Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-27T21:51:17.490Z Has data issue: false hasContentIssue false

Thermally expanded vermiculite as a risk-free and general-purpose sorbent for hazardous chemical spillages

Published online by Cambridge University Press:  22 July 2019

Nguyen Duc Cuong
Affiliation:
Department of Bionano Engineering, Hanyang University, Ansan 426-791, Republic of Korea
Vu Thi Hue
Affiliation:
Graduate School of Applied Chemistry, Hanyang University, Ansan 426-791, Republic of Korea
Yong Shin Kim*
Affiliation:
Graduate School of Applied Chemistry, Hanyang University, Ansan 426-791, Republic of Korea Department of Chemical and Molecular Engineering, Hanyang University, Ansan 426-791, Republic of Korea

Abstract

Expanded vermiculite with excellent thermal and chemical stability was investigated as a reliable sorbent for hazardous liquid spillages, including those leading to fire and explosion risks. Many expanded samples were prepared by rapid heating using both different temperatures and dissimilar vermiculite dimensions. Their capabilities for hazard clean-up were correlated with the structural characteristics of expanded vermiculite with slit-shaped porosity. When using optimized vermiculite, the moderate sorption capacities of 1.5–3.0 g g−1 were obtained for various hazardous chemicals, including hydrophilic/hydrophobic organic chemicals and strongly acidic/basic solutions. The sorption capacities depended more strongly on physical properties, such as the pore volume of the sorbent and the density of the absorbed liquid, rather than the vermiculite's chemical composition. The void space interconnected by interparticle/intraparticle pores worked as imbibing pathways due to their capillarity, resulting in the rapid, spontaneous sorption of hazardous chemicals. The hazardous chemicals may be removed from a testing vessel via sorption with an efficiency of >94 wt.% for 10 min. These results demonstrate that the expanded vermiculite may be a potential candidate as a reliable general-purpose sorbent for hazardous materials clean-up under harsh conditions.

Type
Article
Copyright
Copyright © Mineralogical Society of Great Britain and Ireland 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Associate Editor: Lawrence Warr

