Hostname: page-component-6d856f89d9-sp8b6 Total loading time: 0 Render date: 2024-07-16T08:33:50.197Z Has data issue: false hasContentIssue false
  • English
  • Français

Computer simulation of the hydraulic milking method

Published online by Cambridge University Press:  01 June 2009

M. Clare Butler  and
Robert J. Grindal
M. Clare Butler
Affiliation:
Silsoe Research Institute, Wrest Park, Silsoe MK45 4HS, UK
Robert J. Grindal
Affiliation:
Silsoe Research Institute, Wrest Park, Silsoe MK45 4HS, UK
Get access Rights & Permissions [Opens in a new window]

Summary

A mathematical model of the interactions within a milking machine teatcup has been developed, which describes the relationship between liner wall movement, pressures and flow rate when milking without an air inlet. It is based on equations of motion for a column of incompressible fluid and requires a second-order, non-linear differential equation to be solved. Incorporating a non-return valve allows hydraulic milking to be modelled, and the comparison between predicted and measured pressures, flow rates and liner wall movement when milking hydraulically is shown. The model can be used to optimize milking conditions to reduce vacuum peaks, improve liner opening and thus maximize flow rate.

Type
Original Articles
Information
Journal of Dairy Research , Volume 59 , Issue 3 , August 1992 , pp. 253 - 264
Copyright
Copyright © Proprietors of Journal of Dairy Research 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Baxter, E. S., Clarke, P. M., Dodd, F. H. & Foot, A. S. 1950 Factors affecting the rate of machine milking. Journal of Dairy Research 17 117–127CrossRefGoogle Scholar
Butler, M. C. 1990 A model of the relationship between liner movement, liquid flow rate and pressures in a milking machine teatcup. Journal of Agricultural Engineering Research 46 291–305Google Scholar
Butler, M. C., Allen, C. J. & Hillerton, J. E. 1990 Methods of measuring and calculating milking performance of cows. Journal of Agricultural Engineering Research 46 245–257Google Scholar
Butler, M. C. & Hillerton, J. E. 1989 Methods of assessing teatcup liner performance. Journal of Agricultural Engineering Research 44 77–86CrossRefGoogle Scholar
Clough, P. A. & Dodd, F. H. 1956 Effect of pulsation rate and ratio on milking rate. Agriculture 63 334–335Google Scholar
Daugherty, R. L. & Franzini, J. B. 1984 Fluid Mechanics with Engineering Applications, 7th edn, p. 87. Tokyo: McGraw-Hill Publishing Co.Google Scholar
Delwiche, M. J., Scott, N. R. & Drost, C. J. 1984 Instantaneous milk flow rate patterns from conventional teatcups. Transactions of the A.S.A.E. 27 214–218Google Scholar
Griffin, T. K., Grindal, R. J. & Bramley, A. J. 1988 A multi-valved milking machine cluster to control intramammary infection in dairy cows. Journal of Dairy Research 55 155–169CrossRefGoogle ScholarPubMed
Grindal, R. J. 1990 Hydraulic milking - liner action and its interaction with milk flow, vacuum beneath the teat and teat condition. Proceedings of the Seminar, Machine Milking and Mastitis, Koldkaergaard, Århus, DenmarkGoogle Scholar
Grindal, R. J. & Griffin, T. K. 1989 Effect of hydraulic milking on milking performance, teat condition and lipolysis. Journal of Dairy Research 56 45–53CrossRefGoogle ScholarPubMed
Grindal, R. J. & Hillehton, J. E. 1991 Influences of milk flow rate on new intramammary infection in dairy cows. Journal of Dairy Research 58 263–268Google Scholar
Grindal, R. J., Walton, A. W. & Hillerton, J. E. 1991 Influence of milk flow rate and streak canal length on new intramammary infection in dairy cows. Journal of Dairy Research 58 383–388Google Scholar
Hamann, J. 1990 Machine-induced teat tissue reactions with emphasis on β-adrenoceptor stimulation. Milchwissenschaft 45 782–786Google Scholar
Mayer, H., Bruckmaier, R. & Schams, D. 1991 Lactational changes in oxytocin release, intramammary pressure and milking characteristics in dairy cows. Journal of Dairy Research 58 159–169Google Scholar
Reitsma, S. Y., Cant, E. J., Grindal, R. J., Westgarth, D. R. & Bramley, A. J. 1981 Effect of duration of teatcup liner closure per pulsation cycle on bovine mastitis. Journal of Dairy Science 64 2240–2245Google Scholar
Reitsma, S. Y. & Scott, N. R. 1979 A frequency response of the dairy cow's teat. Journal of Dairy Research 46 27–33CrossRefGoogle Scholar
Smith, V. R. & Petersen, W. E. 1946 The effect of increasing the negative pressure and widening of the vacuum-release ratio on the rate of removal of milk from the udder. Journal of Dairy Science 29 45–53Google Scholar
Thiel, C. C., Clough, P. A., Westgarth, D. R. & Akam, D. N. 1966 Mechanics of machine milking. II. The flow-rate pattern within single pulsation cycles. Journal of Dairy Research 33 177–191CrossRefGoogle Scholar
Thiel, C. C. & Mem, G. A. 1977 Action of the cluster during milking. In Machine Milking, pp. 116–155 (Eds Thiel, C. C. and Dodd, F. H.). Reading: NIRD (NIRD Technical Bulletin no. 1)Google Scholar
Thompson, P. D. 1981 Milking machines - the past twenty-five years. Journal of Dairy Science 64 1344–1357Google Scholar
Thompson, P. D. & Campbell, L. E. 1972 Measurement of teat flow velocity during machine milking. American Society of Agricultural Engineers paper no. 72–932Google Scholar
Thompson, P. D. & Millar, R. H. 1974 Retrograde flow of milk within machine-milked teats. Journal of Dairy Science 57 1489–1496Google Scholar
Williams, D. M., Mein, G. A. & Brown, M. R. 1981 Biological responses of the bovine teat to milking: information from measurements of milk flow-rate within single pulsation cycles. Journal of Dairy Research 48 7–21Google Scholar