. E. 5, 997 (1972).Google Scholar
2. Jaklevic, J. M., Goulding, F. S., and Landis, D. A., “High Rate X-ray Fluorescence Analysis by Pulsed Excitation”, IEEE Tran s.NucL Sci. 19. No. 3, 392 (1972).Google Scholar
3. Zulliger, H. R. and Stewart, J. E., “X-ray Fluorescence Analysis with Transmission Target Tube s”, in Pickles, W. J., Newkirk, J. B., Barrett, C. S., and Ruud, C. O.(eds), Advances in X-ray Analysis, vol. 18, 278, Plenum Press (1975).Google Scholar
4. Stewart, J. E., “Resolution Enhancement of X-ray Fluorescence Spectra with a Computerized Multichannel Analyzer”, Appl. Spect, 29, 171 (1975).Google Scholar
5. Burger, H. C. and Cittert, P. H. van, “Wahre und Scheinbare Inensitatsverteilung in Spektrallinien”, Physik, Z. 79. 722 (1932); 81, 428 (1933).Google Scholar