Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-21T14:39:09.202Z Has data issue: false hasContentIssue false

Measuring non-exchangeable tail dependence using tail copulas

Published online by Cambridge University Press:  28 February 2023

Takaaki Koike*
Affiliation:
Graduate School of Economics, Hitotsubashi University, Kunitachi, Tokyo 186-8601, Japan
Shogo Kato
Affiliation:
Risk Analysis Research Center, Institute of Statistical Mathematics, Tachikawa, Tokyo 190-8562, Japan
Marius Hofert
Affiliation:
Department of Statistics and Actuarial Science, Faculty of Science, The University of Hong Kong, Pokfulam, Hong Kong
*
*Corresponding author. E-mail: takaaki.koike@r.hit-u.ac.jp
Rights & Permissions [Opens in a new window]

Abstract

Quantifying tail dependence is an important issue in insurance and risk management. The prevalent tail dependence coefficient (TDC), however, is known to underestimate the degree of tail dependence and it does not capture non-exchangeable tail dependence since it evaluates the limiting tail probability only along the main diagonal. To overcome these issues, two novel tail dependence measures called the maximal tail concordance measure (MTCM) and the average tail concordance measure (ATCM) are proposed. Both measures are constructed based on tail copulas and possess clear probabilistic interpretations in that the MTCM evaluates the largest limiting probability among all comparable rectangles in the tail, and the ATCM is a normalized average of these limiting probabilities. In contrast to the TDC, the proposed measures can capture non-exchangeable tail dependence. Analytical forms of the proposed measures are also derived for various copulas. A real data analysis reveals striking tail dependence and tail non-exchangeability of the return series of stock indices, particularly in periods of financial distress.

Type
Research Article
Copyright
© The Author(s), 2023. Published by Cambridge University Press on behalf of The International Actuarial Association

1. Introduction

The dependence between two continuous random variables $X\sim F$ and $Y\sim G$ is characterized by their copula $C\;:\;[0,1]^2\rightarrow [0,1]$ , that is the distribution function of (F(X), G(Y)). Of particular interest in extreme value analysis is to quantify dependence in tail regions, so to summarize the tendency for X and Y to jointly take on extremely small (or large) values. According to Ledford and Tawn (Reference Ledford and Tawn1996, Reference Ledford and Tawn1997), Ramos and Ledford (Reference Ramos and Ledford2009) and Hua and Joe (Reference Hua and Joe2011), (lower) tail dependence of the bivariate random vector (X, Y) can be described by the tail order $1/\eta$ , where $\eta\in (0,1]$ , and the tail dependence parameter $\lambda\geq 0$ such that

\begin{align*}C(p,p) \simeq l(p)\,p^{1/\eta}\quad (p \downarrow 0)\quad\text{and}\quad\lambda=\lim_{p\downarrow 0}\,l(p)\end{align*}

for some slowly varying function $l\;:\;\mathbb{R}_{+}\rightarrow \mathbb{R}_{+}=[0,\infty)$ , where $f\simeq g$ ( $x \rightarrow y$ ) for $f,g\;:\;\mathbb{R}\rightarrow \mathbb{R}$ means that $\lim_{x\rightarrow y}f(x)/g(x)=1$ for $y \in \mathbb{R}\cup\{\pm \infty\}$ .

The case when $\eta=1$ is of particular importance in insurance and risk management, for example, where the Gaussian copula has been blamed as a result of financial crisis of 2007–2009; see Embrechts (Reference Embrechts2009) and Donnelly and Embrechts (Reference Donnelly and Embrechts2010). When $\eta=1$ , the tail dependence parameter $\lambda(C)=\lim_{p\downarrow 0}C(p,p)/p$ is also known as the tail dependence coefficient (TDC, Sibuya Reference Sibuya1960). It is used for measuring tail dependence; see, for example, Aloui et al. (Reference Aloui, Aïssa and Nguyen2011) and Garcia and Tsafack (Reference Garcia and Tsafack2011) for financial applications. Despite its popularity, the TDC is known to underestimate the degree of tail dependence since it quantifies the speed of decay of the joint tail probability only along the main diagonal of C. In addition, the TDC does not capture non-exchangeable tail dependence in the sense that $\lambda(C)$ always equals $\lambda(C^{\top})$ , where $C^{\top}$ is the copula of (Y, X); see Hua et al. (Reference Hua, Polansky and Pramanik2019) and Bormann and Schienle (Reference Bormann and Schienle2020) for recent analyses of tail non-exchangeability. Furman et al. (Reference Furman, Su and Zitikis2015) addressed these issues and proposed variants of the TDC where the main diagonal is replaced by the path maximizing the joint tail probability. Calculation and estimation of such tail indices may not always be straightforward due to the difficulty of deriving the path of maximal dependence for a given copula C; see Sun et al. (Reference Sun, Yang and Zitikis2020, Reference Sun, Yang and Zitikis2022) for recent progress on estimating such tail indices. A similar measure of non-exchangeable tail dependence $\operatorname{limsup}_{(u,v)\downarrow(0,0)}C(u,v)/(u+v)$ has also been considered in Genest and Jaworski (Reference Genest and Jaworski2021).

In this paper, we construct measures of non-exchangeable tail dependence, called the tail concordance measures (TCMs), based on the so-called tail copula. The tail copula of $(U,V)\sim C$ is defined by

\begin{align*}\Lambda(u,v)=\lim_{p\downarrow 0}\frac{C(pu,pv)}{p}=\lim_{p\downarrow 0}\frac{\mathbb{P}((U,V)/p \in [0,u]\times[0,v])}{p},\quad (u,v) \in \mathbb{R}_{+}^2.\end{align*}

The tail copula is a generalization of the TDC and plays an important role in extreme value analysis; see Jaworski (Reference Jaworski2004), Schmidt and Stadtmüller (Reference Schmidt and Stadtmüller2006), Klüppelberg et al. (Reference Klüppelberg, Kuhn and Peng2007), Nikoloulopoulos et al. (Reference Nikoloulopoulos, Joe and Li2009) and Joe et al. (Reference Joe, Li and Nikoloulopoulos2010). We construct measures of tail dependence based on the subset

(1.1) \begin{align}\left\{\Lambda\left(b,\frac{1}{b}\right)\;:\; b \in (0,\infty)\right\}.\end{align}

Elements in the reference set (1.1) are comparable with each other as limiting tail probabilities evaluated at the rectangles $[0,b]\times[0,1/b]$ , $b \in (0,\infty)$ , all having the equal volume $b\times (1/b)=1$ . Based on this interpretation, we propose two measures of tail dependence; one is the maximal tail concordance measure (MTCM), defined as the supremum over (1.1), and another is the $\mu$ -average tail concordance measure (ATCM), defined as the normalized average over (1.1) weighted by what we call an angular measure $\mu\;:\;\mathfrak B((0,\infty))\rightarrow [0,1]$ , where $\mathfrak B((0,\infty))$ denotes the Borel $\sigma$ -algebra on $(0,\infty)$ . An illustration of the two measures is provided in Figure 1. Inspired by the tail indices proposed by Furman et al. (Reference Furman, Su and Zitikis2015), the MTCM is constructed to extract the most distinctive feature of tail dependence. On the other hand, the ATCM, regarded as a generalization of the tail dependence measure studied in Schmid and Schmidt (Reference Schmid and Schmidt2007), can be used when specific elements in (1.1) are of particular importance from a practical point of view. Therefore, the two measures quantify different but important features of non-exchangeable tail dependence summarized by tail copulas.

Figure 1. Scatter plot of the survival Marshall–Olkin copula $\hat{C}_{\alpha,\beta}^{\text{MO}}$ for $(\alpha,\beta)=(0.353,0.75)$ and its tail concordance measures. The lower TDC $\lambda$ evaluates the limiting tail probability at the square colored in red. The $\mu$ -ATCM $\lambda_\mu$ is a normalized average of $\Lambda$ over all comparable rectangles (green) weighted by the measure $\mu$ . Finally, the MTCM $\lambda^\ast$ is the maximum of limiting tail probabilities over all comparable rectangles, which is attained for the rectangle highlighted in blue.

We also introduce an axiomatic framework of tail dependence measures based on tail copulas as an analog to that introduced in Scarsini (Reference Scarsini1984) for measures of concordance. The TCMs introduced above are then shown to satisfy all the axiomatic properties naturally required to quantify tail dependence, such as the monotonicity with respect to an appropriate order among tail copulas and the normalization property where the TCM takes the maximum 1 and the minimum 0 if and only if the underlying tail copula represents the so-called tail comonotonicity and tail independence, respectively. In particular, we investigate the relationship of the proposed measures with tail comonotonicity motivated by Hua and Joe (Reference Hua and Joe2012a,b) and Cheung et al. (Reference Cheung, Ling, Tang, Yam and Yuen2019), the recent studies of tail comonotonicity in the context of risk measures.

Examples of the angular measure $\mu$ and the corresponding ATCM are also provided from the viewpoint of mathematical tractability and practical use. Our construction of TCMs based on the reference set (1.1) provides a clear probabilistic interpretation of the angular measure $\mu$ and thus enables us to construct flexible tail dependence measures according to the purpose of the analysis. As an example in credit risk modeling, some elements in (1.1) can be understood as limiting probabilities of joint default when C models the dependence between the values of two firms. In this situation, the measure $\mu$ can be chosen to put more weight on these elements.

Analytical forms of the proposed measures for a variety of parametric models are also provided; see Table 1. Since tail copulas can be obtained as simple limits of the underlying copula, analytical forms of the proposed TCMs are typically available. Admitting analytical forms is beneficial when parametric copulas are estimated by matching the corresponding TCMs to their empirical counterparts. From Table 1, we observe that the MTCM is higher than the TDC for non-exchangeable copulas (1), (4) and (5) whereas the MTCM coincides with the TDC for exchangeable copulas (2) and (3). On the other hand, exchangeable copulas (2) and (3) have higher ATCMs compared with others, all of which have the same values of the TDC.

Table 1. Analytical forms and examples for specific numerical values of the TDC and the proposed tail dependence measures; see Section 3.3 for details.

Together with the probabilistic interpretability, we believe that the proposed TCMs can be useful in various practical situations to quantify tail dependence. Numerical studies are also conducted to demonstrate the practical use of the proposed TCMs. Our simulation studies show that different features of tail dependence are captured by the proposed two measures. A real data analysis then reveals striking tail dependence and tail non-exchangeability of the return series of stock indices particularly in the periods of financial distress.

The present paper is organized as follows. Section 2 presents the framework for measuring tail dependence based on tail copulas. Section 3 introduces the proposed tail concordance measures. Axiomatic properties and examples for various parametric copulas are also provided. Simulation and empirical studies are conducted in Section 4. Section 5 concludes with ideas for future research directions. Technical supplements, proofs and statistical inference of the proposed measures can be found in the appendix.

2. Tail copulas and tail concordance measures

Let $\mathcal C_2$ be the set of all 2-copulas, that is, bivariate distribution functions with standard uniform margins. The comonotonicity and independence copulas are defined by $M(u,v)=\min(u,v)$ and $\Pi(u,v)=uv$ for $(u,v)\in [0,1]^2$ , respectively. For $(U,V)\sim C \in \mathcal C_2$ , the limit

(2.1) \begin{align}\Lambda(u,v)=\Lambda(u,v;\;C)=\lim_{p\downarrow 0}\frac{C(pu,pv)}{p}=\lim_{p\downarrow 0}\frac{\mathbb{P}((U,V)/p \in [0,u]\times[0,v])}{p},\quad (u,v) \in \mathbb{R}_{+}^2,\end{align}

provided it exists, is called a tail copula, also known as a tail dependence function. Throughout this paper, we focus only on the lower tail around the origin (0,0) in $[0,1]^2$ since tail dependence around the other three corners (1,0), (0,1), (1,1) can be studied by replacing C with its rotated copulas. The existence of $\Lambda(\!\cdot;\;C)$ can equivalently be stated in terms of the so-called tail expansion of C; see Jaworski (Reference Jaworski2004, Reference Jaworski2006, Reference Jaworski2010) for details. Basic properties of tail copulas are summarized in Appendix A. Let

\begin{align*}\mathcal C_2^{\text{L}}=\left\{C\in\mathcal C_2\;:\; \lim_{p\downarrow0}\frac{C(pu,pv)}{p}\text{ exists for every } (u,v) \in \mathbb{R}_{+}^2\right\}\end{align*}

be the set of all copulas admitting tail copulas, and let

\begin{align*}\mathcal L=\left\{\Lambda\;:\;\mathbb{R}_{+}^2\rightarrow \mathbb{R}_{+}\;:\;\text{ there exists $C\in \mathcal C_2$ such that }\Lambda(u,v)=\lim_{p\downarrow 0}\frac{C(pu,pv)}{p}\right\}\end{align*}

be the set of all tail copulas. By construction, $\mathcal C_2^{\text{L}}$ and $\mathcal L$ are convex sets. Moreover, the inclusion relationship $\mathcal C_2^{\text{L}}\subseteq \mathcal C_2$ is strict; see Jaworski (Reference Jaworski2010, Corollary 8.3.2).

