Hostname: page-component-84b7d79bbc-rnpqb Total loading time: 0 Render date: 2024-07-30T14:14:10.489Z Has data issue: false hasContentIssue false
  • English
  • Français

Analysis of tiles produced from a schist material and their ultraviolet, near-infrared, mid-infrared, longwave-infrared and far-infrared spectra

Published online by Cambridge University Press:  16 March 2022

Hulya Kuru Mutlu Open the ORCID record for Hulya Kuru Mutlu [Opens in a new window]  and
Atakan Mutlu
Hulya Kuru Mutlu*
Affiliation:
Eskisehir Osmangazi University, Vocational School of Health Services, Opticianry Program, 26040, Eskisehir, Turkey
Atakan Mutlu
Affiliation:
Hatipoglu Gunes Tile and Brick Industry, Inc., 43030, Kutahya, Turkey
*
*E-mail: hkuru@ogu.edu.tr
Get access Rights & Permissions [Opens in a new window]

Abstract

Clays are used in the general production of earthen tiles. In this study, the production and characterization of earthen tiles from schist, a clayey rock formed by metamorphism of mudstone or shale, was investigated. The impact of tiles on atmospheric temperature through their absorption of the visible, near-infrared and far-infrared wavelength regions is evaluated. In particular, the absorption of ultraviolet and infrared radiation by the tiles was evaluated, as this could have beneficial applications for human health and the environment. UV-A radiation (320–400 nm) is not absorbed by the atmosphere, but schist materials absorb UV-A, which can contribute to melanoma formation (i.e. cancer). Field-emission scanning electron microscopy, X-ray fluorescence spectrometry and X-ray diffraction were used for the analysis of the schist materials. The tile-production stages of schist materials (drying, firing, water absorption rate, etc.) were tested at Hatipoglu Gunes Tile and Brick Industry, Inc. (Turkey). The tiles fired at 950°C and 1000°C comply with the industry standard compressive strength values for fired tiles (when converted to industry production conditions) and were 156.15 and 123.20 kg cm–2, respectively.

Keywords

FESEMindustrial applicationschistsolar absorption
Type
Article
Information
Clay Minerals , Volume 56 , Issue 4 , December 2021 , pp. 292 - 298
Copyright
Copyright © The Author(s), 2022. Published by Cambridge University Press on behalf of The Mineralogical Society of Great Britain and Ireland

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Associate Editor: João Labrincha

