Hostname: page-component-77c89778f8-rkxrd Total loading time: 0 Render date: 2024-07-21T13:39:10.605Z Has data issue: false hasContentIssue false
  • English
  • Français

Liquid-metal flow in an insulated rectangular expansion with a strong transverse magnetic field

Published online by Cambridge University Press:  26 April 2006

John S. Walker  and
Basil F. Picologlou
John S. Walker
Affiliation:
Department of Mechanical and Industrial Engineering, Universtiy of Illinois, Urbana, IL 61801, USA
Basil F. Picologlou
Affiliation:
Technology Development Division, Argonne National Labloratory, Argonne, IL 60439, USA
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper concerns a steady liquid-metal flow through an expansion or contraction with electrically insulated walls, with rectangular cross-sections and with a uniform, transverse, externally applied magnetic field. One pair of duct walls is parallel to the applied magnetic field, and the other pair diverges or converges symmetrically about a plane which is perpendicular to the field. The magnetic field is assumed to be sufficiently strong that inertial effects can be neglected and that the well-known Hartmann-layer solution is valid for the boundary layers on the walls which are not parallel to the magnetic field. A general treatment of three-dimensional flows in constant-area ducts is presented. An error in the solution of Walker et al. (1972) is corrected. A smooth expansion between two different constant-area ducts is treated. In the expansion the flow is concentrated inside the boundary layers on the sides which are parallel to the magnetic field, while the flow at the centre of the duct is very small and may be negative for a large expansion slope. In each constant-area duct, the flow evolves from a concentration near the sides at the junction with the expansion to the appropriate fully developed flow far upstream or downstream of the expansion. The pressure drop associated with the three-dimensional flow increases as the slope. increases.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 305 , 25 December 1995 , pp. 111 - 126
Copyright
© 1995 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Canuto C. Hussaini, M. Y., Quarteroni, A. & Zang, T. A. 1988, Spectral Methods in Fluid Dynamics. Springer.
Cook, L. P. LUDFORD G. S. S. & Walker, J. S. 1972 Corner regions in the asymptotic solution of ε∇2u = ∂u/∂y with reference to MHD duct flow. Proc. Camb. Phil. Soc. 72, 117–122.Google Scholar
Hunt, J. C. R. & Ludford, G. S. S. 1968 Three-dimensional MHD duct flow with strong transverse magnetic fields. Part. 1. Obstacles in a constant-area channel. J. Fluid. Mech. 33, 693–714.Google Scholar
Moreau, R. 1990 Magnetohydrodynamics Kluwer.
Roberts, P. H., 1967, An Introduction to Magnetohydrodynamics Elsevier.
Ting, A., Hua, T. Q., Walker, J. S. & Picologlou, B. F. 1993 Liquid metal flow in a rectangular duct with thin metal walls and with a non-uniform magnetic field. Intl. J. Engng. Sci. 31 357–372.Google Scholar
Walker, J. S. & Ludford, G. S. S. 1972 Three-dimensional MHD duct flows with strong transversc magnctic fields. Part 4. Fully insulated, variable-area rectangular ducts with small divergences. J. Fluid Mech. 56, 481–496.Google Scholar
Walker, J. S. & Ludford, G. S S. & Hunt J. C. R. 1972 Three-dimensional MHD duct flows with strong transverse magnetic fields. Part 3. Variable-area rectangular ducts with insulating walls. J. Fluid. Mech. 56 121–141.Google Scholar