The following concepts are fundamental for quantifying tail dependence summarized by tail copulas.

Definition 2.1 (Tail dependence and tail concordance order). Let $C,\,C' \in \mathcal C_2^{\textrm{L}}$ with $\Lambda=\Lambda(\!\cdot;\;C)$ and $\Lambda'=\Lambda(\!\cdot;\;C')$ .

  1. (1) (Tail independence) C (or $\Lambda$ ) is called tail independent if $\Lambda\equiv 0$ , and it is called tail dependent if $\Lambda \not\equiv 0$ .

  2. (2) (Tail comonotonicity) C (or $\Lambda$ ) is called tail comonotonic if $\Lambda=\overline \Lambda$ , where

    \begin{align*}\overline \Lambda(u,v)=\min(u,v),\quad (u,v)\in \mathbb{R}_{+}^2.\end{align*}
  3. (3) (Tail concordance order) C (or $\Lambda'$ ) is said to be more tail concordant than C (or $\Lambda$ ), denoted by $C \preceq_{\textrm{L}} C'$ (or $\Lambda \preceq \Lambda'$ ), if $\Lambda(u,v)\leq \Lambda'(u,v)$ for all $(u,v)\in \mathbb{R}_{+}^2$ .

Note that $\Pi$ is tail independent and M is tail comonotonic. Therefore, we have that $0, \overline \Lambda \in \mathcal L$ . Roughly speaking, tail comonotonicity means that the underlying copula behaves like the comonotonic copula M in the tail. Detailed discussions on the notion of tail comonotonicity, particularly related to asymptotic behavior of risk measures, can be found in Hua and Joe (Reference Hua and Joe2012a,b) and Cheung et al. (Reference Cheung, Ling, Tang, Yam and Yuen2019). On the other hand, tail independence means that the joint probability C(pu, pv) vanishes faster than p. By Proposition A.1(5), a tail copula $\Lambda$ is tail independent if and only if there exists $u_0,v_0>0$ such that $\Lambda(u_0,v_0)=0$ . Moreover, as stated in Proposition A.1(7), the tail copulas 0 and $\overline \Lambda$ are the minimal and maximal elements in $\mathcal L$ with respect to the tail concordance order, that is, $0\preceq \Lambda \preceq \overline \Lambda$ for all $\Lambda \in \mathcal L$ . In fact, Jaworski (Reference Jaworski2004) showed that $\mathcal L$ can be characterized by

\begin{align*}\mathcal L=\{\Lambda\;:\;\mathbb{R}_{+}^2\rightarrow \mathbb{R}_{+}\;:\;\Lambda \text{ is positive homogeneous, 2-increasing and } 0\preceq \Lambda\preceq \overline \Lambda\};\end{align*}

see Proposition A.1(1) and (4) for the properties of 2-increasingness and positive homogeneity of tail copulas. A key property of tail copulas is the positive homogeneity

(2.2) \begin{align}\Lambda(tu,tv)=t\Lambda(u,v)\quad\text{for every}\quad t \geq 0 \quad\text{and}\quad (u,v)\in \mathbb{R}_{+}^2,\end{align}

which leads to the following equivalent relations to the tail concordance order.

Proposition 2.2 (Properties related to the tail concordance order). Let $C,\,C' \in \mathcal C_2^{\textrm{L}}$ with $\Lambda=\Lambda(\!\cdot;\;C)$ and $\Lambda'=\Lambda(\!\cdot;\;C')$ .

  1. (1) Let $\theta \mapsto r_\theta \in (0,\infty)$ , $\theta \in (0,\pi/2)$ , be arbitrary. Then $\Lambda \preceq\Lambda'$ if and only if

    (2.3) \begin{align}\Lambda(r_\theta\cos\theta,r_\theta\sin\theta)\leq \Lambda'(r_\theta\cos\theta,r_\theta\sin\theta)\quad\text{for every} \quad \theta \in \left(0,\frac{\pi}{2}\right).\end{align}
  2. (2) We have that $C \preceq_{\text{L}} C'$ if and only if, for $(U,V)\sim C$ and $(U',V')\sim C'$ ,

    \begin{align*}\lim_{p\downarrow 0}\mathbb{P}(U\leq pu\,|\, V \leq p)&\leq \lim_{p\downarrow 0}\mathbb{P}(U'\leq pu\,|\, V' \leq p)\quad\text{for every}\quad u \in (0,1],\quad\text{and}\\[5pt] \lim_{p\downarrow 0}\mathbb{P}(V\leq pv\,|\, U \leq p)&\leq \lim_{p\downarrow 0}\mathbb{P}(V'\leq pv\,|\, U' \leq p)\quad\text{for every}\quad v \in (0,1].\end{align*}

By Proposition 2.2(1), the relationship $\Lambda\preceq \Lambda'$ can be simplified to checking the pointwise inequality between $\Lambda$ and $\Lambda'$ at one representative point $(r_\theta\cos\theta,r_\theta\sin\theta)$ for each angle $\theta \in (0,\pi/2)$ . Part (2) provides an intuitive interpretation of the order $\Lambda \preceq \Lambda'$ by the monotonicity of limiting tail probabilities. Related orders implied by $\Lambda\preceq \Lambda'$ can be found in Li (Reference Li2013).

Remark 2.3. Independently of the present paper, the tail concordance order has recently been introduced and explored in Siburg et al. (Reference Siburg, Strothmann and Weiß2022) and Siburg and Strothmann (Reference Siburg and Strothmann2022).

Example 2.4 (Tail concordance order for extreme value copulas). A bivariate extreme value (EV) copula is given by

\begin{align*}C_A(u,v)=\exp\left\{(\log u + \log v)A\left(\frac{\log u}{\log u + \log v}\right)\right\},\quad (u,v)\in [0,1]^2,\end{align*}

where $A \in \mathcal A$ is the so-called Pickands dependence function with

\begin{align*} \mathcal A = \{A\;:\;[0,1]\rightarrow [1/2,1]\;:\;\text{convex and }\max(w,1-w)\leq A(w)\leq 1\text{ for all }w \in [0,1]\}.\end{align*}

For instance, $A\equiv 1$ yields $C_A=\Pi$ and $A(w)=\max(w,1-w)$ yields $C_A=M$ . Using the relationships $\log(1-x)\simeq -x$ and $1-x \simeq e^{-x}$ ( $x \downarrow 0$ ), it is straightforward to check that the survival copula of $C_A$ has the tail copula

(2.4) \begin{align}\Lambda(u,v;\;\hat{C}_A)=u+v-(u+v)A\left(\frac{u}{u+v}\right),\quad (u,v)\in\mathbb{R}_{+}^2.\end{align}

By Equation (2.4), the tail concordance order $C_A\preceq_{\text{L}} C_{A'}$ for $A, A' \in \mathcal A$ is equivalent to $A'(w)\leq A(w)$ for all $w \in [0,1]$ , which is the order considered in Jaworski (Reference Jaworski2019) to quantify dependence of EV copulas.

We now introduce axioms of measures that quantify the degree of tail concordance.

Definition 2.5 (Axioms of tail concordance measures). A map $\kappa\;:\;\mathcal L \rightarrow \mathbb{R}$ is called a tail concordance measure (TCM) if it satisfies the following conditions.

  1. (1) (Normalization) $\kappa(\Lambda)=1$ if $\Lambda$ is tail comonotonic.

  2. (2) (Tail independence) $\kappa(\Lambda)=0$ if and only if $\Lambda$ is tail independent.

  3. (3) (Monotonicity) If $\Lambda\preceq \Lambda'$ for $\Lambda,\Lambda' \in \mathcal L$ , then $\kappa(\Lambda)\leq \kappa(\Lambda')$ .

  4. (4) (Continuity) If $\Lambda^{[n]}\to\Lambda$ ( $n\to\infty$ ) pointwise for $\Lambda^{[n]},\Lambda \in \mathcal L$ , $n\in\mathbb{N}$ , then $\lim_{n\rightarrow \infty}\kappa(\Lambda^{[n]})=\kappa(\Lambda)$ .

If, in addition, $\kappa(\Lambda)=1$ and $\Lambda=\overline \Lambda$ are equivalent, then $\kappa$ is called a strict TCM.

Axiom (3) is a fundamental requirement to quantify tail concordance, and Axioms (1) and (2) normalize the measure. By these three axioms, we have that $0\leq \kappa(\Lambda)\leq 1$ for every $\Lambda \in \mathcal L$ . Axiom (4) ensures that if $\kappa$ is calculated based on an approximated tail copula $\Lambda^{[n]}$ of $\Lambda$ , then the estimate $\kappa(\Lambda^{[n]})$ is close to $\kappa(\Lambda)$ . Finally, strictness of $\kappa$ can be naturally required to detect tail comonotonicity under which various asymptotic results are accessible. Let us now introduce properties of TCMs related to the evaluation of convex combinations of tail copulas.

Definition 2.6 (Convexity, concavity and linearity). A TCM $\kappa$ is called

  1. (1) convex if

    (2.5) \begin{align}\kappa(t\Lambda+(1-t)\Lambda')\leq t\kappa(\Lambda)+(1-t)\kappa(\Lambda')\quad\text{for every}\quad \Lambda,\Lambda' \in \mathcal L\quad\text{and}\quad t \in [0,1],\end{align}
  2. (2) concave if the reverse inequality in (2.5) holds, and

  3. (3) linear if $\kappa$ is convex and concave.

3. The proposed tail concordance measures

3.1 Definitions, basic properties and examples

By positive homogeneity (2.2) of tail copulas, it is sufficient to construct measures of tail concordance only from $\Lambda(u,v)$ with the restricted domain $(u,v) \in \{(r_\theta\cos\theta,r_\theta\sin\theta)\;:\;\theta \in (0,\pi/2)\}$ for some $r_\theta\;:\;(0,\pi/2)\rightarrow (0,\infty)$ . As discussed in Section 1, we take $r_\theta = 1/(\sin\theta \cos \theta)^{1/2}$ so that the rectangles appearing in (2.1) have the same volume as $[0,1]\times[0,1]$ for every $\theta \in (0,\pi/2)$ . Consequently, elements in the reference set

\begin{align*}\left\{\Lambda\left(b,\frac{1}{b}\right)\;:\;b \in (0,\infty)\right\}\end{align*}

are comparable with each other as limiting tail probabilities evaluated at the rectangles $[0,b]\times[0,1/b]$ for $b \in (0,\infty)$ . Based on this interpretation, we consider the following classes of measures.

Definition 3.1 (Maximal and $\mu$ -average tail concordance measures).

  1. (1) The maximal TCM (MTCM) $\lambda^\ast\;:\;\mathcal L \rightarrow \mathbb{R}_{+}$ is defined by

    (3.1) \begin{align}\lambda^\ast(\Lambda)=\sup_{b \in (0,\infty)}\Lambda(b,1/b).\end{align}
  2. (2) Let $\mathcal M$ be the set of all Borel probability measures on $(0,\infty)$ such that $\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)<\infty$ . For $\mu \in \mathcal M$ , the $\mu$ -average TCM (ATCM) $\lambda_\mu\;:\;\mathcal L \rightarrow \mathbb{R}_{+}$ is defined by

    (3.2) \begin{align}\lambda_\mu(\Lambda)=\frac{\int_{(0,\infty)} \Lambda(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}.\end{align}
    The measure $\mu$ is called the angular measure.

The MTCM is constructed based on the idea that the rectangle maximizing the limiting probability $\Lambda(b,1/b)$ captures the feature of tail dependence of C. On the other hand, the ATCM can be interpreted as a normalized average of the limiting tail probabilities weighted by $\mu \in \mathcal M$ . As we will see in Example 3.6, the angular measure $\mu \in \mathcal M$ can be chosen externally by an analyst depending on the importance of each rectangle $[0,b]\times[0,1/b]$ . Therefore, the two measures $\lambda^\ast$ and $\lambda_\mu$ can be used for different purposes since the main objective of $\lambda^\ast$ may be to extract the most distinctive feature of the tail behavior. Unlike the MTCM, the ATCM requires the denominator $\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)$ so that $\lambda_\mu$ satisfies Axiom (1) in Definition 2.5; see Proposition 3.7 below. Due to this denominator, it may be more reasonable to use the numerator in (3.2) rather than $\lambda_\mu$ when quantifying the degree of average tail dependence in comparison with $\lambda$ and $\lambda^\ast$ . Differently from the TDC, $\mu$ -ATCMs can capture non-exchangeable tail dependence as seen in the following representation.

Proposition 3.2 (Representation of $\mu$ -ATCMs). For $\mu \in \mathcal M$ , the $\mu$ -ATCM can be represented as

(3.3) \begin{align}\lambda_\mu(\Lambda)= \frac{w_0 \Lambda(1,1)+w_1 \int_{(0,1)}\Lambda(b,1/b)\;\textrm{d} \mu_1(b)+w_2\int_{(0,1)}\Lambda(1/b,b)\;\textrm{d}\mu_2(b)}{w_0 +w_1 \int_{(0,1)}b\;\textrm{d} \mu_1(b)+w_2\int_{(0,1)}b\;\textrm{d} \mu_2(b)},\end{align}

where $w_0,w_1,w_2\geq 0$ with $w_0+w_1+w_2=1$ and $\mu_1$ and $\mu_2$ are Borel probability measures on (0,1).

