Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-03T10:26:17.209Z Has data issue: false hasContentIssue false
  • English
  • Français

A homogenisation-based continuum damage mechanics model for cyclic damage in 3D composites

Published online by Cambridge University Press:  03 February 2016

S. Ghosh  and
J. R. Jain
S. Ghosh
Affiliation:
ghosh.5@osu.edu, Computational Mechanics Research Laboratory, Department of Mechanical Engineering, Ohio State University, Ohio, USA
J. R. Jain
Affiliation:
jain.94@osu.edu, Computational Mechanics Research Laboratory, Department of Mechanical Engineering, Ohio State University, Ohio, USA
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper develops a 3D homogenisation based continuum damage mechanics (HCDM) model for fibre-reinforced composites undergoing micromechanical damage under cyclic loading. Micromechanical damage in a representative volume element (RVE) of the material occurs by fibre-matrix interfacial debonding, which is incorporated in the model through a hysteretic bilinear cohesive zone model. The proposed model expresses a damage evolution surface in the strain space in the principal damage co-ordinate system or PDCS. PDCS enables the model to account for the effect of non-proportional load history. The material constitutive law involves a fourth order orthotropic tensor with stiffness characterised as a macroscopic internal variable. Cyclic damage parameters are introduced in the monotonic HCDM model to describe the material degradation due to fatigue. Three dimensional damage in composites is accounted for through functional forms of the fourth order damage tensor in terms of components of macroscopic strain and elastic stiffness tensor. The HCDM model parameters are calibrated from homogenisation of micromechanical solutions of the RVE for a few representative cyclic strain histories. The proposed model is validated by comparing results of the HCDM model with pure micromechanical analysis results followed by homogenisation. Finally, the potential of cyclic HCDM model as a design tool is demonstrated through macro-micro analysis of cyclic damage progression in composite structures.