References

Afouxenidis, D., Stefanaki, E.C., Polymeris, G.S., Sakalis, A., Tsirliganis, N.C. & Kitis, G. (2007) TL/OSL properties of natural schist for archaeological dating and retrospective dosimetry. Nuclear Instruments & Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 580, 705–709.CrossRefGoogle Scholar
ASTM C 136 (2019) Standard Test Method for Sieve Analysis of Fine and Course Aggregates. ASTM International, West Conshohocken, PA, 5 pp.Google Scholar
ASTM C1492 (2003) Standard Specification for Concrete Roof Tile. ASTM International, West Conshohocken, PA, 7 pp.Google Scholar
ASTM C830-00 (2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure. ASTM International, West Conshohocken, PA, 3 pp.Google Scholar
Bacıoglu, A. & Bacıoglu, S. (2013) Tugla ve Kiremit Uretim, Yatırım, İsletme. Yaman Offset, Ankara, Turkey, 216 pp.Google Scholar
Barnes, P.W., Williamson, C.E., Lucas, R.M., Robinson, S.A., Madronich, S., Paul, N.D. et al. (2019) Ozone depletion, ultraviolet radiation, climate change and prospects for a sustainable future. Nature Sustainability, 2, 569–579.CrossRefGoogle Scholar
Bayazit, M., Adsan, M. & Genc, E. (2020) Application of spectroscopic, microscopic and thermal techniques in archaeometric investigation of painted pottery from Kuriki (Turkey). Ceramics International, 46, 3695–3707.CrossRefGoogle Scholar
Berdahl, P. & Bretz, S.E. (1997) Preliminary survey of the solar reflectance of cool roofing materials. Energy and Buildings, 25, 149–158.CrossRefGoogle Scholar
Bressiani, J.C., Genova, L.A. & Bressiani, A.H.A. (2013) The effect of additives on the microstructure and translucency of alumina. Presented at 96th Annual Meeting of the American Ceramics Society, Indianapolis, IN, USA, 24–27 April.Google Scholar
Bretz, S.E. & Akbari, H. (1997) Long-term performance of high-albedo roof coatings. Energy and Buildings, 25, 159–167.CrossRefGoogle Scholar
Bureau of Indian Standards (2002) Clay Roofing tiles, Mangalore Pattern Specification. Bureau of Indian Standards, New Delhi, 14 pp.Google Scholar
Cabrera, M.J., Montins, V., Solsona, D. & Sala, J.M. (2012) Obtención de efectos físico-ópticos para la decoración de baldosas cerámicas. Boletin de la Sociedad Espanola de Ceramica y Vidrio, 51, IX–XVI.CrossRefGoogle Scholar
Çağatay, A. & Arda, O. (1979) The mineralogical studies of schistose rocks occurring in the Bitlis–Yukarı Ölek Köyü–Süllap Bere area with a view about their origin. Journal of Geological Engineering, 3, 55–58.Google Scholar
Cement, Glass, Ceramics and Soil Products Exporters' Association (2018) Ceramics Industry: Macro Market Research. Cement, Glass, Ceramics and Soil Products Exporters' Association, Ankara.Google Scholar
de Oliveira Piccolo, P., Zaccaron, A., Teixeira, L.B., de Moraes, E.G., Montedo, O.R.K., de Oliveira, A.P.N. (2022) Development of translucent ceramic tiles from modified porcelain stoneware tile paste. Journal of Building Engineering, 45, 103543.CrossRefGoogle Scholar
De Silva, G.H.M.J.S. & Mallwattha, M.P.D.P. (2018) Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge. Construction and Building Materials, 179, 390–399.CrossRefGoogle Scholar
Di Gennaro, R., Dondi, M., Cappelletti, P., Cerri, G., de' Gennaro, M., Guarini, G. et al. (2007) Zeolite-felspar epiclasdtic rocks as flux in ceramic tile manufacturing. Microporous and Mesoporous Materials, 105, 273–278.CrossRefGoogle Scholar
Doel, T.J.A. & Bowen, P. (1996) Tensile properties of particulate-reinforced metal matrix composites. Composites Part A: Applied Science and Manufacturing, 27, 655–665.CrossRefGoogle Scholar
Dondi, M. (1999) Clay materials for ceramic tiles from the Sassuolo District (Northern Apennines, Italy). Geology, composition and technological properties. Applied Clay Science, 15, 337–366.CrossRefGoogle Scholar
Guimarães, T.C.D.F., dos Santos, A.V., da Cruz Thedoldi, A.& de Lima, D.C. (2021) Study of the physical and mechanical properties with the chemical composition of red clays from the State of Bahia. Matéria, 26, DOI: 10.1590/S1517-707620210004.1310.Google Scholar
Heinz, A. & Haszler, A. (2000) Recent developments in aluminum alloys for aerospace applications Material Science and Engineering A, 280, 102–107.CrossRefGoogle Scholar
John, V.B. (1992) Introduction to Engineering Materials. Macmillan Press Ltd, London, 656 pp.CrossRefGoogle Scholar
Jordán, M.M., Meseguer, S., Pardo, F. & Montero, M.A. (2020) High-temperature mineral formation after firing clay materials associated with mined coal in Teruel (Spain). Applied Sciences, 10, 3114.CrossRefGoogle Scholar