Representation (3.3) may be easier to interpret than (3.2) since the limiting non-exchangeable tail probabilities $\Lambda(b,1/b)$ and $\Lambda(1/b,b)$ are treated on the same scale on (0,1) where the weights for different bs are determined by $\mu_1$ and $\mu_2$ , respectively. The TDC corresponds to the case when $(w_0,w_1,w_2)=(1,0,0)$ , that is, the weight is concentrated on the main diagonal. By taking positive values for $w_1$ and $w_2$ , the $\mu$ -ATCM incorporates the limiting tail probabilities $\Lambda(b,1/b)$ and $\Lambda(1/b,b)$ , which are in general different for non-exchangeable copulas.

Remark 3.3 (Attainability of the MTCM). The supremum in (3.1) is attainable in $b \in (0,\infty)$ for any $\Lambda \in \mathcal L$ since $\lim_{b\downarrow 0}\Lambda\left(b,1/b\right)=\lim_{b\rightarrow \infty}\Lambda\left(b,1/b\right)=0$ and the map $b \mapsto \Lambda\left(b,1/b\right)$ is continuous and bounded; see Proposition A.1(7) and Proposition A.2(1). Therefore, one can write $\lambda^\ast(\Lambda)=\max_{b \in (0,\infty)}\Lambda(b,1/b)$ . Moreover, assuming that the maximum is uniquely attained at a single point, we write

\begin{align*}b^\ast=\mathop{\textrm{argmax}}\limits_{b \in (0,\infty)}\Lambda(b,1/b).\end{align*}

A deviation of $b^\ast$ from 1 may be an important sign of tail non-exchangeability under which the TDC may not be a suitable measure to summarize tail dependence; see Section 4.2 for experiments.

Remark 3.4 Independently of the present paper, Siburg et al. (Reference Siburg, Strothmann and Weiß2022) introduced tail dependence measures constructed as an average and maximum over the reference set $\{\Lambda(s,1-s)\;:\;s \in [0,1] \}$ .

As seen in the following examples, the angular measure $\mu$ of the $\mu$ -ATCM can be chosen for mathematical tractability or for practical purposes.

Example 3.5 (Examples of $\mu$ -ATCMs).

  1. (1) Generalized TDC: For $b \in (0,\infty)$ , let $\mu=\delta_b$ in (3.2) be the Dirac measure on b. Then the resulting $\mu$ -ATCM is given by

    \begin{align*} \lambda_{\delta_b}(\Lambda)=\frac{\Lambda(b,1/b)}{\overline \Lambda(b,1/b)}= \Lambda\left(1\vee b^2,1\vee\frac{1}{b^2}\right). \end{align*}
    We call this measure the generalized tail dependence coefficient (GTDC); note that $b=1$ leads to the TDC.
  2. (2) Uniform ATCM: Let $w_1=w_2=1/2$ , and $\mu_1=\mu_2$ in (3.3) be probability measures whose unit masses are uniformly put on (0,1). Then the corresponding $\mu$ -ATCM, denoted by $\lambda_{\text{U}}$ , is given by

    \begin{align*}\lambda_{\text{U}}(\Lambda)=\int_{(0,1)}\left\{\Lambda\left(b,\frac{1}{b}\right)+\Lambda\left(\frac{1}{b},b\right) \right\}\;\textrm{d} b.\end{align*}
    We call this measure the uniform ATCM.

Example 3.6 (A practical choice of $\mu$ in credit risk modeling). Let $X \sim F$ and $Y \sim G$ be continuously distributed random variables representing the values of two firms with default probability of the former being estimated as $0.05$ and that of the latter being estimated as an interval $[0.001, 0.01]$ with some levels of credibility. To model the dependence between X and Y, joint default events of the form

\begin{align*}\{X\leq q_{0.05}(X),\,Y \leq q_\alpha(Y)\}=\{U\leq 0.05,\,V \leq \alpha\},\quad \alpha \in [0.001,\, 0.01],\end{align*}

are of primary concern, where $q_\alpha(X)$ and $q_\alpha(Y)$ , $\alpha \in (0,1)$ , are the $\alpha$ -quantiles of F and G, and $(U,V)=(F(X),G(Y))$ . Therefore, to quantify the tail dependence of (X, Y), the values of the tail copulas

\begin{align*}\Lambda(b,1/b),\quad b \in \left[\left(\frac{0.001}{0.05}\right)^{1/2},\left(\frac{0.01}{0.05}\right)^{1/2}\right]=[0.141,0.447],\end{align*}

may be more important than $\Lambda(1,1)$ , where $b \in [0.141,0.447]$ is determined so that the ratio between $0.05$ and $\alpha \in [0.001,0.01]$ equals that of pb and $p/b$ . Therefore, compared with the TDC, the tail dependence of interest may be better summarized by a $\mu$ -ATCM with $\mu$ supported on $[0.141,0.447]$ , and with the weights possibly determined proportionally to the credibility of the estimated default probabilities.

The next proposition states that the MTCM and ATCMs are TCMs in the sense of Definition 2.5.

Proposition 3.7 (Axiomatic properties).

  1. (1) The MTCM $\lambda^\ast$ is a strict and convex TCM.

  2. (2) For $\mu \in \mathcal M$ , the $\mu$ -ATCM $\lambda_\mu$ is a linear TCM.

  3. (3) A $\mu$ -ATCM is strict if $\mu \in \mathcal M$ satisfies the following condition:

    (3.4) \begin{align} \mu((1-\epsilon,1+\epsilon)\cap(0,\infty))\gt 0\text{ for any } \epsilon \gt0. \end{align}

Proposition 3.7(1) and (2) state that the proposed measures satisfy the axiomatic properties of TCMs presented in Definition 2.5. According to Proposition 3.7(3), the uniform ATCM $\lambda_{\text{U}}$ in Example 3.5(2) and the TDC $\lambda$ are strict ATCMs. However, as seen in the following example, the GTDC in Example 3.5(1) is not always a strict TCM as the corresponding angular measure $\mu$ may violate Condition (3.4).

Example 3.8 (GTDCs of a singular copula). For $\theta \in (0,1)$ , let $C_\theta$ be a copula considered in Nelsen (Reference Nelsen2006, Section 3.2.1), where the probability mass $\theta \in (0,1)$ is uniformly distributed on the line segment from (0,0) to $(\theta,1)$ , and the probability mass $1-\theta$ is uniformly distributed on the line segment from $(\theta,1)$ to (1,0). The tail copula of $C_\theta$ is given by $\Lambda_\theta(u,v)=\Lambda(u,v;\;C_\theta)=\min(u,\theta v)$ , and thus the GTDC for $\mu=\delta_b$ is given by

\begin{align*} \lambda_{\delta_b}(\Lambda_\theta)= \begin{cases} 1, & \text{ if } b\leq\sqrt{\theta},\\[5pt] \theta/b^2 \in (\theta,1), & \text{ if } \sqrt{\theta}\lt b\lt 1, \\[5pt] \theta, & \text{ if } 1\leq b.\\[5pt] \end{cases} \end{align*}

Therefore, $\Lambda_\theta \neq \overline \Lambda$ but it holds that $\lambda_{\delta_{\sqrt{\theta}}}(\Lambda_\theta)=1$ .

3.2 Bounds of average tail concordance measures

We next study bounds of $\mu$ -ATCMs for a fixed $\Lambda \in \mathcal L$ over all angular measures $\mu \in \mathcal M$ . Namely, we are interested in the minimal and maximal average tail concordance measures defined by

\begin{align*}\underline \lambda(\Lambda)=\inf_{\mu\in \mathcal M}\lambda_\mu(\Lambda)\quad\text{and}\quad\overline \lambda(\Lambda)=\sup_{\mu\in \mathcal M}\lambda_\mu(\Lambda),\quad \Lambda \in \mathcal L,\end{align*}

and their attaining angular measures. Characterizations of these extremal ATCMs and their connections to the MTCM are provided in the following theorem.

Theorem 3.9 (Characterization of the minimal and maximal ATCMs). Let $\Lambda \in \mathcal L$ .

  1. (1) For every $\mu \in \mathcal M$ , it holds that

    (3.5) \begin{align}\lambda(\Lambda)\leq \lambda_{\mu}(\Lambda)\leq 1\wedge a\lambda(\Lambda)\quad\text{ where }\quad a=a(\mu)=\frac{\int_{(0,\infty)}\max(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)} \in [1,\infty].\end{align}
    Therefore, the angular measure $\delta_1$ attains $\underline \lambda(\Lambda)=\lambda(\Lambda)=\Lambda(1,1)$ .
  2. (2) It holds that

    (3.6) \begin{align}\overline \lambda(\Lambda)&=\sup_{b \in (0,\infty)}\frac{\Lambda\left(b,1/b\right)}{\overline \Lambda\left(b,1/b\right)}\qquad\qquad\qquad\;\;\; \;\;\;\;\;\;\;\;\;\;\;\;\;\; \end{align}
    (3.7) \begin{align} \qquad = \max\left(\lim_{b \downarrow 0}\Lambda\left(1,\frac{1}{b^2}\right),\ \lim_{b \rightarrow \infty}\Lambda\left(b^2,1\right)\right). \end{align}
    The supremum in (3.6) cannot be replaced by the maximum in general.
  3. (3) It holds that $\lambda(\Lambda)\leq \lambda^\ast(\Lambda)\leq \overline \lambda(\Lambda)$ .

Theorem 3.9(1) shows that the TDC is the minimal ATCM. By (3.5), the coefficient $a=a(\mu)$ quantifies the gap between $\lambda$ and $\lambda_\mu$ . For the GTDC in Example 3.5(1), we have that $a(\delta_b)=\max(b^2,1/b^2)$ . Therefore, $a(\delta_1)=1$ , and $a(\delta_b)$ tents to inifinity as $b \downarrow 0$ or $b \rightarrow \infty$ . Moreover, a may admit the value $\infty$ when, for example, $\mu$ corresponds to the uniform ATCM in Example 3.5(2).

Theorem 3.9(2) provides formulas for the maximal ATCM. By Formula (3.6), the maximal ATCM can be interpreted as finding a rectangle maximizing the limiting tail probability $\Lambda(b,1/b)$ normalized by $\overline \Lambda(b,1/b)$ . Despite this intuitive interpretation, the maximal ATCM is not an appealing measure of tail dependence as we will now explain. First and foremost, maximizing the ratio $\Lambda(b,1/b)/\overline \Lambda(b,1/b)$ does not extract informative features of the underlying tail dependence since $b\mapsto \Lambda(b,1/b)/\overline \Lambda(b,1/b)$ is decreasing on (0,1) and increasing on $(1,\infty)$ ; therefore, as seen in Formula (3.7), the maximal ATCM can be interpreted as being attained at the y-axis ( $b\downarrow 0$ ) or the x-axis ( $b \rightarrow \infty$ ) regardless of $\Lambda$ . In fact, the maximal ATCM is typically independent of the parameters of tail dependence of various parametric copulas. For example, the maximal ATCMs of the survival Gumbel and Clayton copulas are all 1 regardless of their parameters; see Section 3.3. In summary, although the maximal ATCM provides some insights on the choice of $\mu$ , it is not recommendable to use as a tail dependence measure.

Finally, Theorem 3.9(3) says that the MTCM $\lambda^\ast$ is also bounded by $\lambda$ and $\overline \lambda$ although the MTCM is not an ATCM.

In the next remark, we shall adopt the notation $\textrm{D}_j f(\boldsymbol{{x}})=\partial f(\boldsymbol{{x}})/\partial x_j$ for $\boldsymbol{{x}}=({x}_{1},\dots,{x}_{d})$ and $f\;:\;\mathbb{R}^d\rightarrow \mathbb{R}$ , provided the partial derivative exists.

Remark 3.10 (Attainability of the maximal ATCM). As seen in Propositions A.1(2) and A.2.(2), the maps $t \mapsto \Lambda(t,1)$ and $t\mapsto \Lambda(1,t)$ , $t \in \mathbb{R}_{+}$ , are increasing. Therefore, by Theorem 3.9(2), the maximal ATCM is attained at $\overline \mu=\delta_b \in \mathcal M$ for some $b \in (0,\infty)$ if and only if there exists $t_0>0$ such that $\textrm{D}_1\Lambda(t,1)=0$ for $t \geq t_0$ when $\overline \lambda(\Lambda)=\lim_{t\rightarrow \infty}\Lambda(t,1)$ , and $\textrm{D}_2\Lambda(1,t)=0$ for $t \geq t_0$ when $\overline \lambda(\Lambda)=\lim_{t\rightarrow \infty}\Lambda(1,t)$ . An example of such an attainable case can be found in Example 3.11.

3.3 Illustrative examples

In this section, we derive the proposed TCMs for various parametric copulas.

