Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-18T08:09:43.045Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of riblet shapes on the occurrence of Kelvin–Helmholtz rollers

Published online by Cambridge University Press:  02 March 2021

S. Endrikat Open the ORCID record for S. Endrikat [Opens in a new window] ,
D. Modesti Open the ORCID record for D. Modesti [Opens in a new window] ,
R. García-Mayoral Open the ORCID record for R. García-Mayoral [Opens in a new window] ,
N. Hutchins  and
D. Chung Open the ORCID record for D. Chung [Opens in a new window]
S. Endrikat*
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Victoria3010, Australia
D. Modesti
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Victoria3010, Australia
R. García-Mayoral
Affiliation:
Department of Engineering, University of Cambridge, CambridgeCB2 1PZ, UK
N. Hutchins
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Victoria3010, Australia
D. Chung
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Victoria3010, Australia
*
†Email address for correspondence: s.endrikat@student.unimelb.edu.au
Get access Rights & Permissions [Opens in a new window]

Abstract

We investigate turbulent flow over streamwise-aligned riblets (grooves) of various shapes and sizes. Small riblets with spacings of typically less than $20$ viscous units are known to reduce skin-friction drag compared to a smooth wall, but larger riblets allow inertial-flow mechanisms to appear and cause drag reduction to break down. One of these mechanisms is a Kelvin–Helmholtz instability that García-Mayoral & Jiménez (J. Fluid Mech., vol. 678, 2011, pp. 317–347) identified in turbulent flow over blade riblets. In order to evaluate its dependence on riblet shape and thus gain a broader understanding of the underlying physics, we generate an extensive data set comprising 21 cases using direct numerical simulations of fully developed minimal-span channel flow. The data set contains six riblet shapes of varying sizes between maximum drag reduction and significant drag increase. Comparing the flow fields over riblets to that over a smooth wall, we find that in this data set only large sharp-triangular and blade riblets have a drag penalty associated with the Kelvin–Helmholtz instability and that the mechanism appears to be absent for blunt-triangular and trapezoidal riblets of any size. We therefore investigate two indicators for the occurrence of Kelvin–Helmholtz rollers in turbulent flow over riblets. First, we confirm for all six riblet shapes that the groove cross-sectional area in viscous units serves as a proxy for the wall-normal permeability that is necessary for the development of Kelvin–Helmholtz rollers. Additionally, we find that the occurrence of the instability correlates with a high momentum absorption at the riblet tips. The momentum absorption can be qualitatively predicted using Stokes flow.

JFM classification

Flow Control: Drag reduction Turbulent Flows: Turbulent boundary layers
Type
JFM Papers
Information
Journal of Fluid Mechanics , Volume 913 , 25 April 2021 , A37
Check for updates
Copyright
© The Author(s), 2021. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Abderrahaman-Elena, N., Fairhall, C.T. & García-Mayoral, R. 2019 Modulation of near-wall turbulence in the transitionally rough regime. J. Fluid Mech. 865, 1042–1071.CrossRefGoogle Scholar
Bechert, D., Bruse, M., Hage, W., van der Hoeven, J. & Hoppe, G. 1997 Experiments on drag-reducing surfaces and their optimization with an adjustable geometry. J. Fluid Mech. 338, 59–87.CrossRefGoogle Scholar
