No CrossRef data available.
Article contents
Grain-size-reducing- and mass-gaining processes in different hydrothermal fault rocks
Published online by Cambridge University Press: 16 May 2022
Abstract
Interactions of hydrothermal and deformation processes in active fault zones are important in light of seismic and geothermal activities. This study investigates different tectonites of the Grimselpass breccia fault, a hydrothermally active strike-slip structure in the Central Alps (Switzerland). We combine microstructural and geochemical investigations to decipher the interaction of grain-size reduction and associated dilation (volume gain) during frictional deformation with geochemical processes such as mass gain via precipitation, grain growth and healing. Three types of tectonites were investigated in the fault zone: (1) cockade-bearing tectonites, (2) cataclasites and (3) fault gouges. They differ in terms of microstructure of clasts, mass and volume gain/loss, as well as type and degree of cementation. Clast size distributions show decreasing median values from low-strain cataclasites to high-strain cataclasites. Mass/volume gains are up to 20 %, with samples of smallest clast sizes often showing the highest mass gain. In the case of cockade-bearing tectonites large volume and mass gain occur. In particular, the precipitation of SiO2-rich cements is inferred to (i) reduce permeability and (ii) induce a gain in strength of the respective fault rocks. Location, timing and degree of healing directly control the fault architecture by deactivating fault strands from the circulation of hydrothermal fluids. In this case, new rupturing events are necessary to reactivate locked fault strands. Such feedback cycles of episodic deformation, mass/volume and clogging preserved hydrothermal circulation and deformation over the last 3.4 Ma, representing a process chain for the long-term preservation of orogenic hydrothermal systems.
- Type
- FLUID FLOW AND MINERALIZATION IN FAULTS AND FRACTURES
- Information
- Geological Magazine , Volume 159 , Issue 11-12: THEMATIC ISSUE: Faults and fractures in rocks: mechanics, occurrence, dating, stress history and fluid flow , November 2022 , pp. 2219 - 2237
- Copyright
- © The Author(s), 2022. Published by Cambridge University Press
References
An, L-J and Sammis, C (1994) Particle size distribution of cataclastic fault materials from southern California: a 3-D study. Pure and Applied Geophysics 143, 203–27.CrossRefGoogle Scholar
Anderson, JL, Osborne, RH and Palmer, DF (1983) Cataclastic rocks of the San Gabriel fault: an expression of deformation at deeper levels in the San Andreas fault zone. Tectonophysics 98, 209–51.CrossRefGoogle Scholar
Belgrano, T, Berger, A and Herwegh, M (2016) Inherited structural controls on fault geometry, architecture and hydrothermal activity: an example from Grimsel Pass, Switzerland. Swiss Journal of Geoscience 109, 345–64.CrossRefGoogle Scholar
Berger, A, Egli, D, Glotzbach, C, Valla, PG, Pettke, T and Herwegh, M (2022) Apatite low-temperature chronometry and microstructures across a hydrothermally active fault zone. Chemical Geology 588, 120633.CrossRefGoogle Scholar
Berger, A and Herwegh, M (2019) Seismicity in the upper crust: cockade structures as a paleo-earthquake proxy in hydrothermal systems. Scientific Reports 9, 1–9.Google Scholar
Berger, A, Herwegh, M, Schwarz, J and Putlitz, B (2011) Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D. Journal of Structural Geology 33, 1751–63.CrossRefGoogle Scholar