Example 3.11 (Survival Marshall--Olkin copula). Let us consider the Marshall–Olkin copula $C_{\alpha,\beta}$ defined by

\begin{align*}C_{\alpha,\beta}^{\text{MO}}(u,v)=\min\left(u^{1-\alpha}v, uv^{1-\beta}\right),\quad\alpha,\beta \in (0,1],\quad (u,v)\in [0,1].\end{align*}

By calculation, the tail copula of the survival Marshall–Olkin copula is given by

\begin{align*}\Lambda_{\alpha,\beta}(u,v)=\Lambda(u,v;\;\hat{C}_{\alpha,\beta})=u+v-\max(v+(1-\alpha)u,u+(1-\beta)v)=\min(\alpha u,\beta v).\end{align*}

Therefore, the TDC is given by $\lambda(\Lambda_{\alpha,\beta})=\Lambda_{\alpha,\beta}(1,1)=\min(\alpha,\beta)$ . Moreover, since the function $b\mapsto \Lambda\left(b,1/b\right)=\min\left(\alpha b, \beta/b\right)$ , $b \in (0,\infty)$ , is maximized at $b^\ast=\sqrt{\beta/\alpha}$ , we have that $\lambda^\ast(\Lambda_{\alpha,\beta})=\sqrt{\alpha\beta}$ . Finally, by (3.7), we have that $\overline \lambda(\Lambda_{\alpha,\beta})=\max(\alpha,\beta)$ , which is attainable at $\overline \mu=\delta_b$ for every $b \in \left(0,\sqrt{\beta/\alpha}\right]$ if $\alpha \geq \beta$ , and for every $b \in \left[\sqrt{\beta/\alpha},\infty\right)$ if $\alpha \leq \beta$ .

Example 3.12 (Archimedean copulas). Consider an Archimedean copula

\begin{align*}C_\varphi(u,v)= \varphi^{-1}( \min( \varphi(0), \varphi(u)+\varphi(v))),\quad (u,v)\in [0,1],\end{align*}

for an Archimedean generator $\varphi\;:\;[0,1] \rightarrow [0,\infty)$ which is a convex, strictly decreasing and continuous function with $\varphi(1)=0$ . It is shown in Jaworski (Reference Jaworski2004) that, if $\mathcal E_\varphi(0)=\lim_{x \downarrow 0}x \varphi'(x)/\varphi(x)=-\theta_0$ , $0 \lt \theta_0 \lt \infty$ , then

\begin{align*}\Lambda(u,v;\;C_\varphi)=uv (u^{\theta_0} + v^{\theta_0})^{-1/\theta_0}.\end{align*}

Therefore, we have that

\begin{align*}\Lambda\left(b,\frac{1}{b};\;C_\varphi\right)=(b^{-\theta_0}+b^{\theta_0})^{-1/\theta_0}, \quad b \in (0,\infty).\end{align*}

Since $\Lambda\left(b,1/b;\;C_\varphi\right)$ is maximized at $b^\ast=1$ , we have that $\lambda(\Lambda)=\lambda^\ast(\Lambda)=2^{-1/\theta_0}$ . In addition, by (3.7), we have that $\overline \lambda(\Lambda)=\lim_{b\downarrow 0}(1+b^{2\theta_0})^{-1/\theta_0}=1$ . Examples of such Archimedean copulas include a Clayton copula with the generator $\varphi_\theta(t)=(t^{-\theta}-1)/\theta$ , $\theta \in (0,\infty)$ , which satisfies $\mathcal E_{\varphi_\theta}(0)=-\theta$ ; see Figure 2 (i) for examples of the curve $b \mapsto \Lambda\left(b,1/b;\;C_{\varphi_\theta}\right)$ .

Figure 2. The tail copulas $b \mapsto \Lambda\left(b,1/b\right)$ and $b \mapsto \Lambda\left(1/b,b\right)$ for a (i) Clayton copula $C_\theta^{\text{Cl}}$ ; (ii) t copula $C_{\nu,\rho}^t$ with $\nu=5$ (Nikoloulopoulos et al. Reference Nikoloulopoulos, Joe and Li2009); (iii), (iv) survival asymmetric Gumbel copula $C_{\alpha,\beta,\theta}^{\textrm{Gu}}$ with $\alpha=0.75$ and $\beta=0.35$ ; and (v), (vi) survival asymmetric Galambos copula $C_{\alpha,\beta,\theta}^{\textrm{Ga}}$ with $\alpha=0.35$ and $\beta=0.75$ . The parameters of the copulas vary from (i) $\theta=0.075$ to $68.967$ ; (ii) $\rho=-0.99$ to 1; (iii), (iv) $\theta=1.00$ to $69.661$ ; and (v), (vi) $\theta=0.075$ to $68.967$ as colors vary from blue to green to yellow, and to red. For Clayton and t copulas, only $b \mapsto \Lambda\left(b,1/b\right)$ , $b \in [0,1]$ , is plotted since these copulas are exchangeable.

It is also shown in Jaworski (Reference Jaworski2004) that, if $\mathcal E_\varphi(1)=-\lim_{x \downarrow 0}x \varphi'(1-x)/\varphi(1-x)=\theta_1$ , $1\le\theta_1<\infty$ , then the survival Archimedean copula has the tail copula

\begin{align*}\Lambda(u,v;\; \hat{C}_\varphi)=u + v - (u^{\theta_1} + v^{\theta_1})^{1/\theta_1}.\end{align*}

Therefore, we have that

\begin{align*}\Lambda\left(b,\frac{1}{b};\; \hat{C}_\varphi\right)=b + \frac{1}{b} - \left(b^{\theta_1} + b ^{-\theta_1}\right)^{1/\theta_1}.\end{align*}

This function is also maximized at $b^\ast=1$ , and thus we have that $\lambda(\Lambda)=\lambda^\ast(\Lambda)=2-2^{1/\theta_1}$ . In addition, (3.7) yields $\overline \lambda(\Lambda)=1$ . Examples of such Archimedean copulas include a Gumbel copula with the generator $\varphi_\theta(t)=(-\log t)^{\theta}$ , $\theta \in [1,\infty)$ , which satisfies $\mathcal E_{\varphi_\theta}(1)=\theta$ .

Example 3.13 (Asymmetric Gumbel and Galambos copulas). The asymmetric Gumbel and Galambos copulas are EV copulas with the respective Pickands dependence functions given by

\begin{align*}A_{\alpha,\beta,\theta}^{\textrm{Gu}}(w)&=(1-\alpha)w + (1-\beta)(1-w) + \{(\alpha w)^\theta + (\beta (1-w))^\theta\}^{1/\theta},\quad 1\leq \theta \lt \infty,\ 0<\alpha,\beta\leq 1,\\[5pt] A_{\alpha,\beta,\theta}^{\textrm{Ga}}(w)&=1-\{(\alpha w)^{-\theta} + (\beta (1-w))^{-\theta}\}^{-1/\theta},\quad 0 \lt \theta \lt \infty,\ 0<\alpha,\beta\leq 1.\end{align*}

Therefore, by (2.4), their survival copulas have the tail copulas

\begin{align*}\Lambda_{\alpha,\beta,\theta}^{\text{Gu}}\left(b,\frac{1}{b}\right)&=(\alpha - \beta) b + \beta \frac{b^2+1}{b}-b\left\{\alpha^\theta + \beta^\theta b^{-2\theta}\right\}^{1/\theta},\\[5pt] \Lambda_{\alpha,\beta,\theta}^{\textrm{Ga}}\left(b,\frac{1}{b}\right)&=b \left\{\alpha^{-\theta} + \beta^{-\theta}b^{2\theta}\right\}^{-1/\theta},\end{align*}

where $b \in (0,\infty)$ ; see Figure 2 (iii), (iv), (v), (vi) for examples of the corresponding curves. A rather tedious calculation shows that both tail copulas are maximized at $b^\ast=\sqrt{\beta/\alpha}$ , and we obtain the formulas

\begin{align*}\lambda(\Lambda_{\alpha,\beta,\theta}^{\text{Gu}})&=\alpha + \beta -(\alpha^\theta + \beta^\theta)^{1/\theta},\quad\lambda(\Lambda_{\alpha,\beta,\theta}^{\text{Ga}})=(\alpha^{-\theta}+\beta^{-\theta})^{-1/\theta},\\[5pt] \lambda^\ast(\Lambda_{\alpha,\beta,\theta}^{\text{Gu}})&=\left(2-2^{1/\theta}\right)\sqrt{\alpha\beta},\quad\lambda^\ast(\Lambda_{\alpha,\beta,\theta}^{\text{Ga}})=2^{-1/\theta}\sqrt{\alpha\beta},\\[5pt] \overline \lambda(\Lambda_{\alpha,\beta,\theta}^{\text{Gu}})&=\overline \lambda(\Lambda_{\alpha,\beta,\theta}^{\text{Ga}})=\max(\alpha,\beta).\end{align*}

4. Numerical experiments

In this section, we conduct numerical experiments to show the performance of the proposed tail concordance measures for various copulas. The proposed measures are computed based on the empirical tail copula constructed from n (pseudo-)observations of the underlying copula. Namely, for a sequence $k=k(n)$ such that $k/n \rightarrow 0$ as $n \rightarrow \infty$ , an empirical tail copula is constructed by $\tilde \Lambda^{[n,k]}(u,v)=\tilde C^{[n]}(ku/n,kv/n)/(k/n)$ , $(u,v)\in \mathbb{R}_{+}^2$ , where $\tilde C^{[n]}$ is an empirical copula constructed from (pseudo-)observations. Estimators of the proposed measures are then constructed by replacing $\Lambda$ with the empirical counterpart $\tilde \Lambda^{[n,k]}$ . The readers are referred to Appendix C for detailed construction and results on statistical inference of the proposed measures.

4.1 Simulation study

We first conduct a simulation study to estimate the proposed measures for two parametric copulas; one is a survival Marshall–Olkin copula $\hat{C}_{\alpha,\beta}^{\text{MO}}$ as in Example 3.11 for $(\alpha,\beta)=(0.353,0.75)$ , and another is a skew t copula $C_{\nu,\delta_1,\delta_2,\gamma}^{\text{ST}}$ for $(\nu,\delta_1,\delta_2,\gamma)=(5,0.8,-0.8,0.95)$ as in Smith et al. (Reference Smith, Gan and Kohn2012). Figure 3 shows scatter plots of these copulas.

Figure 3. Scatter plots of the survival Marshall–Olkin copula $\hat{C}_{\alpha,\beta}^{\text{MO}}$ and the skew t copula $C_{\nu,\delta_1,\delta_2,\gamma}^{\text{ST}}$ where the parameters are given by $(\alpha,\beta)=(0.353,0.75)$ and $(\nu,\delta_1,\delta_2,\gamma)=(5,0.8,-0.8,0.95)$ . The sample size is $n=10^4$ . The red line indicates the estimated line $y=(1/b^\ast)^2 x$ such that $\Lambda(b^\ast,1/b^\ast)=\sup_{b \in (0,\infty)}\Lambda(b,1/b)$ .

We first simulate $n=10^6$ samples from $\hat{C}_{\alpha,\beta}^{\text{MO}}$ and $C_{\nu,\delta_1,\delta_2,\gamma}^{\text{ST}}$ , and then evaluate the corresponding empirical tail copulas at $(b,1/b)$ and $(1/b,b)$ for $b \in \left\{1/L,\dots,1\right\}$ , where $L=100$ . The threshold $k \in \mathbb{N}$ is chosen to be $k_{\text{SMO}}=0.015\,\times\,N = 15,000$ for the survival Marshall–Olkin copula and $k_{\text{ST}} = 0.005 \,\times\,N = 5000$ for the skew t copula. These values are determined by a graphical plateau–finding search where the estimates of the TDC are plotted against various values of k, and an optimal k is chosen from an interval on which the estimated TDCs are roughly constant; see Schmidt and Stadtmüller (Reference Schmidt and Stadtmüller2006) for details. Finally, based on the empirical tail copulas, we estimate the TDC $\lambda$ , the discrete uniform ATCM $\lambda_{\text{U}_L}$ , where the equal weights are put on $(b,1/b)$ and $(1/b,b)$ for $b \in \left\{1/L,\dots,1\right\}$ , and the MTCM $\lambda^\ast$ with the estimators provided in Section C. To reduce the computational cost, we maximize the empirical tail copulas only over $\{1/L,\dots,1,L/(L-1),\dots,L\}$ when estimating the MTCM. Note that the true tail copulas and TCMs are available for survival Marshall–Olkin copulas; see Example 3.11. As mentioned in Smith et al. (Reference Smith, Gan and Kohn2012), the analytical calculation of the TDC for skew t copulas may not be straightforward. In Figure 4 and Table 2, we report the estimates of the tail copulas and the TCMs with the 95% bootstrap confidence intervals (CIs) based on $B=100$ bootstrap replications. As in Remark 3.3, we also report the maximizer $b^\ast$ of the MTCM as a measure of tail non-exchangeability. To treat $b^\ast$ and $1/b^\ast$ on the same scale, we report

(4.1) \begin{align}\langle b^\ast \rangle =\begin{cases}b^\ast, & \text{ if } 0\lt b^\ast \leq 1,\\[5pt] 2-1/b^\ast \in [1,2), & \text{ if } 1\lt b^\ast,\\[5pt] \end{cases}\end{align}

instead of $b^\ast$ . As a result, the square attains the MTCM if $\langle b^\ast \rangle=1$ , and a more elongated rectangle attains the MTCM as $\langle b^\ast \rangle$ goes to 0 or 2.

