Hostname: page-component-77c89778f8-swr86 Total loading time: 0 Render date: 2024-07-19T11:48:05.238Z Has data issue: false hasContentIssue false

Optimal aircraft take-off with thrust vectoring

Published online by Cambridge University Press:  27 January 2016

A.K. Vinayagam*
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Madras, Chennai, India
N.K. Sinha
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Madras, Chennai, India

Abstract

The short take-off capability is of paramount importance for a fighter airplane to enable its operation from short and damaged runways. This paper analyses the airplane take-off process from the viewpoint of reducing the ground roll/take-off distance with the use of thrust vectoring. The airplane take-off is modelled incorporating the ground reactions on the landing gear and the thrust vector forces and moments. The take-off problem is formulated as an optimal control problem with appropriate constraints. Though many researchers have applied optimal control techniques for designing airplane manoeuvres, its application to the airplane take-off problem is rarely available in the open literature. It is expedient to use such methodology to understand the use of thrust vectoring features of an aircraft to maximise the benefits in shortening the ground roll/take-off distance. An optimal control methodology has been applied in this paper with the objectives stated above to a twin-engine fighter nonlinear aircraft model popularly known as F-18/HARV. Computation of flight path and control schedules using optimal control has been carried out with and without the use of vector nozzles. A reduction of about 6% in take-off distance and about 29% in ground roll distance is obtained with the use of thrust vector for the configuration studied.

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ikaa, D. Thrust vectoring nozzle for modern military aircraft, 2000, NATO R&T Organizations Symposium on Active Control Technology for Enhanced Performance, 8-11 May 2000, Braunschweig, Germany.Google Scholar
2. Ross, H. and Huber, P. Application of thrust vectoring to future aircraft design, September 1995, AGARD-CP-572.Google Scholar
3. Alcorn, C.W., Croom, M.A., Francis, M.S. and Ross, H. The X-31 aircraft: Advances in aircraft agility and performance, Prog Aerospace Sci, 1996, 32, pp 277413.Google Scholar
4. Baokai, Z. Preliminary study on effects of thrust vectoring, 1995, NAIC-ID (RS)T-0212-95.Google Scholar
5. Albion, H., Bowers, J.W.P. Thrust vectoring on the NASA F-18 high alpha research vehicle, 1996, NASA-TM-4771.Google Scholar
6. O’Rourke, M.J., Ralston, J.N. and Bell, J.W. PC-based simulation of the F-16/MATV, 1997, AIAA-3728.Google Scholar
7. Smolka, J.W., Walker, L.A., Johnson, G.H. and Schkolnik, G.S. F-15 ACTIVE flight research program, NASA Dryden Flight Research Center, http://www.nasa.gov/centers/dryden/pdf/89247main_setp_d6.pdf Google Scholar
8. Pashilkar, A.A. Algorithms for aircraft trim analysis on ground, 1996, AIAA-3505-CP.Google Scholar
9. Larson, T.J. and Schweikhard, W.G. A simplified flight test method for determining aircraft take-off performance that includes the effect of pilot techniques, 1974, NASA TN D-7603.Google Scholar
10. Calvert, J.F. Method for the determination and optimization of vectored thrust take-off performance, January 1988, Technical Memo, Strike Aircraft Test Directorate, Naval Air Test Center, Patuxent River, Maryland, USA.Google Scholar
11. Carter, B.R. Time Optimization of High Performance Combat Manoeuvres, 2005, MSc thesis, Naval Postgraduate School.Google Scholar
12. Fan, Y., Lutze, F. and Cliff, E. Time-optimal lateral manoeuvres of an aircraft, J Guidance, Control and Dynamics, September-October1995, 18, (5), pp 11061112.Google Scholar
13. Takano, H., Wada, H., Yamasaki, T. and Baba, Y. Optimal vertical manoeuvres of the aircraft with thrust vectoring in the rigid body model, 2007, International Conference on Control, Automation and Systems, 17-20 October 2007, Seoul, South Korea.Google Scholar
14. Satyanarayana, G., Prasad, U.R. and Sarma, I.G. Optimal control for the rolling pullout manoeuvre of a modern fighter aircraft, 1975, IEEE Conference on Decision and Control, Houston, December 1975, Texas, USA.Google Scholar
15. Buell, G. and Leondes, C.T. Optimal aircraft go-around and fare manoeuvre, IEEE Transactions on Aerospace and Electronic Systems, March 1973, 9, (2).Google Scholar
16. Ong, S.Y., Pierson, B.L. and Lin, C.F. Optimal evasive aircraft manoeuvres against a surface-to-air missile, IEEE Regional Conference on Aerospace Control Systems, 25-27 May 1993.Google Scholar
18. Iliff, K.W. and Wang, K.C. Flight-determined subsonic longitudinal stability and control derivatives of the F-18 high angle of attack research vehicle (HARV) with thrust vectoring, 1997, NASA-TP-206539.Google Scholar
19. Bowers, A.H. and Pahle, J.W. Thrust vectoring on the NASA F-18 high alpha research vehicle, 1996, NASA-TM-4771.Google Scholar
21. Mattingly, J.D. Aircraft Engine Design, Second edition, 2002, AIAA Educational Series.Google Scholar
22. Subchan, S. and Zbikowski, R. Computational Optimal Control — Tools and Practice, 2009, John Wiley & Sons.Google Scholar
23. Rao, A.V. User’s Manual for GPOPS Version 4.x: A MATLAB software for solving multiple-phase optimal control problems using hp-adaptive pseudospectral methods, 2011.Google Scholar