Type
Research Article
Information
The Aeronautical Journal , Volume 113 , Issue 1144: Flight structures fundamental research in the United States of America: A Special Issue , June 2009 , pp. 371 - 383
Copyright
Copyright © Royal Aeronautical Society 2009 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jain, J.R. and Ghosh, S., Damage evolution in composites with a homogenization based contiuum damage mechanics model, Int J Damage Mech, 2008, (in press).Google Scholar
2. Suresh, S., Fatigue of Materials, Cambridge University Press, 1996, Cambridge.Google Scholar
3. Hashin, Z. and Rotem, A., A fatigue criterion for fiber reinforced composite materials, J Composite Mater, 1973, 7, pp 448–464.Google Scholar
4. Gathercole, N., Reiter, H., Adam, T. and Harris, B., Life prediction for fatigue of t800/5245 carbon-fiber composites: I. constant amplitude loading, Int J Fatigue, 1994, 16, (8), pp 523–532.Google Scholar
5. Degrieck, J. and Paepegem, W.V., Fatigue damage modeling of fiber-reinforced composite materials: review, Appl Mech Rev, 2001, 54, (4), pp 279–300.Google Scholar
6. Talreja, R., Fatigue of Composite Materials, 1987, Technomic Pub Co.Google Scholar
7. Reifsnider, K.L., Life prediction analysis: directions and divagations, 1987, Proceedings of Sixth International Conference on Composite Materials, 4, pp 4.1–4.31.Google Scholar
8. Sidoroff, F. and Subagio, B., Fatigue damage modeling of composite materials from bending tests, 1987, Proceedings of Sixth International Conference on Composite Materials, 4, 4.32–4.39.Google Scholar
9. Whitworth, H.A., A stiffness degradation model for composite laminates under fatigue loading, Composite Struct, 1998, 40, (2), pp 95–101.Google Scholar
10. Kachanov, L.M., Introduction to Continuum Damage Mechanics, 1987, Nijhoff, M, Dordrecht, Boston.Google Scholar
11. Voyiadjis, G.Z. and Kattan, P.I., Advances in Damage Mechanics: Metals and Metal Matrix Composites with an Introduction to Fabric Tensors, 2006, Elsevier.Google Scholar
12. Krajicinovic, D., Damage Mechanics, 1996, Elsevier, Amsterdam.Google Scholar
13. Chaboche, J.L., Continuum damage mechanics: A tool to describe phenomena before crack initiation, Nuclear Enginering Design, 1981, 64, pp 233–247.Google Scholar
14. Simo, J.C. and Ju, J.W., Strain and stress-based continuum damage models, part i: Formulation, Int J Solids Struct, 1987, 23, (7), pp 821–840.Google Scholar
15. Chow, C.L. and Wang, J., An anisotropic theory of elasticity for continuum damage mechanics, Int J Frac, 1987, 20, pp 381–390.Google Scholar
16. Arnold, S.M. and Kruch, S., A differential cdm model for fatigue of unidirectional metal matric composites, 1991, NASA Technical Memorandum 105726.Google Scholar
17. Bhattacharya, B. and Ellingwood, B., A new cdm-based approach to structural deterioration, Int J Solids Struct, 1999, 36, pp 1757–1779.Google Scholar
18. Chow, C.L. and Wei, Y., Constitutive modeling of material damage for fatigue failure prediction. Int J Damage Mech, 1999, 8, pp 355–375.Google Scholar
19. Desmorat, R., Ragueneau, F., and Pham, H., Continuum damage mechanics for hysteresis and fatigue of quasi-brittle materials and structures, Int J Numer Anal Meth Geomech, 2007, 31, pp 307–329.Google Scholar
20. Fish, J., Yu, Q. and Shek, K., Computational damage mechanics for composite materials based on mathematical homogenization, Int J Numer Meth Engrg, 1999, 45, pp 1657–1679.Google Scholar
21. Chaboche, J.L., Kruch, S. and Pottier, T., Micromechanics versus macromechanics: a combined approach for metal matrix composite constitutive modeling, Eur J Mech A/Solids, 1998, 17, pp 885–908.Google Scholar
22. Ladeveze, P., An anisotropic damage theory with unilateral effects: Applications to laminates and to three- and four-dimensional composites, Cont Damage Mech Mater Struct, Allix, O. and Hild, F. (Eds), 2002, 1, pp 205–233.Google Scholar
23. Ju, J.W., Ko, Y.F. and Ruan, H.N., Effective elastoplastic damage mechanics for fiberreinforced composites with evolutionary complete fiber debonding. Int J Damage Mech, 2006, 15, (3), pp 237–265.Google Scholar
24. Akshantala, N.V. and Talreja, R., A micromechanics based model for predicting fatigue life of composite laminates, Mat Sci Engrg, 2000, A285, pp 303–313.Google Scholar
25. Echle, R. and Voyiadjis, G.Z., Simulation of damage evolution in a unidirectional titanium matrix composite subjected to high cycle fatigue, Int J Fatigue, 1999, 21, pp 909–923.Google Scholar
26. Fish, J. and Yu, Q., Computational mechanics of fatigue and life predictions for composite materials and structures. Comp Meth Appl Mech Enginering, 2002, 191, pp 4827–4849.Google Scholar
27. Kruch, S., Carrere, N. and Chaboche, J.L., Fatigue damage analysis of unidirectional metal matrix composites, Int J Fatigue, 2006, 28, pp 1420–1425.Google Scholar
28. Kouznetsova, V., Brekelmans, W.A.M. and Baaijens, F.P.T. An approach to micro-macro modeling of heterogeneous materials, Computational Mech, 2001, 27, pp 37–48.Google Scholar
29. Raghavan, P. and Ghosh, S., A continuum damage mechanics model for unidirectional composites undergoing interfacial debonding, Mech Mater, 2005, 37, (9), pp 955–979.Google Scholar
30. Feyel, F. and Chaboche, J.L., Fe2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre sic/ti composite materials, Comput Meth Appl Mech Enginering, 2000, 183, pp 309–330.Google Scholar
31. Ghosh, S., Bai, J. and Raghavan, P., Concurrent multi-level model for damage evolution in microstructurally debonding composites, Mech Mater, 2007, 39, (3), pp 241–266.Google Scholar
32. Li, S. and Ghosh, S., Debonding in composite microstructures with morphologic variations, Int J Computational Methods, 2004, 1, (1), pp 21–149.Google Scholar
33. Jain, J.R. and Ghosh, S., Homogenization based 3D contiuum damage mechanics model for composites undergoing microstructural debonding, J Appl Mech, 2008, 75, (3).Google Scholar
34. Cordebois, J.P. and Sidoroff, F., Anisotropic damage in elasticity and plasticity, J Mech Theor Appl, 1982, pp 45–60.Google Scholar
35. Murakami, S., Mechanical modeling of material damage, J Appl Mech, 1988, 55, pp 280–286.Google Scholar
36. Swaminathan, S., Pagano, N.J. and Ghosh, S., Analysis of interfacial debonding in three dimensional composite microstructures, J Engng Mater Tech, 2006, 128, pp 96–106.Google Scholar
37. Bhatnagar, H., Walter, M.E., and Ghosh, S., A parametric domain map for top coat damage initiation and propagation in eb-pvd thermal barrier coatings, Int J Multiscale Compu Engrg, 2007, 5, pp 227–242.Google Scholar
38. Pellegrino, C., Galvanetto, U. and Schrefler, B.A., Numerical homogenization of periodic composite materials with non-linear material components, Int J Numer Meth Engrg, 1999, 46, pp 1609–1637.Google Scholar
39. Abaqus Users Manual, 2001, Hibbit, Karlsson and Sorensen.Google Scholar
40. Lene, F. and Leguillon, D., Homogenized constitutive law for a partially cohesive composite material, Int J Solids Struct, 1982, 18, (5), pp 443–458.Google Scholar
41. Guedes, J.M. and Kikuchi, N., Preprocessing and post processing for materials based on the homogenization method with adaptive finite element methods, Comp Meth in Appl Mech and Engng, 1991, 83, pp 143–198.Google Scholar