Figure 4. Plots of the estimates of the tail copulas $b \mapsto \Lambda\left(b,1/b\right)$ and $b \mapsto \Lambda\left(1/b,b\right)$ for (i), (ii) a survival Marshall–Olkin copula (left two plots); and (iii), (iv) a skew t copula (right two plots) based on $n=10^6$ samples. The black solid lines indicate bootstrap means of the empirical tail copulas and the dashed lines are the 95% bootstrap confidence intervals based on $B=100$ bootstrap replications. The brown solid lines in (i) and (ii) are the true curves derived in Example 3.11. The colored horizontal lines represent the bootstrap estimates of the TCMs.

Table 2. Bootstrap estimates and 95% CIs of the TDC $(\lambda)$ , the discrete uniform ATCM ( $\lambda_{\text{U}_L}$ ), the MTCM ( $\lambda^\ast$ ) and its maximizer $\langle b^\ast \rangle$ in (4.1) of the survival Marshall–Olkin copula and the skew t copula with $B=100$ bootstrap replications.

From Figure 4 and Table 2, we observe that the bootstrap CIs for the tail copulas and the proposed TCMs are sufficiently narrow. In particular, the estimated curves of $b \rightarrow \Lambda(b,1/b)$ are sufficiently close to the true ones in Figure 4 (i) and (ii). As we can see, both the survival Marshall–Olkin and the skew t copula have non-exchangeable tail dependence. The two copulas, however, have different features of tail dependence since the tail copula in Figure 4 (ii) has a sharp kink around $b=0.7$ whereas the tail copula in Figure 4 (iii) constantly takes on large values for $0.6 \leq b \leq 1$ . Since the former feature is captured by the MTCM and the latter one by the ATCM, the gap between the TDC and the MTCM is large for the survival Marshall–Olkin copula and the ATCM of the skew t copula is larger than that of the survival Marshall–Olkin copula.

4.2 Real data analysis

To investigate financial interconnectedness between different countries in times of a stressed economy, we compare the proposed TCMs for the returns of the stock indices DJ, NASDAQ, FTSE, HSI, and NIKKEI from 1987-01-05 to 2015-12-30. We particularly focus on the relationship of the DJ to the other indices to compare the corresponding domestic and international relationships within and to the US market, respectively. To this end, a rolling window analysis is conducted on which, for each year from 1989 to 2013, the last and next 2 years of data are included in the window, resulting in 5 year windows with sample size $n\approx 250 \,\times\, 5 = 1250$ each. For each window, we filter the marginal return series by GARCH(1,1) models with skew t innovations. The residuals are then rank-transformed to obtain the pseudo–observations of the underlying copula. Based on the pseudo–observations, we conduct the same analysis as in Section 4.1, where $L=100$ and the threshold k is chosen to be $0.2$ times the sample size following Bormann and Schienle (Reference Bormann and Schienle2020, Section 5). The results are summarized in Figure 5.

Figure 5. Plots of the estimates of the proposed TCMs for filtered stock returns of (i), (v) (DJ, NASDAQ); (ii), (vi) (DJ, FTSE); (iii), (vii) (DJ, HSI); and (iv), (viii) (DJ, NIKKEI). The solid lines indicate bootstrap means and the dashed lines are the 90% bootstrap confidence intervals based on $B=100$ bootstrap replications.

In Figure 5 (i)–(iv), we observe that the overall level of tail dependence is high for the pairs (DJ, NASDAQ) and (DJ, FTSE) and is relatively low for the pairs (DJ, HSI) and (DJ, NIKKEI). For all the pairs, the gap between the TDC and the MTCM is not significant. For the cases (i) and (ii), an increasing trend of tail dependence can be observed since around the financial crisis of 2007–2009. Such a trend is barely observable for the cases (iii) and (iv). In Figure 5 (v)–(viii), the maximizer $\langle b^\ast\rangle$ of the MTCM fluctuates over time around 1 for all the cases, but some bumps are visible during financial crises, such as the collapse of the Japanese asset price bubble in 1992 as seen in Figure 5 (viii), the Asian and millennium crisis accumulating into the Dot-Com crisis in 1995–2003 as seen in Figure 5 (v), (vii) and (viii), and the subprime mortgage crisis in 2007–2009 as seen in Figure 5 (vi), (vii) and (viii). The comparably small fluctuation in Figure 5 (v) implies tail exchangeability between two US stock indices.

5. Conclusion

We proposed two novel tail dependence measures which we call the maximal tail concordance measure (MTCM) and the $\mu$ -average tail concordance measure (ATCM). Both measures are based on tail copulas and possess clear probabilistic interpretations. The MTCM evaluates the largest limiting tail probability over all comparable rectangles in the tail, and the ATCM is a normalized average of these limiting tail probabilities. With these interpretations, the MTCM is useful for extracting the most distinctive feature of tail dependence, and ATCMs can be applied when specific joint tail events are of particular importance from a practical point of view. We showed that the two measures satisfy axiomatic properties naturally required for quantifying tail dependence. In contrast to the TDC, both proposed measures also capture non-exchangeable tail dependence. The choice of the angular measure $\mu$ of the ATCM was addressed via practical examples. Bounds of $\mu$ -ATCMs were also explored. We showed that the minimal ATCM is the TDC, and that, unlike the MTCM, the maximal ATCM does not extract informative features of tail dependence. Furthermore, we provided analytical formulas for various parametric copulas and simulation studies to support the use of the proposed measures. Finally, a real data analysis revealed tail dependence and tail non-exchangeability of the return series of stock indices, particularly in periods of financial distress.

Further investigation is needed for statistical inference of the proposed measures and for the relationship between the MTCM and the tail indices proposed by Furman et al. (Reference Furman, Su and Zitikis2015) and Genest and Jaworski (Reference Genest and Jaworski2021). Moreover, multivariate extensions and compatibility problems of the proposed TCMs are also interesting avenues of future research; see Frahm (Reference Frahm2006), Schmid and Schmidt (Reference Schmid and Schmidt2007), Li (Reference Li2009) and Gijbels et al. (Reference Gijbels, Kika and Omelka2020) for the former problem and Embrechts et al. (Reference Embrechts, Hofert and Wang2016) and Hofert and Koike (Reference Hofert and Koike2019) for the latter.

Acknowledgments

We would like to thank insightful comments from the editor and two anonymous reviewers. We are also grateful to Ricardas Zitikis, Ruodu Wang and Shunichi Nomura for their valuable comments. Takaaki Koike was supported by Japan Society for the Promotion of Science (JSPS KAKENHI Grant Number JP21K13275). Shogo Kato acknowledges financial support from JSPS KAKENHI Grant Number JP20K03759. Marius Hofert would like to thank the financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC RGPIN-2020-04897 and RGPAS-2020-00093).

Conflicts of interest

The authors declare none.

Appendices

A. Basic properties of tail copulas

Tail copulas play an important role for quantifying extremal co-movements between random variables. In this section, we summarize basic properties of tail copulas. To this end, let $\mathcal L$ be the set of all tail copulas.

Proposition A.1 (Basic properties of tail copulas). Let $\Lambda\in \mathcal L$ .

  1. (1) (2-increasingness): $\Lambda$ is 2-increasing, that is, $\Lambda(u',v')-\Lambda(u',v)-\Lambda(u,v')+\Lambda(u,v)\geq 0$ for every $0\leq u\leq u' $ and $0\leq v\leq v'$ .

  2. (2) (Monotonicity): $\Lambda(u,v)\leq \Lambda(u',v')$ for every $0\leq u\leq u'$ and $0\leq v\leq v'$ . If $\Lambda\not \equiv 0$ , then $\Lambda(u,v)<\Lambda(u',v')$ for every $0\lt u \lt u'$ and $0\lt v \lt v'$ .

  3. (3) (Groundedness): $\Lambda$ is grounded, that is, $\Lambda(u,v)=0$ if $u=0$ or $v=0$ .

  4. (4) (Positive homogeneity): $\Lambda(tu,tv)=t\Lambda(u,v)$ for every $t \geq 0$ and $(u,v)\in\mathbb{R}_{+}^2$ .

  5. (5) (Degeneracy): $\Lambda(u,v)= 0$ for all $(u,v)\in \mathbb{R}_{+}^2$ if and only if $\Lambda(u_0,v_0)=0$ for some $u_0,v_0>0$ .

  6. (6) (Coherence): If $C\preceq C'$ for $C,C' \in \mathcal C_2^{\text{L}}$ , then $\Lambda(u,v;\;C)\leq \Lambda(u,v;\;C')$ for all $(u,v)\in \mathbb{R}_{+}^2$ .

  7. (7) (Bounds): $0\leq \Lambda(u,v)\leq \min(u,v)$ for all $(u,v)\in\mathbb{R}_{+}^2$ and the bounds are attainable.

  8. (8) (Max-min inequalities): $(s\wedge t)\Lambda(u,v)\leq \Lambda(su,tv)\leq (s\vee t)\Lambda(u,v)$ for every $s,t\geq 0$ and $(u,v)\in \mathbb{R}_{+}^2$ .

Proof. (1), (3), (4) and (5) can be found in Joe et al. (Reference Joe, Li and Nikoloulopoulos2010, Propositions 2.1 and 2.2). (2) is shown in Schmidt and Stadtmüller (Reference Schmidt and Stadtmüller2006, Theorems 1 and 2). (6) follows directly from the definition of $\Lambda$ . (7) is implied by (6). (8) follows from (2) and (4).

Proposition A.2 (Continuity and derivatives of tail copulas). Let $\Lambda\in \mathcal L$ .

  1. (1) (Continuity): $|\Lambda(u,v)-\Lambda(u',v')|\leq |u-u'|+|v-v'|$ for every $(u,v),(u',v') \in \mathbb{R}_{+}^2$ , and thus $\Lambda$ is Lipschitz continuous.

  2. (2) (Partial derivatives): The partial derivatives $\textrm{D}_1\Lambda(u,v)$ and $\textrm{D}_2\Lambda(u,v)$ exist almost everywhere on $(u,v)\in\mathbb{R}_{+}^2$ . Moreover, $0\leq \textrm{D}_1\Lambda(u,v),\ \textrm{D}_2\Lambda(u,v)\leq 1$ and the functions

    \begin{align*} v\mapsto \textrm{D}_1\Lambda(u,v)\quad \text{and}\quad u\mapsto \textrm{D}_2\Lambda(u,v) \end{align*}
    are increasing almost everywhere on $\mathbb{R}_{+}$ .
  3. (3) (Euler’s theorem): $\Lambda(u,v)=u\textrm{D}_1\Lambda(u,v)+v \textrm{D}_2 \Lambda(u,v)$ for every $(u,v)\in\mathbb{R}_{+}^2$ .

Proof. (1) and (2) are shown in Schmidt and Stadtmüller (Reference Schmidt and Stadtmüller2006, Theorems 1 and 3), respectively. (3) is the well-known Euler’s homogeneous function theorem.

B. Proofs

B.1 Proof of Proposition 2.2

  1. (1) Let us write a point $(u,v)\in (0,\infty)^2$ in polar coordinates via $(u,v)=r(\cos \theta, \sin \theta)$ for $r \gt 0$ and $\theta \in (0,\pi/2)$ . By positive homogeneity of $\Lambda$ , we have that

    \begin{align*}\Lambda(u,v)=\frac{r}{r_\theta}\Lambda\left(r_\theta \cos(\theta),r_\theta \sin(\theta)\right),\end{align*}
    and thus $\Lambda \preceq \Lambda'$ is equivalent to (2.3).
  2. (2) Notice that $\Lambda(u,1)=\lim_{p\downarrow 0}\mathbb{P}(U\leq pu\,|\, V \leq p)$ and $\Lambda(1,v)=\lim_{p\downarrow 0}\mathbb{P}(V\leq pv\,|\, U \leq p)$ for $u,v\in (0,1]$ . Therefore, the desired equivalence holds from Part (1) of this proposition by taking $r_\theta=1/\max(\cos\theta,\sin\theta)$ .

B.2 Proof of Proposition 3.2

Representation (3.3) is obtained by taking $w_0=\mu(\{1\})$ , $w_1=\mu((0,1))$ , $w_2 = \mu((1,\infty))$ and $\mu_1(A) = \mu (A\cap (0,1))/w_1$ and $\mu_2(A) = \mu (\{1/b;\;b \in A\}\cap (0,1))/w_2$ , $A \in \mathfrak B ((0,\infty))$ , if $w_1>0$ and $w_2>0$ , respectively.

