Hostname: page-component-848d4c4894-tn8tq Total loading time: 0 Render date: 2024-06-29T03:14:58.295Z Has data issue: false hasContentIssue false
  • English
  • Français

Compact four-way suspended-stripline power divider with low loss and high isolation

Published online by Cambridge University Press:  13 February 2020

Song Guo Open the ORCID record for Song Guo [Opens in a new window] ,
Kaijun Song  and
Yong Fan
Song Guo
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, 611731, China
Kaijun Song*
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, 611731, China
Yong Fan
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, 611731, China
*
Author for correspondence: Kaijun Song, E-mail: ksong@uestc.edu.cn
Get access Rights & Permissions [Opens in a new window]

Abstract

A four-way suspended-stripline power divider is presented in this letter. The power dividing network is designed by using the suspended stripline, while the isolation network is designed by using the microstrip line. The vias are used to connect the power dividing network and the isolation network. The even- and odd-mode analysis method is applied to design the presented power divider. The simulated and measured results of the presented power divider show reasonable agreement with each other. The measured input return loss in the band is greater than 28 dB (7.92 to 9.53 GHz), while the measured insertion loss is less than 0.37 dB. The measured output return loss is greater than 20 dB from 7.82 to 9.86 GHz. Besides, the measured output isolation is greater than 20 dB.

Keywords

Compacthigh isolationlow insertion losspower dividersuspended stripline
Type
Antenna Design, Modeling and Measurements
Information
International Journal of Microwave and Wireless Technologies , Volume 12 , Special Issue 8: Special Issue EuMW 2019. Part II , October 2020 , pp. 749 - 753
Check for updates
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Guo, S, Song, K, Zhou, Y and Fan, Y (2018) Compact ultra-wideband bandpass-response power divider with high-frequency selectivity. International Journal of Microwave and Wireless Technologies 10, 1–6.10.1017/S1759078718001216CrossRefGoogle Scholar
Song, K, Luo, Z, Guo, S, Fan, M and Zhou, Y (2018) Modified Y-junction SIW power divider/combiner circuit. International Journal of Microwave and Wireless Technologies 10, 877–882.10.1017/S1759078718000831CrossRefGoogle Scholar
Guo, L, Li, J, Huang, W, Shao, H and Ba, T (2017) A compact four-way power combiner. IEEE Microwave and Wireless Components Letters 27, 239–241.10.1109/LMWC.2017.2661713CrossRefGoogle Scholar
Yu, T, Tsai, J-H and Chang, Y (2018) A radial four-way power divider with the proposed isolation network. IEEE Microwave and Wireless Components Letters 28, 194–196.10.1109/LMWC.2018.2800532CrossRefGoogle Scholar
Chen, H, Che, W, Wang, X and Feng, W (2017) Size-reduced planar and nonplanar SIW gysel power divider based on low temperature co-fired ceramic technology. IEEE Microwave and Wireless Components Letters 27, 1065–1067.10.1109/LMWC.2017.2765558CrossRefGoogle Scholar
Ruiz-Cruz, JA, Fahmi, MM and Mansour, RR (2011) Generalized multiport waveguide switches based on multiple short-circuit loads in power-divider junctions. IEEE Transactions on Microwave Theory and Techniques 59, 3347–3355.10.1109/TMTT.2011.2170089CrossRefGoogle Scholar
Song, K and Xue, Q (2013) Ultra-wideband ring-cavity multiple-way parallel power divider. IEEE Transactions on Industrial Electronics 60, 4737–4745.10.1109/TIE.2012.2208441CrossRefGoogle Scholar
Khan, AA and Mandal, MK (2016) Miniaturized substrate integrated waveguide (SIW) power dividers. IEEE Microwave and Wireless Components Letters 26, 888–890.10.1109/LMWC.2016.2615005CrossRefGoogle Scholar
Song, K, Mo, Y, Xue, Q and Fan, Y (2014) Wideband four-way out-of-phase slotline power dividers. IEEE Transactions on Industrial Electronics 61, 3598–3606.10.1109/TIE.2013.2279380CrossRefGoogle Scholar
Dong-Sik, E, Jindo, B and Hai-Young, L (2009) Multilayer substrate integrated waveguide four-way out-of-phase power divider. IEEE Transactions on Microwave Theory and Techniques 57, 3469–3476.10.1109/TMTT.2009.2034311CrossRefGoogle Scholar
Fathy, AE, Sung-Woo, L and Kalokitis, D (2006) A simplified design approach for radial power combiners. IEEE Transactions on Microwave Theory and Techniques 54, 247–255.10.1109/TMTT.2005.860302CrossRefGoogle Scholar
Becker, JP and Oudghiri, AM (2005) A planar probe double ladder waveguide power divider. IEEE Microwave and Wireless Components Letters 15, 168–170.10.1109/LMWC.2005.844214CrossRefGoogle Scholar
Ruf, R and Menzel, W (2012) A novel compact suspended stripline resonator. IEEE Microwave and Wireless Components Letters 22, 444–446.10.1109/LMWC.2012.2212004CrossRefGoogle Scholar
Shan, X and Shen, Z (2011) A suspended-substrate Ku-band symmetric radial power combiner. IEEE Microwave and Wireless Components Letters 21, 652–654.10.1109/LMWC.2011.2173325CrossRefGoogle Scholar