Berger, A, Mercolli, I, Herwegh, M and Gnos, E (2016) Geological map of the Aar Massif, Tavetsch and Gotthard nappes (1:100000). Wabern, Schweiz: Geological Special Map, 129. Landesgeologie Schweiz.Google Scholar
Blenkinsop, TG (1991) Cataclasis and processes of particle size reduction. Pure and Applied Geophysics 136, 59–86.CrossRefGoogle Scholar
Bos, B and Spiers, CJ (2000) Effect of phyllosilicates on fluid-assisted healing of gouge-bearing faults, Earth and Planetary Science Letters 184, 199–210.CrossRefGoogle Scholar
Bruhn, RL, Parry, WT, Yonkee, WA and Thompson, T (1994) Fracturing and hydrothermal alteration in normal fault zones. Pure and Applied Geophysics 142, 609–44.CrossRefGoogle Scholar
Caine, JS, Bruhn, RL and Forster, CB (2010) Internal structure, fault rocks, and inferences regarding deformation, fluid flow, and mineralization in the seismogenic Stillwater normal fault, Dixie Valley, Nevada. Journal of Structural Geology 32, 1576–89.CrossRefGoogle Scholar
Caine, JS, Evans, JP, and Forster, CB (1996) Fault zone architecture and permeability structure. Geology 24, 1025–8.2.3.CO;2>CrossRefGoogle Scholar
Carpenter, BM, Ikari, JM and Marone, C (2016) Laboratory observations of time-dependent frictional strengthening and stress relaxation in natural and synthetic fault gouges. Journal of Geophysical Research – Solid Earth 121, 1183–1201. doi: 10.1002/2015JB012136.CrossRefGoogle Scholar
Chester, F, Friedman, M and Logan, J (1985) Foliated cataclasites. Tectonophysics 111, 139–46.CrossRefGoogle Scholar
Chester, FM and Logan, JM (1986) Implications for mechanical properties of brittle faults from observations of the Punchbowl fault zone, California. Pure and Applied Geophysics 124, 79–106.CrossRefGoogle Scholar
Chester, J, Chester, F and Kronenberg, A (2005) Fracture surface energy of the Punchbowl fault, San Andreas system. Nature 437, 133–6.CrossRefGoogle ScholarPubMed
Cortinovis, S, Balsamo, F and Storti, F (2019) Influence of analytical operating procedures on particle size distributions in carbonate cataclastic rocks. Journal of Structural Geology 128, 103884.CrossRefGoogle Scholar
Cox, S, Ikari, MJ, MacLeod, CJ and Fagereng, Å (2021) Frictional characteristics of oceanic transform faults: progressive deformation and alteration controls seismic style. Geophysical Research Letters 48, e2021GL096292.CrossRefGoogle Scholar
Cox, SF (2005) Coupling between deformation, fluid pressures and fluid flow in ore-producing hydrothermal environments. Economic Geology 100th anniversary vol., 39–75.Google Scholar
Cox, SF (2010) The application of failure mode diagrams for exploring the roles of fluid pressure and stress states in controlling styles of fracture-controlled permeability enhancement in faults and shear zones. Geofluids 10, 217–33.Google Scholar
Cox, SF and Munroe, SM (2016) Breccia formation by particle fluidization in fault zones: implications for transitory, rupture-controlled fluid flow regimes in hydrothermal systems. American Journal of Science 316, 241–78.Google Scholar
Diamond, LW, Wanner, C and Waber, HN (2018) Penetration depth of meteoric water in orogenic geothermal systems. Geology 46, 1063–6.CrossRefGoogle Scholar
Egli, D, Baumann, R, Küng, S, Berger, A, Baron, L and Herwegh, M (2018) Structural characteristics, bulk porosity and evolution of an exhumed long-lived hydrothermal system. Tectonophysics 747–748, 239–58.CrossRefGoogle Scholar
Evans, JP and Chester, FM (1995) Fluid-rock interaction in faults of the San Andreas system: inferences from San Gabriel fault rock geochemistry and microstructures. Journal of Geophysical Research – Solid Earth 100, 13007–20.CrossRefGoogle Scholar