B.3 Proof of Proposition 3.7

(1) The first three axioms and convexity are straightforward to check and thus it remains to show the continuity axiom and the strictness. Suppose that $\Lambda^{[n]} \in \mathcal L$ , $n=1,2,\dots,$ converge to $\Lambda \in \mathcal L$ pointwise as $n\rightarrow \infty$ . Then, the convergence is uniform by Proposition A.2(1), Therefore, we have that

\begin{align*}\lim_{n\rightarrow \infty}\lambda^\ast(\Lambda^{[n]})=\lim_{n\rightarrow \infty}\max_{b \in (0,\infty)}\Lambda^{[n]}\left(b,\frac{1}{b}\right)=\max_{b \in (0,\infty)}\Lambda\left(b,\frac{1}{b}\right)=\lambda^\ast(\Lambda),\end{align*}

where the supremum in $\lambda^\ast$ can be replaced by the maximum as mentioned in Remark 3.3. To show the strictness of $\lambda^\ast$ , we first show the following corollary.

Corollary B.1 (Tail independence and tail comonotonicity for the TDC). A tail copula $\Lambda \in \mathcal L$ is tail independent if and only if $\lambda(\Lambda)=0$ , and $\Lambda$ is tail comonotonic if and only if $\lambda(\Lambda)=1$ .

Proof. The equivalence in the tail independent case follows directly from Proposition A.1(5). If $\Lambda$ is tail comonotonic, then $\lambda(\Lambda)=\lambda(\overline \Lambda)=1$ . To show the converse, suppose by way of contradiction that $\lambda(\Lambda)=1$ but that there exists $(u_0,v_0)\in \mathbb{R}_{+}^2$ such that $\Lambda(u_0,v_0)\neq \overline \Lambda(u_0,v_0)$ . Note that $u_0,v_0>0$ , otherwise $\Lambda(u_0,v_0)= \overline \Lambda(u_0,v_0)=0$ . By (3.5), we have that

\begin{align*}1=\lambda(\Lambda)\leq \lambda_{\delta_{\sqrt{u_0/v_0}}}(\Lambda)=\frac{\Lambda(u_0,v_0)}{\overline \Lambda(u_0,v_0)}\lt 1,\end{align*}

which is a contradiction.

By Corollary B.1, it suffices to show that $\lambda^\ast(\Lambda)=1$ implies $\lambda(\Lambda)=1$ . Suppose $\lambda^\ast(\Lambda)=1$ . As mentioned in Remark 3.3, there exists $b^\ast \in (0,\infty)$ such that $\lambda^\ast(\Lambda)=\Lambda\left(b^\ast,1/b^\ast\right)$ . Suppose that $0\lt b_\ast\lt 1$ . Then, by Proposition A.1(7), we have that

\begin{align*}1=\Lambda\left(b^\ast,\frac{1}{b^\ast}\right)\leq \overline \Lambda\left(b^\ast,\frac{1}{b^\ast}\right)=b_\ast\end{align*}

and thus that $1\leq b_\ast$ , which is a contradiction. Similarly, if we assume that $1\lt b_\ast$ , then we have that $1=\Lambda\left(b_\ast,1/b_\ast\right)\leq M\left(b_\ast,1/b_\ast\right)=1/b_\ast$ and thus that $b_\ast\leq 1$ , which is again a contradiction. Therefore, we have that $b_\ast=1$ , which yields $\lambda(\Lambda)=\Lambda(1,1)=\Lambda\left(b_\ast,1/b_\ast\right)=\lambda^\ast(\Lambda)=1$ .

  1. (2) Linearity and Axioms (3) and (4) immediately follow by definition of $\lambda_\mu$ . Axioms (1) and (2) are straightforward to show by (3.5) and Corollary B.1.

  2. (3) By Corollary B.1, it suffices to show that $\lambda_\mu(\Lambda)=1$ implies $\lambda(\Lambda)=1$ . Suppose, by way of contradiction, that $\lambda=\lambda(\Lambda)\leq 1- \delta\lt 1$ for some $\delta>0$ . By Condition (3.4), at least one of the following two cases holds: $\mu((1-\epsilon,1])>0$ for any $\epsilon>0$ or $\mu([1,1+\epsilon))>0$ for any $\epsilon>0$ . Assume that the former case is fulfilled; the latter case can be shown similarly. Let

    \begin{align*}c(\delta)=\frac{1-\delta}{1-\delta/2}\in (0,1)\quad\text{and}\quad R_{\delta}=\left[\sqrt{c(\delta)},1\right].\end{align*}

Then $1/b \leq b/c(\delta)$ for $b \in R_\delta$ . Together with $\Lambda(1,1)=\lambda(\Lambda)\leq 1-\delta$ , we have that, for $b \in R_\delta$ ,

\begin{align*}\Lambda\left(b,\frac{1}{b}\right)&\leq \Lambda\left(\frac{1}{b},\frac{1}{b}\right)=\frac{1}{b}\Lambda(1,1)\leq \frac{1}{c(\delta)}b(1-\delta)=\left(1-\frac{\delta}{2}\right)b=\left(1-\frac{\delta}{2}\right)\overline \Lambda\left(b,\frac{1}{b}\right).\end{align*}

Since $\Lambda(b,1/b)\leq \overline \Lambda(b,1/b)$ for $b \in (0,\infty)\backslash R_\delta$ , we have that

\begin{align*}\lambda_\mu(\Lambda)&=\frac{\int_{(0,\infty)}\Lambda(b,1/b) \;\textrm{d} \mu(b)}{\int_{(0,\infty)} \overline \Lambda(b,1/b) \;\textrm{d} \mu(b)}\leq \frac{\int_{(0,\infty)} \overline \Lambda(b,1/b) \;\textrm{d} \mu(b)-\frac{\delta}{2}\int_{R_\delta}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)} \overline \Lambda(b,1/b) \;\textrm{d} \mu(b)}\\[5pt] &=1-\frac{\delta}{2}\frac{\int_{R_\delta}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)} \overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}.\end{align*}

Moreover, we have that

\begin{align*}\int_{R_\delta}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)=\int_{R_\delta}b\;\textrm{d} \mu(b)\geq \sqrt{c(\delta)}\mu(R_\delta)>0,\end{align*}

and hence $\lambda_\mu(\Lambda)\lt 1$ , which contradicts the assumption that $\lambda_\mu(\Lambda)=1$ .

B.4 Proof of Theorem 3.9

  1. (1) Inequalities (3.5) directly follow from Proposition A.1(8).

  2. (2) To show Equation (3.6), the inequality $\overline \lambda(\Lambda)\leq \sup_{b \in (0,\infty)}\Lambda\left(b,1/b\right)/\overline \Lambda\left(b,1/b\right)$ follows since

    \begin{align*}\int_{(0,\infty)}\Lambda(b,1/b)\;\textrm{d} \mu(b) & = \int_{(0,\infty)}\overline \Lambda(b,1/b)\,\frac{\Lambda(b,1/b)}{\overline \Lambda(b,1/b)}\;\textrm{d} \mu(b) \\[5pt] & \leq \sup_{b \in (0,\infty)}\frac{\Lambda\left(b,1/b\right)}{\overline \Lambda\left(b,1/b\right)}\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b).\end{align*}
    Now let $\Lambda^\star(b)=\Lambda(b,1/b)/\overline \Lambda(b,1/b)$ . By Propositions A.1(2) and A.2(1), the map $b \mapsto \Lambda^\star(b)$ is continuous, decreasing on (0,1] and increasing on $[1,\infty)$ almost everywhere. Therefore, for any $\epsilon>0$ , there exists $b^\star \in (0,\infty)$ such that $\sup_{(0,\infty)}\Lambda^\star(b)-\epsilon \lt \Lambda^\star(b^\star)$ . Since $\Lambda^\star(b^\star)=\lambda_{\delta_{b^\star}}(\Lambda)$ for $\delta_{b^\star} \in \mathcal M$ , we obtain Equation (3.6). Equality (3.7) immediately follows from the monotonicity property of $b \mapsto \Lambda^\star(b)$ . Since $\delta_{0}$ and $\delta_{\infty}$ are not in $\mathcal M$ , the supremum in (3.6) is not attainable in general.
  3. (3) The inequality $\lambda(\Lambda)\leq\lambda^\ast(\Lambda)$ follows since $\lambda(\Lambda)=\Lambda(1,1)\leq \sup_{b \in (0,\infty)}\Lambda\left(b,1/b\right)=\lambda^\ast(\Lambda)$ . As mentioned in Remark 3.3, there exists $b^\ast \in (0,\infty)$ such that $\lambda^\ast(\Lambda)=\Lambda(b^\ast,1/b^\ast)$ . Since $\overline \Lambda(b^\ast,1/b^\ast)\leq 1$ , we have, by (3.6), that

    \begin{align*}\lambda^\ast(\Lambda)=\Lambda\left(b^\ast,\frac{1}{b^\ast}\right)\leq\frac{\Lambda(b^\ast,1/b^\ast)}{\overline \Lambda(b^\ast,1/b^\ast)}\leq \overline \lambda(\Lambda),\end{align*}
    which completes the proof.

C. Estimation of the proposed measures

In this section, we construct nonparametric estimatiors of the proposed TCMs based on the asymptotic results of empirical tail copulas developed in Schmidt and Stadtmüller (Reference Schmidt and Stadtmüller2006) and Bücher and Dette (Reference Bücher and Dette2013). To this end, let $(X_i,Y_i)$ , $i=1,\dots,n$ , $n \in \mathbb{N}$ , be an i.i.d. sample from a joint distribution function H with continuous marginal distributions $X\sim F$ and $Y \sim G$ , and copula $C \in \mathcal C_2^{\text{L}}$ . If F and G are known, then $(U_i,V_i)=(F(X_i),G(Y_i))$ , $i=1,\dots,n$ , is an i.i.d. sample from C. If F and G are unknown, then

\begin{align*}(\hat{U}_i,\hat{V}_i)=(\hat{F}^{[n]}(X_i),\hat{G}^{[n]}(Y_i))\quad \text{where}\quad \hat{F}^{[n]}(x)=\frac{1}{n+1}\sum_{i=1}^n \textbf{1}_{\{X_i \leq x\}},\ \hat{G}^{[n]}(x)=\frac{1}{n+1}\sum_{i=1}^n \textbf{1}_{\{Y_i \leq x\}},\end{align*}

are the pseudo–observations from C. Denote by

\begin{align*}\tilde C^{[n]}(u,v)=\frac{1}{n}\sum_{i=1}^n \textbf{1}_{\{U_i\leq u,V_i\leq v\}}\quad \text{and}\quad\hat{C}^{[n]}(u,v)=\frac{1}{n}\sum_{i=1}^n \textbf{1}_{\{\hat{U}_i\leq u,\hat{V}_i\leq v\}}\end{align*}

the empirical copulas based on the samples $(U_i,V_i)$ and $(\hat{U}_i,\hat{V}_i)$ , respectively. Define the empirical tail copulas

\begin{align*}\tilde \Lambda^{[n,k]}(u,v)=\frac{n}{k}\tilde C^{[n]}\left(\frac{ku}{n},\frac{kv}{n}\right)\quad\text{and}\quad\hat{\Lambda}^{[n,k]}(u,v)=\frac{n}{k}\hat{C}^{[n]}\left(\frac{ku}{n},\frac{kv}{n}\right),\end{align*}

where $k=k(n)$ is such that $k(n) \rightarrow \infty$ and $k=\operatorname{o}(n)$ as $n \rightarrow \infty$ .

For $n,k \in \mathbb{N}$ and $L>1$ , define the estimators of $\lambda^\ast$ by

(C1) \begin{align}{\tilde \lambda}^{\ast[n,k,L]}=\max_{b\in[1/L,L]}\tilde \Lambda^{[n,k]}\left(b,\frac{1}{b}\right)\quad\text{and}\quad{\hat{\lambda}}^{\ast[n,k,L]}=\max_{b\in[1/L,L]}\hat{\Lambda}^{[n,k]}\left(b,\frac{1}{b}\right)\end{align}

and the estimators of $\lambda_\mu$ , $\mu \in \mathcal M$ , by

(C2) \begin{align}\tilde \lambda_{\mu}^{[n,k]} &=\frac{\int_{(0,\infty)}\tilde \Lambda^{[n,k]}(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)} =\frac{1}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}\,\frac{1}{k}\sum_{i=1}^n \mu\left(\left[\frac{nU_i}{k},\frac{k}{n V_i}\right]\right), \end{align}
(C3) \begin{align} \hat{\lambda}_{\mu}^{[n,k]} &=\frac{\int_{(0,\infty)}\hat{\Lambda}^{[n,k]}(b,1/b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}=\frac{1}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}\,\frac{1}{k}\sum_{i=1}^n \mu\left(\left[\frac{n{\hat{U}}_i}{k},\frac{k}{n {\hat{V}}_i}\right]\right).\end{align}

Since $\tilde \Lambda^{[n,k]}$ and $\hat{\Lambda}^{[n,k]}$ are step functions, the estimators in (C1) can be computed by maximizing $\tilde \Lambda^{[n,k]}$ and $\hat{\Lambda}^{[n,k]}$ over a finite number of points in $[1/L,L]^2$ . The estimators in (C2) and (C3) can be computed under the assumptions that $\mu([s,t])$ , $0<s\le t <\infty$ , and the denominator $\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)$ can be calculated analytically.