References

Bao, C., Bi, S., Zhang, H., Zhao, J., Wang, P., Yue, C.Y. & Yang, J. (2016) Graphene oxide beads for fast clean-up of hazardous chemicals. Journal of Materials Chemistry A, 4, 94379446.Google Scholar
Bastani, D., Safekordi, A.A., Alihosseini, A. & Taghikhani, V. (2006) Study of oil sorption by expanded perlite at 298.15K. Separation & Purification Technology, 52, 295300.Google Scholar
Bandura, L., Franus, M., Józefaciuk, G. & Franus, W. (2015) Synthetic zeolites from fly ash as effective mineral sorbents for land-based petroleum spills cleanup. Fuel, 147, 100107.Google Scholar
Bandura, L., Panek, R., Rotko, M. & Franus, W. (2016) Synthetic zeolites from fly ash for an effective trapping of BTX in gas stream. Microporous and Mesoporous Materials, 223, 19.Google Scholar
Bandura, L., Woszuk, A., Kolodynska, D. & Fronus, W. (2017) Application of mineral sorbents for removal of petroleum substances: a review. Minerals, 7, 3761.Google Scholar
Bourliva, A., Sikalidis, A.K., Papadoulou, L., Betsiou, M., Michailis, K., Sikalidis, C., & Filippidis, A. (2018) Removal of Cu2+ and Ni2+ ions from aqueous solutions by adsorption onto natural palygorskite and vermiculite. Clay Minerals, 53, 115.Google Scholar
Bi, H., Xie, X., Yin, K., Zhou, Y., Wan, S., He, L., Xu, F., Banhart, F., Sun, L. & Ruoff, R.S. (2012) Spongy graphene as a highly efficient and recyclable sorbent for oils and organic solvents. Advanced Functional Materials, 22, 44214425.Google Scholar
Chabot, V., Higgins, D., Yu, A., Xiao, X., Chen, Z. & Zhang, J. (2014) A review of graphene and graphene oxide sponge: material synthesis and applications to energy and the environment. Energy & Environmental Science, 7, 15641596.Google Scholar
Dang-Vu, T. & Hupka, J. (2005) Characterization of porous materials by capillary rise method. Physicochemical Problem of Mineral Processing, 39, 4775.Google Scholar
Duman, O., Tunç, S. & Polat, T.G. (2015) Determination of adsorptive properties of expanded vermiculite for the removal of C. I. Basic Red 9 from aqueous solution: kinetic, isotherm and thermodynamic studies. Applied Clay Science, 109–110, 2232.Google Scholar
El Mouzdahir, Y., Elmchaouri, A., Mahboub, R., Gil, A. & Korili, S.A. (2009) Synthesis of nano-layered vermiculite of low density by thermal treatment. Powder Technology, 189, 25.Google Scholar
Fritz, D.E. (2003) In situ burning of spilled oil in freshwater inland regions of the United States. Spill Science & Technology Bulletin, 8, 331335.Google Scholar
Ge, J., Shi, L.-A., Wang, Y.-C., Zhao, H.-Y., Yao, H.-B., Zhu, Y.-B., Zhang, Y., Zhu, H.-W., Wu, H.-A. & Yu, S.-H. (2017) Joule-heated graphene-wrapped sponge enables fast clean-up of viscous crude-oil spill. Nature Nanotechnology, 12, 434440.Google Scholar
Giesche, H. (2006) Mercury porosimetry: a general (practical) overview. Particle & Particle Systems Characterization, 23, 919.Google Scholar
Hillier, S., Marwa, E.M.M. & Rice, C.M. (2013) On the mechanism of exfoliation of ‘vermiculite’. Clay Minerals, 48, 563582.Google Scholar
Kirdponpattara, S., Phisalaphong, M. & Newby, B.Z. (2013) Applicability of Washburn capillary rise for determining contact angles of powders/porous materials. Journal of Colloid & Interface Science, 397, 169176.Google Scholar
Kujawinski, E.B., Kido Soule, M.C., Valentine, D.L., Boysen, A.K., Longnecker, K. & Redmond, M.C. (2011) Fate of dispersants associated with the Deepwater Horizon oil spill. Environmental Science & Technology, 45, 12981306.Google Scholar
Marcos, C. & Rodríguez, I. (2010) Expansion behaviour of commercial vermiculites at 1000°C. Applied Clay Science, 48, 492498.Google Scholar
Marcos, C. & Rodríguez, I. (2016) Thermoexfoliated commercial vermiculites for Ni2+ removal. Applied Clay Science, 132–133, 685693.Google Scholar
Marcos, C., Arango, Y.C. & Rodriguez, I. (2009) X-ray diffraction studies of the thermal behaviour of commercial vermiculites. Applied Clay Science, 42, 368378.Google Scholar
Mason, G. & Morrow, N.R. (1991) Capillary behavior of a perfectly wetting liquid in irregular triangular tubes. Journal of Colloid Interface Science, 141, 262274.Google Scholar
Medeiros, M.A., Sansiviero, M.T.C., Araújo, M.H. & Lago, R.M. (2009) Modification of vermiculite by polymerization and carbonization of glycerol to produce highly efficient materials for oil removal. Applied Clay Science, 45, 213219.Google Scholar
Mehta, D. & Hawley, M.C. (1969) Wall effect in packed columns. Industrial & Engineering Chemistry Process Design and Development, 8, 280282.Google Scholar
Melvold, R.W. & Gibson, S.C. (1988) A guidance manual for selection and use of sorbents for liquid hazardous substance releases. Journal of Hazardous Materials, 17, 329335.Google Scholar
Nishi, Y., Iwashita, N., Sawada, Y. & Inagaki, M. (2002) Sorption kinetics of heavy oil into porous carbons. Water Research, 36, 50295036.Google Scholar
Radetic, M., Ilic, V., Radojevic, D., Miladinovic, R., Jocic, D. & Jovancic, P. (2008) Efficiency of recycled wool-based nonwoven material for the removal of oils from water. Chemosphere, 70, 525530.Google Scholar
Rajaković-Ognjanović, V., Aleksić, G. & Rajaković, Lj. (2008) Governing factors for motor oil removal from water with different sorption materials. Journal of Hazardous Materials, 154, 558563.Google Scholar
Rashad, A.M. (2016) Vermiculite as a construction material – a short guide for civil engineer. Construction & Building Materials, 125, 5362.Google Scholar
Ren, R.-P., Li, W. & Lv, Y.-K. (2017) A robust, superhydrophobic graphene aerogel as a recyclable sorbent for oils and organic solvents at various temperatures. Journal of Colloid Interface Science, 500, 6368.Google Scholar
Singh, B., Bhattacharya, A., Channashettar, V.A., Jeyaseelan, C.P., Gupta, S., Sarma, P.M., Mandal, A.K. & Lal, B. (2012) Biodegradation of oil spill by petroleum refineries using consortia of novel bacterial strains. Bulletin of Environmental Contamination & Toxicology, 89, 257262.Google Scholar
Suzuki, M., Wada, N., Hines, D.R. & Whittingham, M.S. (1987) Hydration states and phase transitions in vermiculite intercalation compounds. Physical Review B, 36, 28442851.Google Scholar
Udoudo, O., Folorunso, O., Dodds, C., Kingman, S. & Ure, A. (2015) Understanding the performance of a pilot vermiculite exfoliation system through process mineralogy. Minerals Engineering, 82, 8491.Google Scholar
Valášková, M. & Martynková, G.S. (2012) Vermiculite: structural properties and examples of the use. Pp. 209238 in: Clay Minerals in Nature – Their Characterization, Modification and Application (Valaškova, M. & Martynkova, G.S., editors). InTech, London, UK.Google Scholar
Wu, Z.-Y., Li, C., Liang, H.-W., Zhang, Y.-N., Wang, X., Chen, J.-F. & Yu, S.-H. (2014) Carbon nanofiber aerogels for emergent cleanup of oil spillage and chemical leakage under harsh conditions. Scientific Reports, 4, 4079.Google Scholar
Yati, I., Aydin, G.O. & Sonmez, H.B. (2016) Cross-linked poly(tetrahydrofuran) as promising sorbent for organic solvent/oil spill. Journal of Hazardous Materials, 309, 210218.Google Scholar
Zhu, H., Qiu, S., Jiang, W., Wu, D. & Zhang, C. (2011) Evaluation of electrospun polyvinyl chloride/polystyrene fibers as sorbent materials for oil spill cleanup. Environmental Science & Technology, 45, 45274531.Google Scholar