Evans, JP, Forster, CB and Goddard, JV (1997) Permeability of fault-related rocks, and implications for hydraulic structure of fault zones. Journal of Structural Geology 19, 1393–1404.CrossRefGoogle Scholar
Faulkner, DR, Jackson, CAL, Lunn, RJ, Schlische, RW, Shipton, Z, Wibberley, CAJ and Withjack, MO (2010) A review of recent developments concerning the structure, mechanics and fluid flow properties of fault zones. Journal of Structural Geology 32, 1557–75.CrossRefGoogle Scholar
Fossen, H and Cavalcante, G (2017) Shear zones: a review. Earth-Science Reviews 171, 434–55.CrossRefGoogle Scholar
Frenzel, M and Woodcock, NH (2014) Cockade breccia: product of mineralisation along dilatational faults. Journal of Structural Geology 68, 194–206. doi: 10.1016/j.jsg.2014.09.001.CrossRefGoogle Scholar
Grant, JA (1986) The isocon diagram: a simple solution to Gresens’ equation for metasomatic alteration. Economic Geology 81, 1976–82.CrossRefGoogle Scholar
Grant, JA (2005) Isocon analysis: a brief review of the method and applications. Physics and Chemistry of the Earth 30, 997–1004.CrossRefGoogle Scholar
Gratier, JP, Favreau, P and Renard, F (2003) Modeling fluid transfer along California faults when integrating pressure solution crack sealing and compaction processes. Journal of Geophysical Research – Solid Earth 108, 2104–2129.CrossRefGoogle Scholar
Gresens, RL (1967) Composition–volume relationships of metasomatism. Chemical Geology 2, 47–65.CrossRefGoogle Scholar
Hadizadeh, J and Johnson, WK (2003) Estimating local strain due to comminution in experimental cataclastic textures. Journal of Structural Geology 25, 1973–9.CrossRefGoogle Scholar
Haines, SH, Kaproth, B, Marone, C, Saffer, D and van der Pluijm, B (2013) Shearzones in clay-rich fault gouge: A laboratory study of fabric development and evolution. Journal of Structural Geology 51, 206–25.CrossRefGoogle Scholar
Handy, MR, Hirth, G and Hovius, N (2007) Continental fault structure and rheology from the frictional-to-viscous transition downward. In Tectonic Faults: Agents of Change on a Dynamic Earth (eds MR Handy, G Hirth and N Hovius), pp. 139–182. Cambridge, Massachusetts: MIT Press.CrossRefGoogle Scholar
Hausegger, S and Kurz, W (2013) Cataclastic faults along the SEMP fault system (Eastern Alps, Austria): a contribution to fault zone evolution, internal structure and paleo-stresses. Tectonophysics 608, 237–51.CrossRefGoogle Scholar
Heilbronner, R and Barrett, S (2014) Image Analysis in Earth Sciences: Microstructures and Textures of Earth Materials. Dordrecht: Springer.CrossRefGoogle Scholar
Heilbronner, R and Keulen, N (2006) Grain size and grain shape analysis of fault rocks. Tectonophysics 427, 199–216.CrossRefGoogle Scholar
Herwegh, M, Kissling, E, Baumberger, R, Berger, A, Wangenheim, C, Wehrens, P, Glotzbach, C and Mock, S (2020) Late stages of continent–continent collision: timing, kinematic evolution and exhumation of the Northern Rim of the Alps. Earth Science Review 200, 102959.CrossRefGoogle Scholar
Hofmann, BA, Helfer, M, Diamond, LW, Villa, IM, Frei, R and Eikenberg, J (2004) Topography-driven hydrothermal breccia mineralization of Pliocene age at Grimsel Pass, Aar massif, Central Swiss Alps. Schweizerische Mineralogische und Petrographische Mitteilungen 84, 271–302.Google Scholar
Holdsworth, RE, Trice, R, Hardman, K, McCaffrey, KJW., Morton, A, Frei, D and Rogers, S (2020) The nature and age of basement host rocks and fissure fills in the Lancaster field fractured reservoir, west of Shetland. Journal of the Geological Society 177, 1057–73.CrossRefGoogle Scholar