Asymptotic results for empirical tail copulas are derived under the following assumptions:

  1. (1) $\Lambda(\!\cdot\!)=\Lambda(\!\cdot;\;C)\not \equiv 0$ ;

  2. (2) there exists a function $A\;:\;\mathbb{R}_{+}\rightarrow \mathbb{R}_{+}$ such that $\lim_{t\rightarrow \infty}A(t)=0$ and that $|\Lambda(u,v)-tC(u/t,v/t)|=\operatorname{O}(A(t))$ , $t\to\infty$ , locally uniformly for $(u,v) \in \mathbb{R}_{+}^2$ ;

  3. (3) there exists a sequence $k=k(n) \in \mathbb{N}$ such that $k\rightarrow \infty$ , $k=\operatorname{o}(n)$ and $\sqrt{k}A\left(n/k\right)\rightarrow 0$ ; and

  4. (4) the partial derivative $\textrm{D}_j\Lambda$ exists and is continuous on $\{(x_1,x_2)\in\mathbb{R}_{+}^2:0<x_j<\infty\}$ for $j=1,2$ ;

see Bücher and Dette (Reference Bücher and Dette2013) and Bormann and Schienle (Reference Bormann and Schienle2020) for more details. Under these assumptions, asymptotic results for the estimators in (C1), (C2) and (C3) can be derived as follows.

Theorem C.1 (Asymptotic normality for the MTCM). Suppose that the map $b \mapsto \Lambda(b,1/b)$ admits a unique maximum attained at $b^\ast \in [1/L,L]$ for some $L>1$ . If Assumptions (1), (2) and (3) hold, then

\begin{align*}\sqrt{k}\left({\tilde \lambda}^{\ast[n,k,L]}-\lambda^\ast(\Lambda)\right)\stackrel{d}{\longrightarrow}\operatorname{N}(0,\tilde \tau_{\Lambda}(b^\ast)),\quad \tilde \tau_{\Lambda}(b^\ast)=\Lambda\left(b^\ast,\frac{1}{b^\ast}\right).\end{align*}

If, in addition, Assumption (4) is satisfied, then

\begin{align*}\sqrt{k}\left({\hat{\lambda}}^{\ast[n,k,L]}-\lambda^\ast(\Lambda)\right)\stackrel{d}{\longrightarrow}\operatorname{N}(0,\hat{\tau}_{\Lambda}(b^\ast)),\quad \hat{\tau}_{\Lambda}(b^\ast)=\operatorname{Var}\left(\hat{\mathbb G}_\Lambda\left(b^\ast,\frac{1}{b^\ast}\right)\right),\end{align*}

where the process $\hat {\mathbb G}_\Lambda$ is defined by

(C4) \begin{align}\hat{\mathbb G}_\Lambda(u,v)=\tilde{\mathbb G}_\Lambda(u,v)-\textrm{D}_1 \Lambda(u,v)\tilde{\mathbb G}_\Lambda(u,\infty)-\textrm{D}_2 \Lambda(u,v)\tilde{\mathbb G}_\Lambda(\infty,v),\end{align}

with $\textrm{D}_j\Lambda(u,v)$ , $j=1,2$ , being defined as 0 if $u=0$ or $v=0$ , and with $\tilde {\mathbb G}_\Lambda$ being a centered tight continuous Gaussian random field with the covariance structure given by $\mathbb{E}[\tilde{\mathbb G}_\Lambda(u,v)\tilde{\mathbb G}_\Lambda(u',v')]=\Lambda(u\wedge u',v\wedge v')$ .

Theorem C.2 (Asymptotic normality for $\mu$ -ATCMs). Suppose that the support of $\mu \in \mathcal M$ is contained in $[1/L,L]$ for some $L>1$ . If Assumptions (1), (2) and (3) hold, then

\begin{align*}\sqrt{k}\left(\tilde \lambda_{\mu}^{[n,k]}-\lambda_\mu(\Lambda)\right)\stackrel{d}{\longrightarrow}\operatorname{N}(0,\tilde \sigma_{\mu}^2(\Lambda)),\end{align*}

where

\begin{align*}\tilde \sigma_{\mu}^2(\Lambda)=\frac{\int_{(0,\infty)}\!\int_{(0,\infty)} \Lambda(\min(b,b'),\min(1/b,1/b'))\;\textrm{d} \mu(b)\!\;\textrm{d} \mu(b')}{\left(\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)\right)^2}.\end{align*}

If, in addition, Assumption (4) is satisfied, then

\begin{align*}\sqrt{k}\left(\hat{\lambda}_{\mu}^{[n,k]}-\lambda_\mu(\Lambda)\right)\stackrel{d}{\longrightarrow}\operatorname{N}(0,\hat{\sigma}_{\mu}^2(\Lambda)),\end{align*}

where

\begin{align*}\hat{\sigma}_{\mu}^2(\Lambda)=\frac{\int_{(0,\infty)}\!\int_{(0,\infty)} \mathbb{E}[\hat {\mathbb G}_{\Lambda}(b,1/b)\hat {\mathbb G}_{\Lambda}(b',1/b')]\;\textrm{d} \mu(b)\!\;\textrm{d} \mu(b')}{\left(\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)\right)^2},\end{align*}

where $\hat {\mathbb G}$ is as defined in (C4).

Remark C.3. In Theorems C.1 and C.2, the estimators (C1), (C2) and (C3) are constructed based on the restricted part of the tail copula $\left\{\Lambda\left(b,1/b\right)\;:\; b \in \left[1/L,L\right]\right\}$ . This restriction simplifies the technical discussion in the proof of the above theorems, and more advanced analysis is left for future research.

Proofs of Theorems C.1 and C.2

Let $\mathcal B_\infty(\bar{\mathbb{R}}_{+}^2)$ denote the space of all $\mathbb{R}$ -valued functions on $\bar{\mathbb{R}}_{+}^2$ which are locally uniformly bounded on every compact subset of $[0,\infty]^2\backslash\{(0,0)\}$ . The set $\mathcal B_\infty(\bar{\mathbb{R}}_{+}^2)$ is a complete metric space with the metric

\begin{align*}d(f,g)=\sum_{l=1}^\infty \frac{1\wedge ||f-g||_{T_l}}{2^l},\quad f,\,g \in \mathcal B_\infty(\bar{\mathbb{R}}_{+}^2),\end{align*}

where $T_l=[0,l]^2\cup[0,l]\times \{\infty\}\cup \{\infty\}\cup[0,l]$ and $||f||_{T_l}=\sup_{x \in T_l}|f(x)|$ ; see Van der Vaart and Wellner (Reference Van der Vaart and Wellner1996, Chapter 1.6). Note that a sequence in $\mathcal B_\infty(\bar{\mathbb{R}}_{+}^2)$ converges with respect to this metric if and only if it converges uniformly on every $T_l$ . Let $\rightsquigarrow$ denote weak convergence in the sense of Hoffmann–Jørgensen; see the aforementioned reference for details. Then, the following asymptotic results hold for empirical tail copulas; see Bücher and Dette (Reference Bücher and Dette2013, Lemma 2.1 and Theorem 2.2).

Proposition C.4. Suppose that Assumptions (1), (2) and (3) hold. Then, as $n\rightarrow \infty$ , we have that

(C5) \begin{align}\sqrt{k}\left(\tilde \Lambda^{[n,k]}(u,v)-\Lambda(u,v)\right)\rightsquigarrow\tilde {\mathbb G}_{\Lambda}(u,v),\end{align}

in $\mathcal B_\infty(\bar{\mathbb{R}}_{+}^2)$ , where $\tilde {\mathbb G}_\Lambda$ is a centered tight continuous Gaussian random field with covariance structure $\mathbb{E}[\tilde{\mathbb G}_\Lambda(u,v)\tilde{\mathbb G}_\Lambda(u',v')]=\Lambda(u\wedge u',v\wedge v')$ .

Proposition C.5. Suppose that Assumptions (1), (2), (3) and (4) hold. Then, as $n\rightarrow \infty$ , we have that

(C6) \begin{align}\sqrt{k}\left(\hat{\Lambda}^{[n,k]}(u,v)-\Lambda(u,v)\right)\rightsquigarrow\hat {\mathbb G}_{\Lambda}(u,v),\end{align}

in $\mathcal B_\infty(\bar{\mathbb{R}}_{+}^2)$ , where $\hat {\mathbb G}_\Lambda$ is a centered tight continuous Gaussian random field represented by

\begin{align*}\hat{\mathbb G}_\Lambda(u,v)=\tilde{\mathbb G}_\Lambda(u,v)-\textrm{D}_1 \Lambda(u,v)\tilde{\mathbb G}_\Lambda(u,\infty)-\textrm{D}_2 \Lambda(u,v)\tilde{\mathbb G}_\Lambda(\infty,v),\end{align*}

and $\textrm{D}_j\Lambda(u,v)$ , $j=1,2$ , is defined as 0 if $u=0$ or $v=0$ .

By Van der Vaart and Wellner (Reference Van der Vaart and Wellner1996, Theorem 1.6.1), the above weak convergence results hold in the set of uniformly bounded functions $l^\infty(T_L)$ on $T_L=[0,L]^2\cup[0,L]\times \{\infty\}\cup \{\infty\}\times [0,L]$ . Therefore, (C5) and (C6) hold in $l^\infty([1/L,L])$ with $(u,v) \in [1/L,L]^2$ replaced by $(b,1/b)$ , $b \in [1/L,L]$ , and the domain of all the appearing functions is regarded as $[1/L,L]$ ; this statement is a consequence of the continuous mapping theorem (Van der Vaart and Wellner Reference Van der Vaart and Wellner1996, Theorem 1.3.6) by taking $g\;:\;l^\infty(T_L)\rightarrow l^\infty([1/L,L])$ as $g(f)=f(b,1/b)$ , $b \in [1/L,L]$ .

Now Theorem C.1 is derived directly from Propositions C.4 and C.5 and the extended Delta Method of Cárcamo et al. (Reference Cárcamo, Cuevas and Rodríguez2020, Theorem 2.2) under the assumption that the unique maximizer $b^\ast$ of $b \rightarrow \Lambda(b,1/b)$ is in $[1/L,L]$ . Namely, for ${\tilde \lambda}^{\ast[n,k,L]}$ , we have that

\begin{align*}\sqrt{k}\left({\tilde \lambda}^{\ast[n,k,L]}-\lambda^\ast(\Lambda)\right)&=\sqrt{k}\left( \max_{b \in [1/L,L]}{\tilde \Lambda}^{[n,k]}\left(b,\frac{1}{b}\right)- \max_{b \in [1/L,L]}{\Lambda}\left(b,\frac{1}{b}\right)\right)\\[5pt] &\stackrel{d}{\longrightarrow}\sup\left\{\tilde{\mathbb G}_\Lambda\left(b,\frac{1}{b}\right)\;:\; b \in \left[\frac{1}{L},L\right]\text{ such that }\Lambda\left(b,\frac{1}{b}\right)=\Lambda\left(b^\ast,\frac{1}{b^\ast}\right)\right\}\\[5pt] & =\tilde{\mathbb G}_\Lambda\left(b^\ast,\frac{1}{b^\ast}\right),\end{align*}

where the limit is obtained by Cárcamo et al. (Reference Cárcamo, Cuevas and Rodríguez2020, Corollary 2.3). The case of ${\hat{\lambda}}^{\ast[n,k,L]}$ is shown analogously.

