Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Boillat, E
Kolossov, S
Glardon, R
Loher, M
Saladin, D
and
Levy, G
2004.
Finite element and neural network models for process optimization in selective laser sintering.
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
Vol. 218,
Issue. 6,
p.
607.
Kolossov, S.
Boillat, E.
Glardon, R.
Fischer, P.
and
Locher, M.
2004.
3D FE simulation for temperature evolution in the selective laser sintering process.
International Journal of Machine Tools and Manufacture,
Vol. 44,
Issue. 2-3,
p.
117.
Lazarov, Raytcho D.
Lu, Shuai
and
Pereverzev, Sergei V.
2007.
On the balancing principle for some problems of Numerical Analysis.
Numerische Mathematik,
Vol. 106,
Issue. 4,
p.
659.
Tian, Rong
and
Yagawa, Genki
2007.
Non‐matching mesh gluing by meshless interpolation—an alternative to Lagrange multipliers.
International Journal for Numerical Methods in Engineering,
Vol. 71,
Issue. 4,
p.
473.
Kim, Hyun-Gyu
2008.
Development of three-dimensional interface elements for coupling of non-matching hexahedral meshes.
Computer Methods in Applied Mechanics and Engineering,
Vol. 197,
Issue. 45-48,
p.
3870.
Jhabvala, Jamasp
Boillat, Eric
Antignac, Thibaud
and
Glardon, Rémy
2010.
On the effect of scanning strategies in the selective laser melting process.
Virtual and Physical Prototyping,
Vol. 5,
Issue. 2,
p.
99.
Jhabvala, Jamasp
Boillat, Eric
and
Glardon, Rémy
2011.
On the use of EBSD analysis to investigate the microstructure of gold samples built by selective laser melting.
Gold Bulletin,
Vol. 44,
Issue. 2,
p.
113.
Patil, Nachiket
Pal, Deepankar
Khalid Rafi, H.
Zeng, Kai
Moreland, Alleyce
Hicks, Adam
Beeler, David
and
Stucker, Brent
2015.
A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development.
Journal of Manufacturing Science and Engineering,
Vol. 137,
Issue. 4,
Bitencourt, Luís A.G.
Manzoli, Osvaldo L.
Prazeres, Plínio G.C.
Rodrigues, Eduardo A.
and
Bittencourt, Túlio N.
2015.
A coupling technique for non-matching finite element meshes.
Computer Methods in Applied Mechanics and Engineering,
Vol. 290,
Issue. ,
p.
19.
Sohn, Dongwoo
and
Jin, Seungmin
2015.
Polyhedral elements with strain smoothing for coupling hexahedral meshes at arbitrary nonmatching interfaces.
Computer Methods in Applied Mechanics and Engineering,
Vol. 293,
Issue. ,
p.
92.
Sohn, Dongwoo
2018.
Periodic mesh generation and homogenization of inclusion-reinforced composites using an element-carving technique with local mesh refinement.
Composite Structures,
Vol. 185,
Issue. ,
p.
65.
Ghasemi-Tabasi, Hossein
Jhabvala, Jamasp
Boillat, Eric
Ivas, Toni
Drissi-Daoudi, Rita
and
Logé, Roland E.
2020.
An effective rule for translating optimal selective laser melting processing parameters from one material to another.
Additive Manufacturing,
Vol. 36,
Issue. ,
p.
101496.
Meylan, Bastian
Masserey, Alexandre
Boillat, Eric
Calderon, Ivan
and
Wasmer, Kilian
2022.
Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing.
Applied Sciences,
Vol. 12,
Issue. 17,
p.
8409.
Meylan, Bastian
Calderon, Ivan
and
Wasmer, Kilian
2022.
Optimization of Process Parameters for the Laser Polishing of Hardened Tool Steel.
Materials,
Vol. 15,
Issue. 21,
p.
7746.