Hostname: page-component-7479d7b7d-fwgfc Total loading time: 0 Render date: 2024-07-10T06:07:32.696Z Has data issue: false hasContentIssue false
  • English
  • Français

The locking-on of vortex shedding due to the cross-stream vibration of circular cylinders in uniform and shear flows

Published online by Cambridge University Press:  29 March 2006

P. K. Stansby
P. K. Stansby
Affiliation:
Atkins Research and Development, Ashley Road, Epsom, Surrey, England Present address: Department of Civil Engineering, University of Salford, Salford M5 4WT, England.
Get access Rights & Permissions [Opens in a new window]

Abstract

The frequencies of vortex shedding from circular cylinders forced to oscillate transversely in low-turbulence uniform and shear flows were investigated. The stream velocity in the shear flow varied linearly with spanwise distance.

In both flows the vortex shedding frequency locked on to the cylinder frequency and to submultiples of the cylinder frequency. In uniform flow the range of cylinder frequencies for locking-on was dependent on the amplitude of oscillation and Reynolds number. At the boundaries of locking-on at the cylinder frequency locked-on shedding was intermittent with unforced shedding and locking-on was accompanied by a change in wake width. At a particular cylinder frequency near mid-range it is conjectured that the wake width jumped from being greater to being less than that for the stationary cylinder. In shear flow the spanwise extent of locking-on at the cylinder frequency was explained by considering the uniform flow results and the inclination of shed vortices in shear flow. At the spanwise boundaries of this locking-on, locked-on cells were shed intermittently with unforced cells which were more stable in frequency than the corresponding cells for the stationary cylinder.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 74 , Issue 4 , 22 April 1976 , pp. 641 - 665
Copyright
© 1976 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bishop, R. E. D. & Hassan, A. Y. 1964 Proc. Roy. Soc. A 277, 51.
Elder, J. W. 1959 J. Fluid Mech. 5, 355.
Linke, W. 1931 Phys. Z. 32, 900.
Mair, W. A. & Stansby, P. K. 1975 SIAM J. Appl. Math. 28, 519.
Maskell, E. C. 1965 Aero. Res. Counc. R. & M. no. 3400.
Maull, D. J 1969 AGARD Conf. Proc. no. 48, paper 16.
Maull, D. J. & Young, R. A. 1973 J. Fluid Mech. 60, 401.
Owen, P. R. & Zienkiewicz, K. H. 1957 J. Fluid Mech. 2, 521.
Roshko, A. 1954 N.A.C.A. Tech. Note, nos. 3168, 3169.
Simmons, J. E. L. 1974 J. Fluid Mech. 64, 599.
Stansby, P. K. 1974 Aero. J. 78, no. 757.