Next, the weak convergence results in Theorem C.2 hold directly by Propositions C.4 and C.5 and the continuous mapping theorem. Namely, since the map $\phi^{[L]}\;:\; l^\infty([1/L,L])\rightarrow \mathbb{R}$ defined by

\begin{align*}\phi^{[L]}(f)&=\frac{\int_{(0,\infty)}f(b)\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}\end{align*}

is linear, we have, for ${\tilde \lambda}_\mu^{[n,k]}$ , that

\begin{align*}\sqrt{k}\left({\tilde \lambda}_{\mu}^{[n,k]}-\lambda_\mu(\Lambda)\right)&=\sqrt{k}\left({\tilde \lambda}_{\mu}^{[n,k]}-\lambda_\mu(\Lambda)\right)\\[5pt] &=\frac{1}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}\int_{(0,\infty)}\sqrt{k}\left({\tilde \Lambda}^{[n,k]}\left(b,\frac{1}{b}\right)- \Lambda\left(b,\frac{1}{b}\right)\right)\;\textrm{d} \mu(b)\\[5pt] & \stackrel{d}{\longrightarrow}\frac{1}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}\int_{(0,\infty)}\tilde{\mathbb G}_\Lambda\left(b,\frac{1}{b}\right)\;\textrm{d} \mu(b).\end{align*}

By Van der Vaart and Wellner (Reference Van der Vaart and Wellner1996, Lemma 3.9.8), the limit is normally distributed with mean

\begin{align*} \frac{\int_{(0,\infty)}\mathbb{E}\left[\tilde{\mathbb G}_\Lambda\left(b,\frac{1}{b}\right)\right]\;\textrm{d} \mu(b)}{\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)}= 0\end{align*}

and variance

\begin{align*}&\frac{\int_{(0,\infty)}\int_{(0,\infty)}\mathbb{E}\left[\tilde{\mathbb G}_\Lambda\left(b,\frac{1}{b}\right)\tilde{\mathbb G}_\Lambda\left(b',\frac{1}{b'}\right)\right]\;\textrm{d} \mu(b)\;\textrm{d} \mu(b')}{ \left(\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)\right)^2} \\[5pt] & = \frac{\int_{(0,\infty)}\int_{(0,\infty)}\Lambda\left(\min(b,b'),\min\left(\frac{1}{b},\frac{1}{b'}\right)\right)\;\textrm{d} \mu(b)\;\textrm{d} \mu(b')}{ \left(\int_{(0,\infty)}\overline \Lambda(b,1/b)\;\textrm{d} \mu(b)\right)^2}.\end{align*}

The case of ${\hat{\lambda}}_\mu^{[n,k]}$ is shown analogously.

References

Aloui, R., Aïssa, M.S.B. and Nguyen, D.K. (2011) Global financial crisis, extreme interdependences, and contagion effects: The role of economic structure? Journal of Banking & Finance, 35(1), 130141.CrossRefGoogle Scholar
Bormann, C. and Schienle, M. (2020) Detecting structural differences in tail dependence of financial time series. Journal of Business & Economic Statistics, 38(2), 380392.CrossRefGoogle Scholar
Bücher, A. and Dette, H. (2013) Multiplier bootstrap of tail copulas with applications. Bernoulli, 19(5A), 16551687.CrossRefGoogle Scholar
Cárcamo, J., Cuevas, A. and Rodríguez, L.-A. (2020) Directional differentiability for supremum-type functionals: Statistical applications. Bernoulli, 26(3), 21432175.CrossRefGoogle Scholar
Cheung, K.C., Ling, H.K., Tang, Q., Yam, S.C.P. and Yuen, F.L. (2019) On additivity of tail comonotonic risks. Scandinavian Actuarial Journal, 2019(10), 837866.CrossRefGoogle Scholar
Donnelly, C. and Embrechts, P. (2010) The devil is in the tails: Actuarial mathematics and the subprime mortgage crisis. Astin Bulletin, 40(1), 133.CrossRefGoogle Scholar
Embrechts, P. (2009). Linear correlation and evt: Properties and caveats. Journal of Financial Econometrics, 7(1), 3039.CrossRefGoogle Scholar
Embrechts, P., Hofert, M. and Wang, R. (2016) Bernoulli and tail-dependence compatibility. The Annals of Applied Probability, 26(3), 16361658.CrossRefGoogle Scholar
Frahm, G. (2006) On the extremal dependence coefficient of multivariate distributions. Statistics & Probability Letters, 76(14), 14701481.CrossRefGoogle Scholar
Furman, E., Su, J. and Zitikis, R. (2015) Paths and indices of maximal tail dependence. ASTIN Bulletin, 45(3), 661678.CrossRefGoogle Scholar
Garcia, R. and Tsafack, G. (2011) Dependence structure and extreme comovements in international equity and bond markets. Journal of Banking & Finance, 35(8), 19541970.CrossRefGoogle Scholar
Genest, C. and Jaworski, P. (2021) On the class of bivariate archimax copulas under constraints. Fuzzy Sets and Systems, 415, 3753.CrossRefGoogle Scholar
Gijbels, I., Kika, V. and Omelka, M. (2020) Multivariate tail coefficients: Properties and estimation. Entropy, 22(7), 728.CrossRefGoogle ScholarPubMed
Hofert, M. and Koike, T. (2019) Compatibility and attainability of matrices of correlation-based measures of concordance. ASTIN Bulletin: The Journal of the IAA, 49(3), 885918.CrossRefGoogle Scholar
Hua, L. and Joe, H. (2011) Tail order and intermediate tail dependence of multivariate copulas. Journal of Multivariate Analysis, 102(10), 14541471.CrossRefGoogle Scholar
Hua, L. and Joe, H. (2012a) Tail comonotonicity and conservative risk measures. ASTIN Bulletin: The Journal of the IAA, 42(2), 601629.Google Scholar
Hua, L. and Joe, H. (2012b) Tail comonotonicity: Properties, constructions, and asymptotic additivity of risk measures. Insurance: Mathematics and Economics, 51(2), 492503.Google Scholar
Hua, L., Polansky, A. and Pramanik, P. (2019) Assessing bivariate tail non-exchangeable dependence. Statistics & Probability Letters, 155, 108556.CrossRefGoogle Scholar
Jaworski, P. (2004) On uniform tail expansions of bivariate copulas. Applicationes Mathematicae, 4(31), 397415.CrossRefGoogle Scholar
Jaworski, P. (2006) On uniform tail expansions of multivariate copulas and wide convergence of measures. Applicationes Mathematicae, 33, 159184.CrossRefGoogle Scholar
Jaworski, P. (2010) Tail behaviour of copulas. In Copula Theory and its Applications, pp. 161–186. Springer.CrossRefGoogle Scholar
Jaworski, P. (2019) On extreme value copulas with given concordance measures. In International Summer School on Aggregation Operators, pp. 29–46. Springer.CrossRefGoogle Scholar
Joe, H., Li, H. and Nikoloulopoulos, A.K. (2010) Tail dependence functions and vine copulas. Journal of Multivariate Analysis, 101(1), 252270.CrossRefGoogle Scholar
Klüppelberg, C., Kuhn, G. and Peng, L. (2007) Estimating the tail dependence function of an elliptical distribution. Bernoulli, 13(1), 229251.CrossRefGoogle Scholar
Ledford, A.W. and Tawn, J.A. (1996) Statistics for near independence in multivariate extreme values. Biometrika, 83(1), 169187.CrossRefGoogle Scholar
Ledford, A.W. and Tawn, J.A. (1997) Modelling dependence within joint tail regions. Journal of the Royal Statistical Society: Series B (Statistical Methodology), 59(2), 475499.CrossRefGoogle Scholar
Li, H. (2009) Orthant tail dependence of multivariate extreme value distributions. Journal of Multivariate Analysis, 100(1), 243256.CrossRefGoogle Scholar
Li, H. (2013) Dependence comparison of multivariate extremes via stochastic tail orders. In Stochastic Orders in Reliability and Risk, pp. 363–387. Springer.CrossRefGoogle Scholar
Nelsen, R.B. (2006) An Introduction to Copulas. New York: Springer.Google Scholar
Nikoloulopoulos, A.K., Joe, H. and Li, H. (2009) Extreme value properties of multivariate t copulas. Extremes, 12(2), 129148.CrossRefGoogle Scholar
Ramos, A. and Ledford, A. (2009) A new class of models for bivariate joint tails. Journal of the Royal Statistical Society: Series B (Statistical Methodology), 71(1), 219241.CrossRefGoogle Scholar
Scarsini, M. (1984) On measures of concordance. Stochastica, 8(3), 201218.Google Scholar
Schmid, F. and Schmidt, R. (2007) Multivariate conditional versions of spearman’s rho and related measures of tail dependence. Journal of Multivariate Analysis, 98(6), 11231140.CrossRefGoogle Scholar
Schmidt, R. and Stadtmüller, U. (2006) Non-parametric estimation of tail dependence. Scandinavian Journal of Statistics, 33(2), 307335.CrossRefGoogle Scholar
Siburg, K.F. and Strothmann, C. (2022) Multivariate tail dependence and local stochastic dominance. arXiv:2210.06842.Google Scholar
Siburg, K.F., Strothmann, C. and Weiß, G. (2022) Comparing and quantifying tail dependence. arXiv:2208.10319.CrossRefGoogle Scholar
Sibuya, M. (1960) Bivariate extreme statistics, i. Annals of the Institute of Statistical Mathematics, 11(3), 195210.CrossRefGoogle Scholar
Smith, M.S., Gan, Q. and Kohn, R.J. (2012) Modelling dependence using skew t copulas: Bayesian inference and applications. Journal of Applied Econometrics, 27(3), 500522.CrossRefGoogle Scholar
Sun, N., Yang, C. and Zitikis, R. (2020) A statistical methodology for assessing the maximal strength of tail dependence. ASTIN Bulletin: The Journal of the IAA, 50(3), 799825.CrossRefGoogle Scholar
Sun, N., Yang, C. and Zitikis, R. (2022) Tail maximal dependence in bivariate models: Estimation and applications. arXiv:2207.13248.CrossRefGoogle Scholar
Van der Vaart, A.W. and Wellner, J.A. (1996) Weak Convergence and Empirical Processes: With Applications to Statistics. New York: Springer.CrossRefGoogle Scholar
Figure 0

Figure 1. Scatter plot of the survival Marshall–Olkin copula $\hat{C}_{\alpha,\beta}^{\text{MO}}$ for $(\alpha,\beta)=(0.353,0.75)$ and its tail concordance measures. The lower TDC $\lambda$ evaluates the limiting tail probability at the square colored in red. The $\mu$-ATCM $\lambda_\mu$ is a normalized average of $\Lambda$ over all comparable rectangles (green) weighted by the measure $\mu$. Finally, the MTCM $\lambda^\ast$ is the maximum of limiting tail probabilities over all comparable rectangles, which is attained for the rectangle highlighted in blue.

Figure 1

Table 1. Analytical forms and examples for specific numerical values of the TDC and the proposed tail dependence measures; see Section 3.3 for details.

Figure 2

Figure 2. The tail copulas $b \mapsto \Lambda\left(b,1/b\right)$ and $b \mapsto \Lambda\left(1/b,b\right)$ for a (i) Clayton copula $C_\theta^{\text{Cl}}$; (ii) t copula $C_{\nu,\rho}^t$ with $\nu=5$ (Nikoloulopoulos et al. 2009); (iii), (iv) survival asymmetric Gumbel copula $C_{\alpha,\beta,\theta}^{\textrm{Gu}}$ with $\alpha=0.75$ and $\beta=0.35$; and (v), (vi) survival asymmetric Galambos copula $C_{\alpha,\beta,\theta}^{\textrm{Ga}}$ with $\alpha=0.35$ and $\beta=0.75$. The parameters of the copulas vary from (i) $\theta=0.075$ to $68.967$; (ii) $\rho=-0.99$ to 1; (iii), (iv) $\theta=1.00$ to $69.661$; and (v), (vi) $\theta=0.075$ to $68.967$ as colors vary from blue to green to yellow, and to red. For Clayton and t copulas, only $b \mapsto \Lambda\left(b,1/b\right)$, $b \in [0,1]$, is plotted since these copulas are exchangeable.

Figure 3

Figure 3. Scatter plots of the survival Marshall–Olkin copula $\hat{C}_{\alpha,\beta}^{\text{MO}}$ and the skew t copula $C_{\nu,\delta_1,\delta_2,\gamma}^{\text{ST}}$ where the parameters are given by $(\alpha,\beta)=(0.353,0.75)$ and $(\nu,\delta_1,\delta_2,\gamma)=(5,0.8,-0.8,0.95)$. The sample size is $n=10^4$. The red line indicates the estimated line $y=(1/b^\ast)^2 x$ such that $\Lambda(b^\ast,1/b^\ast)=\sup_{b \in (0,\infty)}\Lambda(b,1/b)$.

Figure 4

Figure 4. Plots of the estimates of the tail copulas $b \mapsto \Lambda\left(b,1/b\right)$ and $b \mapsto \Lambda\left(1/b,b\right)$ for (i), (ii) a survival Marshall–Olkin copula (left two plots); and (iii), (iv) a skew t copula (right two plots) based on $n=10^6$ samples. The black solid lines indicate bootstrap means of the empirical tail copulas and the dashed lines are the 95% bootstrap confidence intervals based on $B=100$ bootstrap replications. The brown solid lines in (i) and (ii) are the true curves derived in Example 3.11. The colored horizontal lines represent the bootstrap estimates of the TCMs.

Figure 5

Table 2. Bootstrap estimates and 95% CIs of the TDC $(\lambda)$, the discrete uniform ATCM ($\lambda_{\text{U}_L}$), the MTCM ($\lambda^\ast$) and its maximizer $\langle b^\ast \rangle$ in (4.1) of the survival Marshall–Olkin copula and the skew t copula with $B=100$ bootstrap replications.

Figure 6

Figure 5. Plots of the estimates of the proposed TCMs for filtered stock returns of (i), (v) (DJ, NASDAQ); (ii), (vi) (DJ, FTSE); (iii), (vii) (DJ, HSI); and (iv), (viii) (DJ, NIKKEI). The solid lines indicate bootstrap means and the dashed lines are the 90% bootstrap confidence intervals based on $B=100$ bootstrap replications.