Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-23T16:23:54.824Z Has data issue: false hasContentIssue false
  • English
  • Français

Non-Linear Stress-Strain Effects in the Flexural Wrinkling of Carbon Fibre Honeycomb Sandwich Beams

Published online by Cambridge University Press:  07 June 2016

A.K. Ditcher  and
J.P.H. Webber
A.K. Ditcher
Affiliation:
Department of Aeronautical Engineering, University of Bristol
J.P.H. Webber
Affiliation:
Department of Aeronautical Engineering, University of Bristol
Get access

Summary

A theoretical analysis of the flexural wrinkling of a honeycomb sandwich beam with laminated faces having non-linear stress-strain behaviour is presented. Appropriate tangent moduli are used in the constitutive equations for the compression face and a double iteration technique is used to calculate wrinkling loads. Numerical results are given for sandwich beams with unidirectional and cross-ply carbon fibre reinforced plastic (CFRP) faces. Experimental failure loads of sandwich beams are compared with theoretical predictions, and, in general, the agreement between the two is good.

Type
Research Article
Information
Aeronautical Quarterly , Volume 33 , Issue 1 , February 1982 , pp. 1 - 24
Copyright
Copyright © Royal Aeronautical Society. 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Ditcher, A.K., Rhodes, F.E. and Webber, J.P.H. Non-linear stress-strain behaviour of carbon fibre reinforced plastic laminates. J. Strain Analysis, Vol. 16, 1981, pp 43-51.Google Scholar
2 Ditcher, A.K. and Webber, J.P.H. Non-linear mechanical and thermal responses of a unidirectional carbon fibre reinforced plastic. J. Strain Analysis, Vol. 14, 1979, pp 149-156.Google Scholar
3 Gutierrez, A.J. and Webber, J.P.H. Flexural wrinkling of honeycomb sandwich beams with laminated faces. Int. J. Solids Structures, Vol. 16, 1980, pp 645-651.CrossRefGoogle Scholar
4 Webber, J.P.H., Kyriakides, S., and Lee, C.T. On the wrinkling of hsneyeemb sandwich columns with laminated cross-ply faces. The Aero J., June 1976, pp 264-272.CrossRefGoogle Scholar
5 Jones, R.M. Mechanics of Composite Materials. McGraw Hill, 1975.Google Scholar
6 Ashton, J.E. Approximate solutions for unsymmetrically laminated plates. J. Comp. Mats. Vol. 3, January 1969, pp 189-191 CrossRefGoogle Scholar