Hooker, JN and Fisher, DM (2021) How cementation and fluid flow influence slip behavior at the subduction interface. Geology 49, 1074–8.CrossRefGoogle Scholar
Jebrak, M (1997) Hydrothermal breccias in vein-type ore deposits: a review of mechanisms, morphology and size distribution. Ore Geology Reviews 12, 111–34.CrossRefGoogle Scholar
Kerrich, R, Allison, I, Barnett, RL, Moss, S and Starkey, J (1980) Microstructural and chemical transformations accompanying deformation of granite in a shear zone at Mieville, Switzerland. Contributions to Mineralogy and Petrology 73, 221–42.CrossRefGoogle Scholar
Keulen, N, Heilbronner, R, Stunitz, H, Boullier, AM and Ito, H (2007) Grain size distributions of fault rocks: a comparison between experimentally and naturally deformed granitoids. Journal of Structural Geology 29, 1282–1300.CrossRefGoogle Scholar
Keulen, N, Stünitz, H and Heilbronner, R (2008) Healing microstructures of experimental and natural fault gouge. Journal of Geophysical Research – Solid Earth 113, B06205. doi: 10.1029/2007JB005039.CrossRefGoogle Scholar
Kruhl, J (2013) Fractal-geometry techniques in the quantification of complex rock structures: a special view on scaling regimes, inhomogeneity and anisotropy. Journal of Structural Geology 46, 2–21.CrossRefGoogle Scholar
Laubach, SA, Eichhubl, P, Hilgers, C and Lander, RH (2010) Structural diagenesis. Journal of Structural Geology 32, 1866–72.CrossRefGoogle Scholar
Luther, A, Axen, G and Selverstone, J (2013) Particle-size distributions of ow-angle normal fault breccias: implications for slip mechanisms on weak faults. Journal of Structural Geology 55, 50–61.CrossRefGoogle Scholar
Marquer, D (1989) Transfert de matière et déformation des granitoides. Aspects méthodologiques. Schweizer Mineralogische und Petrographische Mitteilungen 69, 15–35.Google Scholar
Masoch, S, Fondriest, M, Preto, N, Secco, M, and Di Toro, G (2019) Seismic cycle recorded in cockade-bearing faults (Col de Teghime, Alpine Corsica). Journal of Structural Geology 129, 103889.CrossRefGoogle Scholar
Melosh, BL, Rowe, CD, Gerbi, C, Bate, CE and Shulman, D (2016) The spin zone: transient mid-crust permeability caused by coseismic brecciation. Journal of Structural Geology 87, 47–63.CrossRefGoogle Scholar
Melosh, BL, Rowe, CD, Smit, L, Groenewald, C, Lambert, CW and Macey, P (2014) Snap, crackle, pop: dilational fault breccias record seismic slip below the brittle plastic transition. Earth and Planetary Science Letters 403, 432–45.CrossRefGoogle Scholar
Micklethwaite, S (2009) Mechanisms of faulting and permeability enhancement during epithermal mineralisation: Cracow goldfield, Australia. Journal of Structural Geology 31, 288–300.Google Scholar
Micklethwaite, S and Cox, SF (2004) Fault-segment rupture, aftershock-zone fluid flow, and mineralization. Geology 32, 813–16.CrossRefGoogle Scholar
Molnar, L, Tóth, T and Schubert, F (2014) Statistical characterization of brittle and semi-brittle fault rocks: a clast geometry approach. Acta Geodaetica et Geophysica 49, 527–50.CrossRefGoogle Scholar
Monzawa, N and Otsuki, K (2003) Comminution and fluidization of granular fault materials: implications for fault slip behavior. Tectonophysics 367, 127–43.CrossRefGoogle Scholar
Nakatan, M and Scholz, CH (2004) Frictional healing of quartz gouge under hydrothermal conditions: 1. Experimental evidence for solution transfer healing mechanism. Journal of Geophysical Research – Solid Earth 109, B07201. doi: 10.1029/2001JB001522.Google Scholar