Bilinsky, H. 2019 Direct contactless microfabrication of 3D riblets: Improved capability and metrology. In AIAA Scitech 2019 Forum. AIAA Paper 2019-1626.CrossRefGoogle Scholar
Breugem, W.P., Boersma, B.J. & Uittenbogaard, R.E. 2006 The influence of wall permeability on turbulent channel flow. J. Fluid Mech. 562, 35–72.CrossRefGoogle Scholar
Chan, L., MacDonald, M., Chung, D., Hutchins, N. & Ooi, A. 2018 Secondary motion in turbulent pipe flow with three-dimensional roughness. J. Fluid Mech. 854, 5–33.CrossRefGoogle Scholar
Chavarin, A., Gómez-de-Segura, G., García-Mayoral, R. & Luhar, M. 2020 Resolvent-based predictions for turbulent flow over anisotropic permeable substrates. arXiv:2006.01378.CrossRefGoogle Scholar
Chavarin, A. & Luhar, M. 2019 Resolvent analysis for turbulent channel flow with riblets. AIAA J. 58 (2), 589–599.CrossRefGoogle Scholar
Choi, H., Moin, P. & Kim, J. 1993 Direct numerical simulation of turbulent flow over riblets. J. Fluid Mech. 255, 503–539.CrossRefGoogle Scholar
Chu, D.C. & Karniadakis, G.E. 1993 A direct numerical simulation of laminar and turbulent flow over riblet-mounted surfaces. J. Fluid Mech. 250, 1–42.CrossRefGoogle Scholar
Chung, D., Chan, L., MacDonald, M., Hutchins, N. & Ooi, A. 2015 A fast direct numerical simulation method for characterising hydraulic roughness. J. Fluid Mech. 773, 418–431.CrossRefGoogle Scholar
Clauser, F.H. 1956 The turbulent boundary layer. Adv. Appl. Mech. 4, 1–51.CrossRefGoogle Scholar
Coceal, O. & Belcher, S.E. 2004 A canopy model of mean winds through urban areas. Q. J. Royal Meteorol. Soc. 130 (599), 1349–1372.CrossRefGoogle Scholar
Deyn, L., Coppini, L., Hehner, M., Kriegseis, J., Gatti, D., Forooghi, P. & Frohnapfel, B. 2019 Riblets in fully developed turbulent channel flow – an experimental campaign. In European Drag Reduction and Flow Control Meeting (ed. D. Gatti, B. Frohnapfel & K.-S. Choi).Google Scholar
Drazin, P.G. & Reid, W.H. 2004 Hydrodynamic Stability, 2nd edn. Cambridge Mathematical Library.CrossRefGoogle Scholar
van Driest, E.R. 1956 On turbulent flow near a wall. J. Aero. Sci. 23 (11), 1007–1011.CrossRefGoogle Scholar
Dunn, C., Lopez, F. & Garcia, M. 1996 Mean flow and turbulence in a laboratory channel with simulated vegetation. Civil Engineering Studies Hydraulic Engineering Series (51), 0–162.Google Scholar
Endrikat, S., Modesti, D., MacDonald, M., García-Mayoral, R., Hutchins, N. & Chung, D. 2020 Direct numerical simulations of turbulent flow over various riblet shapes in minimal-span channels. Flow Turbul. Combust. 1–29.Google Scholar
Finnigan, J. 2000 Turbulence in plant canopies. Annu. Rev. Fluid Mech. 32 (1), 519–571.CrossRefGoogle Scholar
Flores, O. & Jiménez, J. 2010 Hierarchy of minimal flow units in the logarithmic layer. Phys. Fluids 22 (7), 071704.CrossRefGoogle Scholar
García-Mayoral, R., Gómez-de-Segura, G. & Fairhall, C.T. 2019 The control of near-wall turbulence through surface texturing. Fluid Dyn. Res. 51 (1), 011410.CrossRefGoogle Scholar
García-Mayoral, R. & Jiménez, J. 2011 a Drag reduction by riblets. Phil. Trans. R. Soc. Lond. A 369 (1940), 1412–1427.Google ScholarPubMed
García-Mayoral, R. & Jiménez, J. 2011 b Hydrodynamic stability and breakdown of the viscous regime over riblets. J. Fluid Mech. 678, 317–347.CrossRefGoogle Scholar
García-Mayoral, R. & Jiménez, J. 2012 Scaling of turbulent structures in riblet channels up to ${Re_\tau \approx 550}$. Phys. Fluids 24 (10), 105101.CrossRefGoogle Scholar
Goldstein, D. & Tuan, T.C. 1998 Secondary flow induced by riblets. J. Fluid Mech. 363, 115–151.CrossRefGoogle Scholar