Korkanç, M., Sener, T., Doğan, B. & Baskara, T. (2017) Geology and building material potential of the Gümüsler-Aktas (Niğde) Region. Omer Halisdemir University Journal of Engineering Science, 6, 132–139.Google Scholar
Korkmaz, A.V. & Hacıfazlıoğlu, H. (2019) An alternative raw material to clay stone in cement production: meta schist. Scientific Mining Journal, 58, 95–110.Google Scholar
Ministry of Development T.C. (2015) 10th Development Plan 2014–2018. Ministry of Development T.C., Ankara, 212 pp.Google Scholar
Mousavi, S.Z.S., Tavakoli, H., Moarefvand, P. & Rezaei, M. (2020) Micro-structural, petro-graphical and mechanical studies of schist rocks under the freezing–thawing cycles. Cold Regions Science and Technology, 174, 103039.CrossRefGoogle Scholar
Prado, R.T.A. & Ferreira, F.L. (2005) Measurement of albedo and analysis of its influence the surface temperature of building roof materials. Energy and Buildings, 37, 295–300.CrossRefGoogle Scholar
Rajamannan, B., Sundaram, C.K., Viruthagiri, G. & Shanmugam, N. (2007) Effects of fly ash addition on the mechanical and other properties of ceramic tiles. International Journal of Latest Research in Science and Technology, 2, 486–491.Google Scholar
Sa, A.B., Pereira, S., Soares, N., Pinto, J., Lanzinha, J.C. & Paiva, A. (2016) An approach on the thermal behaviour assessment of tabique walls coated with schist tiles: Experimental analysis. Energy and Buildings, 117, 11–19.CrossRefGoogle Scholar
Sadik, C., El Amrani, I.E. & Albizane, A. (2013) Effect of andalusite rich schist grain size and the addition of metallic aluminum powder on the properties of silica–alumina refractory. Journal of Asian Ceramic Societies, 1, 351–355.CrossRefGoogle Scholar
Sakina, B., Imane, M., Abdelkader, B. & Abdelghani, B. (2021) Novel hybrid materials based on montmorillonite-modified reinforced p-phenylenediamine: synthesis, characterization and their optical, electrochemical and thermal properties. Journal of Molecular Structure, 1243, 130866.Google Scholar
Saroglou, H., Marinos, P. & Tsiambaos, G. (2004) Applicability of the Hoek–Brown failure criterion and the effect of the anisotropy on intact rock samples from Athens schist. Journal of the South African Institute of Mining and Metallurgy, 104, 209–215.Google Scholar
Setlow, R.B., Grist, E., Thompson, K. & Woodhead, A.D. (1993) Wavelengths effective in induction of malignant-melanoma. Proceedings of the National Academy of Sciences of the United States of America, 90, 6666–6670.CrossRefGoogle ScholarPubMed
Sultana, M.S., Ahmed, A.N., Zaman, M.N., Rahman, M.A., Biswas, P.K. & Nandy, P.K. (2015) Utilization of hard rock dust with red clay to produce roof tiles. Journal of Asian Ceramic Societies, 3, 22–26.CrossRefGoogle Scholar
Topolář, L., Kocáb, D., Šlanhof, J., Schmid, P., Daněk, P. & Nováček, J. (2020) Testing the influence of the material bonding system on the bond strength of large-format tiles installed on concrete substrate under mechanical loading. Materials, 13, 3200.CrossRefGoogle ScholarPubMed
Torres, P., Manjate, R.S., Quaresma, S., Fernandes, H.R. & Ferreira, J.M.F. (2007) Development of ceramic floor tile compositions based on quartzite and granite sludges. Journal of the European Ceramic Society, 27, 4649–4655.CrossRefGoogle Scholar
TS EN 1304 (2016) Turkısh Standard 2016, clay roofing tiles and fittings – product definitions and specifications. Retrieved from https://intweb.tse.org.tr/Standard/Standard/Standard.aspx?081118051115108051104119110104055047105102120088111043113104073101112105071054115114066067076053#:~:text=Standard%20Detay%C4%B1&text=Kapsam%20%3A,sahip%20olmas%C4%B1%20gerekli%20%C3%B6zelliklerini%20kapsarGoogle Scholar
TS EN ISO 10545-4 (2019) Turkey Standard Test Methods for Determination of Modulus of Rupture and Breaking Strength. Turkish Standards Institution, Ankara, 5 pp.Google Scholar
Wood, S.R., Berwick, M., Ley, R.D., Walter, R.B., Setlow, R.B. & Timmins, G.S. (2006) UV causation of melanoma in Xiphophorus is dominated by melanin photosensitized oxidant production. Proceedings of the National Academy of Sciences of the United States of America, 103, 4111–4115.CrossRefGoogle ScholarPubMed
Yagiz, S. (2011) Properties of schist extracted in the city of Denizli surroundings as construction material. Pamukkale University Journal of Engineering Sciences, 17, 157–163.Google Scholar