Hostname: page-component-5c6d5d7d68-tdptf Total loading time: 0 Render date: 2024-08-15T00:41:56.650Z Has data issue: false hasContentIssue false
  • English
  • Français

Coupled Vibration of Geared Systems

Published online by Cambridge University Press:  04 July 2016

S. Mahalingam
S. Mahalingam*
Affiliation:
Department of Mechanical Engineering, University of Ceylon, Peradeniya, Ceylon
Get access Rights & Permissions [Opens in a new window]

Extract

In the design of geared rotating systems in engineering practice a variety of configurations are used, and their torsional vibration has been extensively studied. Detailed analyses of the modes and frequencies of vibration of these systems have been given by Ker Wilson and Nestorides. When the rotating system is rigidly supported, standard methods may be used to obtain the characteristics of free vibration and the response to impressed forces, from which the transmissibility of the gear-box may be calculated. However, there are many applications in which the gearbox is flexibly mounted. The simple example of a geared engine with a flexibly mounted crankcase has been considered by Den Hartog and Butterfield. In some epicyclic gear-box assemblies, elastic elements are introduced between the reactive element and the gear-case to increase the capacity for absorbing impulsive loads and as a means of varying the natural frequencies of vibration'. Harmonic forces acting on the rotors excite coupled vibration of the rotating system and the supporting frame, and Ker Wilson has shown how the natural frequencies and modes of the combined system may be determined by Holzer-type tabular methods. This involves a trial-and-error technique which may sometimes be tedious. Vibration of geared systems may also be excited by the motion of the frame supporting the gear-box, and an analysis of the response is necessary in the determination of dynamic loads.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 72 , Issue 690 , June 1968 , pp. 522 - 526
Copyright
Copyright © Royal Aeronautical Society 1968 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ker Wilson, W. Practical Solution of Torsional Vibration Problems. Vol 1, Ch 4-6, p 157, Chapman and Hall, 1956.Google Scholar
2. Nestorides, E. J. (Editor). Bicera, Handbook on Torsional Vibration. Part I, p 160. Cambridge 1958.Google Scholar
3. Den Hartog, J. P. and Butterfield, J. P. The Torsional Critical Speeds of Geared Aeroplane Engines. J Aero Sci, Vol 4, No 12, p 487, 1937.Google Scholar
4. Plunkett, R. (Editor). Colloquium on Mechanical Impedance Methods. American Society of Mechanical Engineers. 1958.Google Scholar
5. Crandall, S. H. Impedance and Mobility Analysis of Lumped Parameter Systems. Colloquium on Mechanical Impedance Methods. ASME, 1958.Google Scholar
6. Mahalingam, S. Displacement Excitation of Vibrating Systems. (To be published) Google Scholar
7. Biot, M. A. Coupled Oscillations of Aircraft Engine-propeller Systems, J Aero, Sci, Vol 7. No 9, p 376, 1940.Google Scholar
8. Duncan, W. J. Mechanical Admittances and Their Applications to Oscillation Problems, R and M 2000, 1947, HMSO, 1947.Google Scholar
9. Bishop, R. E. D. and Johnson, D. C. The Mechanics of Vibration. Ch 3, p 85, Cambridge, 1960.Google Scholar
10. Fraeijs de Veubeke, B. M. Crankshaft-propeller Vibration Modes as Influenced by Torsional Flexibility of the Engine Suspension, J Aero Sci, Vol 17, No 5, p 288, 1950.Google Scholar