Gómez-de-Segura, G. & García-Mayoral, R. 2019 Turbulent drag reduction by anisotropic permeable substrates – analysis and direct numerical simulations. J. Fluid Mech. 875, 124–172.CrossRefGoogle Scholar
Gómez-de-Segura, G., Sharma, A. & García-Mayoral, R. 2018 a Turbulent drag reduction using anisotropic permeable substrates. Flow Turbul. Combust. 100 (4), 995–1014.CrossRefGoogle ScholarPubMed
Gómez-de-Segura, G., Sharma, A. & García-Mayoral, R. 2018 b Virtual origins in turbulent flows over complex surfaces. In Center for Turbulence Research Proceedings of the Summer Program 2018 (ed. Moin, P. & Urzay, J.), vol. 3, pp. 277–286. Stanford University.Google Scholar
Ham, F., Mattsson, K. & Iaccarino, G. 2006 Accurate and stable finite volume operators for unstructured flow solvers. In Center for Turbulence Research, Stanford University/NASA AMES, Annual Research Briefs (ed. P. Moin & N.N. Mansour), pp. 243–261. Stanford University.Google Scholar
Ham, F., Mattsson, K., Iaccarino, G. & Moin, P. 2007 Towards time-stable and accurate LES on unstructured grids. In Complex Effects in Large Eddy Simulations (ed. S.C. Kassinos, C.A. Langer, G. Iaccarino & P. Moin), pp. 235–249. Springer.CrossRefGoogle Scholar
Hwang, Y. 2013 Near-wall turbulent fluctuations in the absence of wide outer motions. J. Fluid Mech. 723, 264–288.CrossRefGoogle Scholar
Iwamoto, K., Suzuki, Y. & Kasagi, N. 2002 Reynolds number effect on wall turbulence: toward effective feedback control. Intl J. Heat Fluid Flow 23 (5), 678–689.CrossRefGoogle Scholar
Jelly, T. & Busse, A. 2018 Reynolds and dispersive shear stress contributions above highly skewed roughness. J. Fluid Mech. 852, 710–724.CrossRefGoogle Scholar
Jiménez, J. & Moin, P. 1991 The minimal flow unit in near-wall turbulence. J. Fluid Mech. 225, 213–240.CrossRefGoogle Scholar
Jiménez, J., Uhlmann, M., Pinelli, A. & Kawahara, G. 2001 Turbulent shear flow over active and passive porous surfaces. J. Fluid Mech. 442, 89–117.CrossRefGoogle Scholar
Kim, D. & Choi, H. 2000 A second-order time-accurate finite volume method for unsteady incompressible flow on hybrid unstructured grids. J. Comput. Phys. 162 (2), 411–428.CrossRefGoogle Scholar
Kramer, M. 1937 Patentschrift: Einrichtung zur Verminderung des Reibungswiderstandes. Reichspatentamt 1939, Klasse 62b, Gruppe 408 669897.Google Scholar
Letcher, J., Marshall, J., Oliver, J. III & Salvesen, N. 1987 Stars and stripes. Sci. Am. 257 (2).CrossRefGoogle Scholar
Linde, P. & Hegenbart, M. 2019 Riblet film for reducing the air resistance of aircraft. US Patent (US 2019/0047684 A1).Google Scholar
Liu, C., Kline, S. & Johnston, J. 1966 An experimental study of turbulent boundary layer on rough walls. Report, Thermosciences Division, Department of Mechanical Engineering, Stanford University (MD-15).Google Scholar
Liu, K., Christodoulout, C., Ricciust, O. & Joseph, D. 1990 Drag reduction in pipes lined with riblets. AIAA J. 28 (10), 1697–1698.CrossRefGoogle Scholar
Luchini, P. 1996 Reducing the turbulent skin friction. Comput. Meth. Appl. Sci. 3, 466–470.Google Scholar
Luchini, P., Manzo, F. & Pozzi, A. 1991 Resistance of a grooved surface to parallel flow and cross-flow. J. Fluid Mech. 228, 87–109.Google Scholar
MacDonald, M., Chan, L., Chung, D., Hutchins, N. & Ooi, A. 2016 Turbulent flow over transitionally rough surfaces with varying roughness densities. J. Fluid Mech. 804, 130–161.CrossRefGoogle Scholar
MacDonald, M., Chung, D., Hutchins, N., Chan, L., Ooi, A. & García-Mayoral, R. 2017 The minimal-span channel for rough-wall turbulent flows. J. Fluid Mech. 816, 5–42.CrossRefGoogle Scholar