Niemeijer, A, Marone, C and Elsworth, D (2010) Frictional strength and strain weakening in simulated fault gouge: competition between geometrical weakening and chemical strengthening. Journal of Geophysical Research – Solid Earth 115, B10207. doi: 10.1029/2009JB000838.CrossRefGoogle Scholar
Niemeijer, AR and Spiers, CJ (2006) Velocity dependence of strength and healing behavior in simulated phyllosilicate-bearing fault gouge. Tectonophysics 427, 231–53.CrossRefGoogle Scholar
Pfeifer, H-R, Sanchez, A and Degueldre, C (1992) Thermal springs in granitic rocks from the Grimsel Pass (Swiss Alps): the late stage of a hydrothermal system related to Alpine orogeny. In 7th International Symposium on Water–Rock Interaction (eds Kharaka, YK and Maest, AS), pp. 1327–31. Rotterdam: Balkema.Google Scholar
Phillips, NJ and Williams, R (2021) To D or not to D? Re-evaluating particle-size distributions in natural and experimental fault rocks. Earth and Planetary Science Letters 553, 116635.CrossRefGoogle Scholar
Rockwell, TK, Sisk, M, Girty, G, Dor, O, Wechsler, N and Ben-Zion, Y (2009) Chemical and physical characteristics of pulverized Tejon Lookout Granite adjacent to the San Andreas and Garlock faults: implications for earthquake physics. Pure and Applied Geophysics 166, 1725–46.CrossRefGoogle Scholar
Rolland, Y, Cox, SF and Corsini, M (2009) Constraining deformation stages in brittle–ductile shear zones from combined field mapping and 40Ar/39Ar dating: the structural evolution of the Grimsel Pass area (Aar Massif, Swiss Alps). Journal of Structural Geology 31, 1377–94.CrossRefGoogle Scholar
Rowe, CD and Griffith, WA (2015) Do faults preserve a record of seismic slip?: a second opinion. Journal of Structural Geology 78, 1–26.CrossRefGoogle Scholar
Rowe, CD, Lamothe, K, Rempe, M, Andrews, M, Mitchell, TM, Di Toro, G and White, JC (2019) Earthquake lubrication and healing explained by amorphous nanosilica. Nature Communications 10, 320.CrossRefGoogle ScholarPubMed
Sammis, CG, King, G and Biegel, R (1987) The kinematics of gouge deformation. Pure and Applied Geophysics 125, 777–812.CrossRefGoogle Scholar
Sammis, CG, Osborne, R, Lawford-Anderson, J, Banerdt, M and White, P (1986) Self-similar cataclasis in the formation of fault Gouge. PAGEOPH 124, 53–78.CrossRefGoogle Scholar
Schaltegger, U (1990) Post-magmatic resetting of Rb-Sr whole rock ages: a study in the Central Aar Granite (Central Alps, Switzerland). Geologische Rundschau 79, 709–24.CrossRefGoogle Scholar
Schmid, S and Handy, M (1991) Towards a genetic classification of fault rocks: geological usage and tectonophysical implications. In Controversies in Modern Geology (eds Müller, D, McKenzie, J and Weissert, H), pp. 339–61. London: Academic Press.Google Scholar
Shao, S-M and Zou, J-C (1996) Fractal research of gouge. Acta Seismologica Sinica 9, 485–91.CrossRefGoogle Scholar
Shipton, ZK, Evans, JP and Thompson, LB (2005) The geometry and thickness of deformation-band fault core and its influence on sealing characteristics of deformation-band fault zones. AAPG Memoir 85, 181–95.Google Scholar
Sibson, R (1977) Fault rocks and fault mechanisms. Journal of the Geological Society of London 133, 191–213.CrossRefGoogle Scholar
Sibson, RH (1986) Brecciation processes in fault zones: inferences from earthquake rupturing. Pure and Applied Geophysics 124, 159–75.CrossRefGoogle Scholar
