Hostname: page-component-5c6d5d7d68-thh2z Total loading time: 0 Render date: 2024-08-14T21:05:06.051Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study of X-Ray Fluorescence Method with Vacuum and Air-Path Spectrographs for the Determination of Film Thicknesses of II-VI Compounds

Published online by Cambridge University Press:  06 March 2019

Frank L. Chan
Frank L. Chan*
Affiliation:
Aerospace Research Laboratories Wright-Patterson Air Force Base, Ohio
Get access

Abstract

Films of II-VI compounds have been prepared by vacuum technique for the determination of their thicknesses. Some difficulties have been experienced in preparing good quality films- The positron of the substrate in the vacuum chamber, the rate of deposition, and the temperature of sublimation are some of the factors influencing the quality of these films. For instance, films of cadmium sulfide could be prepared in the usual yellow or orange color or in colors ranging from brown to black, depending on the conditions enumerated. For energy conversion, a film of proper thickness is one of the requirements for aerospace application. Among the various methods used for the determination of the thickness of these films, X-ray fluorescence can be performed rapidly and nondestructively. After determination of thickness by the X-ray fluorescence method, the samples can be used for other determinations and for energy conversion without their efficiency's having been affected. Other physical and chemical methods have been worked out. Comparison of these methods with the X-ray fluorescence method is made. Procedures and results are presented.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 11: Sixteenth Annual Conference on Applications of X-ray Analysis, August 9-11, 1967 , 1967 , pp. 191 - 203
Copyright
Copyright © International Centre for Diffraction Data 1967

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Revnolds, D. C., Leies, G., Antes, L. L., and Marburger, R. E., “Photovoltaic Effect in Cadmium Sulfide,” Phys. Rev. 96: 333, 1954.Google Scholar
2. Chan, Frank L., “Determination of Film Thickness of Cadmium Sulfide Used in Energy Conversion with Soft and Hard X-Rays,” paper presented at the 18th Annual Mid-America Symposium on Spectroscopy, May 15–18. 1967, Chicago, 111.Google Scholar
3. Chan, Frank L., “A Study of Silicon Determination in Organo-Silicon Compounds by X-ray Fluorescence with Vacuum Spectrograph,” in: P. W. Shallis (cd.), Proceedings of the SAC Conference, Nottingham, W. Haffer and Snns, Ltd., Cambridge, England, 1965, p. 89.Google Scholar
4. Chan, Frank L., “An Apparatus for the Analysis of Liquid Samples by the X-ray Fluorescence Method with Vacuum Spectrograph,” in; L. R. Pearson and E. L. Grove (eds.), Developments in Applied Spectroscopy, Vol. 5, Plenum Press, New York, 1966.Google Scholar
5. Birks, L. S., X-Ray Spectrockemical Analysis, Interscience Publishers, Inc., New York, 1959, p. 63.Google Scholar
6. Addink, N. W. H., “Optical and X-Ray Spectroscopy,” in; W. Wayne Meinke and Bourdon F. Scribner(eds.), Trace Characterisation, Natl. Bur. Std. (U.S.) Monograph 100: 121, 1967.Google Scholar
7. Liebhafsky, H. A. and Zemany, P. D., “Film Thickness by X-ray Emission Spectrography,” Anal. Chem. 28: 455, 1956.Google Scholar
8. Rhodin, T. N., “Chemical Analysis of Thin Films by X-ray Emission Spectrograph,” Anal. Chem. 27: 1857, 1955.Google Scholar
9. Chan, Frank L., “Detection Confirmation and Determination of Trace Amounts of Selenium by X-ray Methods,” in: W. M. Mueller, G. R. Mallett, and M. J. Fay (eds.), Advances in X-Ray Institute, Vol. 7, Plenum Press, New York, 1964.Google Scholar
10. Liebhafsky, H. A., Pfeiffer, H. G., Winslow, E. H., and Zemany, P. D., X-Ray Absorption and Emission in Analytical Chemistry, John Wiley and Sons, Inc., New York, 1960.Google Scholar
11. Birks, L. S., Brooks, E. J., and Friedman, H., “Fluorescent X-Ray Spectroscopy,” Anal. Chem. 25: 692, 1953.Google Scholar
12. Glang, Reinhard, Kren, John G., and Patrick, William J., “Vacuum Evaporation of Cadmium Telluride,” J. Electrochem. Soc. 110: 407, 1963.Google Scholar
13. Chan, Frank L., “Spot Test Detection of Sulfide in Minerals,. Anal. Chim. Acta 37: 391, 1967.Google Scholar
14. Feigl, Fritz, Spot Tests in Inorganic Analysis, Elsevier Publishing Co., Amsterdam, 1958, p. 364.Google Scholar