Hostname: page-component-77c89778f8-vpsfw Total loading time: 0 Render date: 2024-07-22T03:23:08.271Z Has data issue: false hasContentIssue false
  • English
  • Français

Large-eddy simulation of separated flow over a swept wing with approximate near-wall modelling

Published online by Cambridge University Press:  03 February 2016

N. Li  and
M. A. Leschziner
N. Li
Affiliation:
Imperial College, London, UK
M. A. Leschziner
Affiliation:
Imperial College, London, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

The paper investigates, by means of a simulation methodology, the flow separating from a 40 degrees backward-swept wing at 9 degrees incidence and Reynolds number of 210,000, based on the wing-root chord length. The Simulation corresponds to LDA, PIV and suction-side-topology measurements for the same geometry, conducted by other investigators specifically to provide validation data. The finest block-structured mesh contains 23·6 million nodes and is organised in 256 blocks to maximise mesh quality and facilitate parallel solution on multi-processor machines. The near-wall layer is resolved, to a thickness of about y+ = 20, by means of parabolised URANS equations that include an algebraic eddy-viscosity model and from which the wall-shear stress is extracted to provide an unsteady boundary condition for the simulation. The numerical solution is in good agreement with the experimental behaviour over the 50-70% inboard portion of the span, but the simulation fails to resolve some complex features close to the wing tip, due to a premature leading-edge vortex breakdown and loss in vortex coherence. The comparisons and their discussion provide useful insight into various physical characteristics of this complex separated wing flow.

Type
Research Article
Information
The Aeronautical Journal , Volume 111 , Issue 1125 , November 2007 , pp. 689 - 697
Copyright
Copyright © Royal Aeronautical Society 2007 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Gordnier, R.E.. Computational study of a turbulent delta-wing flowfield using two-equation turbulence models, 1996, AIAA paper 96-2076.Google Scholar
2. Rizzetta, D.P.. Numerical simulation of the interaction between leading-edge vortex and vertical tail, AIAA J, 1997, 35, pp 756–757.Google Scholar
3. Mary, I.. Large eddy simulation of vortex breakdown behind a delta wing, Int J Heat and Fluid Flow, 2003, 24, (4), pp 596–605.Google Scholar
4. Huai, X., Joslin, R.D. and Piomelli, U.. Large-eddy simulation of boundary layer transition on swept wings, Transition, turbulence and combustion; Proceedings of the Workshop, Hampton, VA, USA; Netherlands; 7 June-2 July 1993, pp 369–378.Google Scholar
5. Zhang, S., Jaworski, A.J., Turner, J. and Wood, N.J.. Separation and vortex generation in the flow over a highly swept wing, an experimental study based on three-component LDA measurement, to appear in Aeronaut J.Google Scholar
6. Temmerman, L., Leschziner, M.A. and Hanjalić, K.. A-priori studies of a near-wall RANS model within a hybrid LES/RANS scheme, Engineering Turbulence Modelling and Experiments 5. Rodi, W. and Fueyo, N. (Eds), Elsevier, 2002, 317–326.Google Scholar
7. Germano, M., Piomelli, U., Moin, P. and Cabot, W.H.. A dynamic subgrid-scale eddy viscosity model, Physics of Fluids A: Fluid Dynamics, 1991, 3, (7), pp 1760–1765.Google Scholar
8. Tessicini, F., Temmerman, L. and Leschziner, M.A.. Approximate near-wall treatments based on zonal and hybrid RANSLES methods for LES at high Reynolds numbers, Int J Heat and Fluid Flow, 2006, 27, (5), pp 789–799.Google Scholar
9. Tessicini, F., Li, N. and Leschziner, M.A.. Large-eddy simulation of three-dimensional flow around a hill-shaped obstruction with a zonal near-wall approximation, Int J Heat and Fluid Flow, 2007, 28, (5), pp 894–908.Google Scholar
10. Leschziner, M.A., Li, N. and Tessicini, F.. Computational methods combining LES with approximate wall-layer models for predicting separated turbulent near-wall flows, Wall Modelling in LES: Method Development and Application, ERCOFTAC Bulletin, 72, 2007.Google Scholar
11. Temmerman, L., Hadziabdic, M., Leschziner, M.A. and Hanjalić, K.. A hybrid two-layer URANS-LES approach for large eddy simulation at high Reynolds numbers, Int J Heat and Fluid Flow, 2004, 26, (2), pp 173–190.Google Scholar