Hostname: page-component-7479d7b7d-jwnkl Total loading time: 0 Render date: 2024-07-13T03:37:39.907Z Has data issue: false hasContentIssue false
  • English
  • Français

A dual-band unequal power divider with flexible choice of implementation

Published online by Cambridge University Press:  20 January 2015

Cong Tang ,
Yong Fan  and
Kaijun Song
Cong Tang*
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
Yong Fan
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
Kaijun Song
Affiliation:
EHF Key Lab of Fundamental Science, School of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
*
Corresponding author:C. Tang Email: tangcong712@sina.com
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper, a new asymmetric structure is proposed for the dual-band unequal application, in which both open- and short-ended stubs are applied. Closed-form design equations are obtained for the proposed power divider using the modified even- and odd-mode analysis method. It is observed that the proposed power divider can operate at high frequency ratio from 2.3 to 3.7 and has a wide operating band. Besides, this proposed circuit can offer flexibility in fabrication. For verification, two power dividers operate at 1/2.5 GHz with different values of line impedance are fabricated and tested. There is good agreement between simulation and experimental results, validating the proposed design concepts.

Keywords

Dual bandUnequal power divider/combinerEven- and odd modeWilkinson power divider
Type
Research Paper
Information
International Journal of Microwave and Wireless Technologies , Volume 8 , Issue 2 , March 2016 , pp. 171 - 178
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1]Song, K.; Xue, Q.: Ultra-wideband (uwb) ring-cavity multiple-way parallel power divider. IEEE Trans. Ind. Electron., 60 (2013), 4737–4745.Google Scholar
[2]Eom, D.S.; Byun, J.; Lee, H.Y.: Multilayer substrate integrated waveguide four-way out-of-phase power divider. IEEE Trans. Microw. Theory Tech., 57 (2009), 3469–3476.Google Scholar
[3]Song, K.; Fan, Y.; Zhang, Y.H.: Eight-way substrate integrated waveguide power divider with low insertion loss. IEEE Trans. Microw. Theory Tech., 56 (2008), 1473–1477.Google Scholar
[4]Zou, X.; Tong, C.M.; Yu, D.W.: Y-Junction power divider based on substrate integrated waveguide. Electron. Lett., 47 (2011), 1375–1376.Google Scholar
[5]Song, K.; Fan, Y.; He, Z.R.: Broadband radial waveguide spatial combiner. IEEE Microw. Wirel. Compon. Lett., 18 (2008), 73–75.Google Scholar
[6]Hong, Y.P.; An, Y.J.; Yook, J.G.: Differential radial power combiner using substrate integrated waveguide. Electron. Lett., 46 (2010), 1607–1608.Google Scholar
[7]Xue, Q.; Song, K.: Ultra-wideband coaxial-waveguide power divider with flat group delay response. Electron. Lett., 46 (2010), 1236–1237.CrossRefGoogle Scholar
[8]Song, K.; Xue, Q.: Planar probe coaxial-waveguide power combiner/divider. IEEE Trans. Microw. Theory Tech., 57 (2009), 2761–2767.Google Scholar
[9]Park, M.J.: A dual-band Wilkinson power divider. IEEE Microw. Wirel. Compon. Lett., 18 (2008), 85–87.Google Scholar
[10]Cheng, K.-K.M.; Wong, F.L.: A new Wilkinson power divider design for dual band application. IEEE Microw. Wirel. Compon. Lett., 17 (2007), 664–666.CrossRefGoogle Scholar
[11]Cheng, K.-K.M.; Law, C.: A novel approach to the design and implementation of dual-band power divider. IEEE Trans Microw. Theory Tech, 56 (2008), 487–492.Google Scholar
[12]Dai, G.-L.; Wei, X.-C.: Novel dual-band out-phase power divider with high power-handling capability. IEEE Trans. Microw. Theory Tech., 60 (2012), 2403–2409.Google Scholar
[13]Parad, L.I.; Moynihan, R.L.: Split-tee power divider. IEEE Trans. Microw. Theory Tech., 13 (1965), 91–95.Google Scholar
[14]Wang, X.L.; Sakagami, I.: A generalized dual-band Wilkinson power divider with parallel L, C and R component. IEEE Trans. Microw. Theory Tech., 60 (2012), 952–964.Google Scholar
[15]Lee, A.J.: A dual-band unequal Wilkinson power divider with arbitrary frequency ratios. IEEE Microw. Wirel. Compon. Lett., 19 (2009), 783–785.Google Scholar
[16]Wu, Y.L.; Zhou, H.; Zhang, Y.X.; Liu, Y.A.: An unequal Wilkinson power divider for a frequency and its first harmonic. IEEE Microw. Wirel. Compon. Lett., 18 (2008), 737–739.Google Scholar
[17]Sun, Z.; Zhang, L.; Yan, Y.: Design of unequal dual-band Gysel power divider with arbitrary termination resistance. IEEE Trans. Microw. Theory Tech., 59 (2011), 1955–1962.Google Scholar
[18]Wu, Y.L.; Liu, Y.; Zhang, Y.; Gao, J.: A dual band unequal Wilkinson power divider without reactive components. IEEE Trans. Microw. Theory Tech., 57 (2009), 216–222.Google Scholar
[19]Park, M.J.: Dual-band unequal power divider with simplified structure. IET Microw., Antennas Propag., 5.15 (2011), 1891–1896.Google Scholar
[20]Li, X.; Yang, Y.-J.; Yang, L.: Design of unequal Wilkinson power divider for dual-band operation with isolation stubs. Electron. Lett., 45 (2009), 1245–1247.CrossRefGoogle Scholar
[21]Li, X.; Yang, Y.-J.; Yang, L.: Novel design of unequal Wilkinson power divider for dual-band operation. Microw. Opt. Technol. Lett., 52 (2010), 1736–1739.Google Scholar
[22]Kim, T.; Lee, B.; Park, M.J.: Dual-band unequal Wilkinson power divider with reduced length. Microw. Opt. Technol. Lett., 52 (2010), 1187–1190.Google Scholar
[23]Chen, W.-H.; Liu, Y.-C.; Li, X.: Design of reduced-size unequal power divider for dual-band operation with coupled lines. Electron. Lett., 47 (2011), 59–60.Google Scholar
[24]Yang, I.; Kahng, S.: Dual-band unequal power-divider miniaturized by fully printed CRLH phase-shift lines. European Microwave Conf., 2013, 140–143.Google Scholar
[25]He, Q.; Liu, Y.N.; Wu, Y.L.; Su, M.: An unequal dual-band Wilkinson power divider with slow wave structure. Asia-Pacific Microwave Conf. Proc., 2012, 968–970.CrossRefGoogle Scholar
[26]Cheng, K.K.M.; Li, P.-W.: A novel power-divider design with unequal power-dividing ratio and simple layout. IEEE Trans. Microw. Theory Tech., 57 (2009), 1589–1594.Google Scholar
[27]Monzon, C.: A small dual-frequency transformer in two sections. IEEE Trans. Microw. Theory Tech., 51 (2003), 1157–1161.Google Scholar
[28]Hong, J.S.: Microstrip Filters for RF/Microwave Applications. Wiley, New York, 2001.Google Scholar
[29]Pozar, D.M.: Microwave Engineering. Wiley, New York, 2005.Google Scholar