Hostname: page-component-5c6d5d7d68-sv6ng Total loading time: 0 Render date: 2024-08-09T15:30:19.581Z Has data issue: false hasContentIssue false
  • English
  • Français

Natural Frequencies of Long Tapered Cantilevers

Published online by Cambridge University Press:  07 June 2016

W. Carnegie  and
J. Thomas
W. Carnegie
Affiliation:
Department of Mechanical Engineering, University of Surrey
J. Thomas
Affiliation:
Department of Mechanical Engineering, University of Surrey
Get access

Summary

The effect of depth taper on the flexural vibration characteristics of a beam of uniform width is investigated in this paper. The frequency parameters and mode shapes for the first five modes of vibration of tapered beams are presented for a wide range of depth taper. The Euler-Bernoulli equation of a beam is reduced to an eigenvalue problem and its eigenvalues and eigenvectors are obtained by using a digital computer. The theoretical results are compared with those of other authors and with the experimental results.

Type
Research Article
Information
Aeronautical Quarterly , Volume 18 , Issue 4 , November 1967 , pp. 309 - 320
Copyright
Copyright © Royal Aeronautical Society. 1967

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Martin, A. I. Some integrals relating to the vibration of a cantilever beam and approximations for the effect of taper on overtone frequencies. Aeronautical Quarterly, Vol. VII, p. 109, May 1956.CrossRefGoogle Scholar
2. Rao, I. S. The fundamental flexural vibration of a cantilever beam of rectangular cross-section with uniform taper. Aeronautical Quarterly, Vol. XVI, p. 139, May 1965.CrossRefGoogle Scholar
3. Housner, G. W. and Keightley, W. O. Vibrations of linearly tapered cantilever beams. Proceedings of the American Society of Civil Engineers, Vol. 88, No. EM2, p. 95, April 1962.Google Scholar
4. Rissone, R. F. and Williams, J. J. Vibrations of non-uniform cantilever beams. The Engineer, Vol. 220, p. 497, 24th September 1965.Google Scholar
5. Fox, L. Two-point boundary problems, p. 129. Oxford University Press, London, 1951.Google Scholar
6. Carnegie, W., Dawson, B. and Thomas, J. Vibration characteristics of cantilever blading. Proceedings of the Institution of Mechanical Engineers, Vol. 180, Part 31, p. 71, 1965-66.Google Scholar