Martell, M.B., Perot, J.B. & Rothstein, J.P. 2009 Direct numerical simulations of turbulent flows over superhydrophobic surfaces. J. Fluid Mech. 620, 31–41.CrossRefGoogle Scholar
Moin, P. & Kim, J. 1982 Numerical investigation of turbulent channel flow. J. Fluid Mech. 118, 341–377.CrossRefGoogle Scholar
Monty, J.P., Hutchins, N., Ng, H.C.H., Marusic, I. & Chong, M.S. 2009 A comparison of turbulent pipe, channel and boundary layer flows. J. Fluid Mech. 632, 431–442.CrossRefGoogle Scholar
Moser, R., Kim, J. & Mansour, N. 1999 Direct numerical simulation of turbulent channel flow up to ${R}e_\tau =590$. Phys. Fluids 11 (4), 943–945.CrossRefGoogle Scholar
Nepf, H.M., Ghisalberti, M., White, B. & Murphy, E. 2007 Retention time and dispersion associated with submerged aquatic canopies. Water Resour. Res. 43 (4), 1–10.CrossRefGoogle Scholar
Peet, Y., Sagaut, P. & Charron, Y. 2009 Pressure loss reduction in hydrogen pipelines by surface restructuring. Intl J. Hydrogen Energy 34 (21), 8964–8973.CrossRefGoogle Scholar
Poggi, D., Porporato, A., Ridolfi, L., Albertson, J.D. & Katul, G.G. 2004 The effect of vegetation density on canopy sub-layer turbulence. Boundary-Layer Meteorol. 111 (3), 565–587.CrossRefGoogle Scholar
Rastegari, A. & Akhavan, R. 2018 The common mechanism of turbulent skin–friction drag reduction with superhydrophobic longitudinal microgrooves and riblets. J. Fluid Mech. 838, 68–104.CrossRefGoogle Scholar
Raupach, M.R., Finnigan, J.J. & Brunet, Y. 1996 Coherent eddies and turbulence in vegetation canopies: the mixing-layer analogy. Boundary-Layer Meteorol. 25, 351–382.CrossRefGoogle Scholar
Rayleigh, L. 1879 On the stability, or instability, of certain fluid motions. Proc. Lond. Math. Soc. s1-11 (1), 57–72.CrossRefGoogle Scholar
Schrauf, G. 2005 Status and perspectives of laminar flow. Aeronaut. J. 109 (1102), 639–644.CrossRefGoogle Scholar
Sharma, A. & García-Mayoral, R. 2020 a Scaling and dynamics of turbulence over sparse canopies. J. Fluid Mech. 888, A1.CrossRefGoogle Scholar
Sharma, A. & García-Mayoral, R. 2020 b Turbulent flows over dense filament canopies. J. Fluid Mech. 888, A2.CrossRefGoogle Scholar
Singh, R., Bandi, M.M., Mahadevan, A. & Mandre, S. 2016 Linear stability analysis for monami in a submerged seagrass bed. J. Fluid Mech. 786, R1.CrossRefGoogle Scholar
Spalart, P.R. & McLean, D. 2011 Drag reduction: enticing turbulence, and then an industry. Phil. Trans. R. Soc. Lond. A 369, 1556–1569.Google ScholarPubMed
Szodruch, J. 1991 Viscous drag reduction on transport aircraft. In 29th Aerospace Sciences Meeting. AIAA Paper 1991-685.CrossRefGoogle Scholar
Vinuesa, R., Prus, C., Schlatter, P. & Nagib, H.M. 2016 Convergence of numerical simulations of turbulent wall-bounded flows and mean cross-flow structure of rectangular ducts. Meccanica 51 (12), 3025–3042.CrossRefGoogle Scholar
Walsh, M. 1982 Turbulent boundary layer drag reduction using riblets. In 20th Aerospace Sciences Meeting. AIAA Paper 1982-169.CrossRefGoogle Scholar
Walsh, M. & Lindemann, A. 1984 Optimization and application of riblets for turbulent drag reduction. In 22nd Aerospace Sciences Meeting. AIAA Paper 1984-347.CrossRefGoogle Scholar
Walsh, M. & Weinstein, L. 1978 Drag and heat transfer on surfaces with small longitudinal fins. In 11th Fluid and Plasma Dynamics Conference. AIAA Paper 1987-1161.CrossRefGoogle Scholar
White, B.L. & Nepf, H.M. 2007 Shear instability and coherent structures in shallow flow adjacent to a porous layer. J. Fluid Mech. 593, 1–32.CrossRefGoogle Scholar