Stalder, HA (1964) Petrographische und mineralogische Untersuchungen im Grimselgebiet (Mittleres Aarmassiv). Schweizerische Mineralogische und Petrographische Mitteilungen 44, 188–384.Google Scholar
Storti, F, Billi, A and Salvini, F (2003) Particle size distributions in natural carbonate fault rocks: insights for non-self-similar cataclasis. Earth and Planetary Science Letters 206, 173–86.CrossRefGoogle Scholar
Stünitz, H, Keulen, N, Hirose, T and Heilbronner, R (2010) Grain size distribution and microstructures of experimentally sheared granitoid gouge at coseismic slip rates: criteria to distinguish seismic and aseismic faults? Journal of Structural Geology 32, 59–69.CrossRefGoogle Scholar
Tenthorey, E and Cox, SF (2006) Cohesive strengthening of fault zones during the interseismic period: an experimental study. Journal of Geophysical Research – Solid Earth 111, B09202. doi: 10.1029/2005JB004122.CrossRefGoogle Scholar
Tenthorey, E, Cox, SF and Todd, HF (2003) Evolution of strength recovery and permeability during fluid–rock reaction in experimental fault zones. Earth and Planetary Science Letters 206, 161–72.CrossRefGoogle Scholar
Torabi, A and Berg, SS (2011) Scaling of fault attributes: a review. Marine and Petroleum Geology 28, 1444–60.CrossRefGoogle Scholar
Turcotte, DL (1986) Fractals and fragmentation. Journal of Geophysical Research – Solid Earth 91, 1921–6.CrossRefGoogle Scholar
Waber, HN, Schneeberger, R, Mäder, UK and Wanner, C (2017) Constraints on evolution and residence time of geothermal water in granitic rocks at Grimsel (Switzerland). Procedia Earth and Planetary Science 17, 774–7.CrossRefGoogle Scholar
Wanner, C, Diamond, LW and Alt-Epping, P (2019) Quantification of 3-D thermal anomalies from surface observations of an orogenic geothermal system (Grimsel Pass, Swiss Alps). Journal of Geophysical Research – Solid Earth 124, 10839–54.CrossRefGoogle Scholar
Wechsler, N, Allen, EE, Rockwell, TK, Girty, G, Judith, S, Chester, JS and Ben-Zion, Y (2011) Characterization of pulverized granitoids in a shallow core along the San Andreas Fault, Littlerock, CA. Geophysical Journal International 186, 401–17.CrossRefGoogle Scholar
Wehrens, P, Berger, A, Peters, M, Spillmann, T and Herwegh, M (2016) Deformation at the frictional–viscous transition: evidence for cycles of fluid-assisted embrittlement and ductile deformation in the granitoid crust. Tectonphysics 693, 66–84.CrossRefGoogle Scholar
Wehrens, PC, Baumberger, R, Berger, A and Herwegh, M (2017) How is strain localized in a meta-granitoid, mid-crustal basement section? Spatial distribution of deformation in the central Aar massif (Switzerland). Journal of Structural Geology 94, 47–67.CrossRefGoogle Scholar
White, S (1982) Fault rocks of the Moine thrust zone: a guide to their nomenclature. Textures and Microstructures 4, 211–21.CrossRefGoogle Scholar
Williams, RT, Rowe, CD, Okamoto, K, Savage, HM and Eves, E (2021) How fault rocks form and evolve in the shallow San Andreas fault. Geochemistry, Geophysics, Geosystems 22, e2021GC010092.CrossRefGoogle Scholar
Wilson, B, Dewers, T, Reches, Z and Brune, JN (2005) Particle size and energetics of gouge from earthquake rupture zones. Nature 434, 749–52.CrossRefGoogle ScholarPubMed
Wise, D, Dunn, D, Engelder, J, Geiser, P, Hatcher, R, Kish, S, Odom, A and Schamel, S (1984) Fault-related rocks: suggestions for terminology. Geology 12, 391–4.2.0.CO;2>CrossRefGoogle Scholar
Woodcock, N and Mort, K (2008) Classification of fault breccias and related fault rocks. Geological Magazine 145, 435–40.CrossRefGoogle Scholar
Berger and Herwegh supplementary material
Appendix
File
85 KB