Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-18T13:54:15.022Z Has data issue: false hasContentIssue false

Model for thermal convection with uniform volumetric energy sources

Published online by Cambridge University Press:  25 May 2021

M. Creyssels*
Affiliation:
Ecole Centrale de Lyon, CNRS, Univ Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130Ecully, France
*
Email address for correspondence: mathieu.creyssels@ec-lyon.fr

Abstract

A theoretical model is derived to predict the heat fluxes at the upper and lower horizontal surfaces of an internally heated (IH) convection cell by extending the well-known Grossmann & Lohse (Phys. Rev. Lett., vol. 86, 2001, pp. 3316–3319) theory. The approach of Creyssels (J. Fluid Mech., vol. 900, 2020, p. A39) is generalized for a fluid heated internally and uniformly, confined between top and bottom plates of equal temperature. For each plate, a Nusselt number is defined and an analytical formula is given to predict its variations with the Rayleigh and Prandtl numbers. The turbulent flow produced in the upper half of the IH convection cell is very similar to that observed in standard Rayleigh–Bénard convection. On the contrary, the lower plate is swept by the large scale flow that circulates through the entire cell. The corresponding boundary layer is therefore modelled by a laminar boundary layer of the Blasius type. These predictions are consistent with the independent theoretical scalings proposed by Wang et al. (Geophys. Res. Lett., vol. 48, issue 4, 2021, p. e2020GL091198) and they are confirmed by the numerical results obtained by Goluskin & van der Poel (J. Fluid Mech., vol. 791, 2016, p. R6) and Wang et al. (Geophys. Res. Lett., vol. 48, issue 4, 2021, p. e2020GL091198).

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bouillaut, V., Lepot, S., Aumaître, S. & Gallet, B. 2019 Transition to the ultimate regime in a radiatively driven convection experiment. J. Fluid Mech. 861, R5.CrossRefGoogle Scholar
Creyssels, M. 2020 Model for classical and ultimate regimes of radiatively driven turbulent convection. J. Fluid Mech. 900, A39.CrossRefGoogle Scholar
Goluskin, D. 2015 Internally Heated Convection and Rayleigh–Bénard Convection. Springer.Google Scholar
Goluskin, D. & van der Poel, E.P. 2016 Penetrative internally heated convection in two and three dimensions. J. Fluid Mech. 791, R6.CrossRefGoogle Scholar
Goluskin, D. & Spiegel, E.A. 2012 Convection driven by internal heating. Phys. Lett. A 377, 8392.CrossRefGoogle Scholar
Grossmann, S. & Lohse, D. 2000 Scaling in thermal convection: a unifying view. J. Fluid Mech. 407, 2756.CrossRefGoogle Scholar
Grossmann, S. & Lohse, D. 2001 Thermal convection for large Prandtl numbers. Phys. Rev. Lett. 86, 33163319.CrossRefGoogle ScholarPubMed
Jahn, M. & Reineke, H.H. 1974 Free convection heat transfer with internal heat sources, calculations and measurements. In Proceedings of the 5th International Heat Transfer Conference, pp. 74–78.Google Scholar
Johnston, H. & Doering, C.R. 2009 Comparison of turbulent thermal convection between conditions of constant temperature and constant flux. Phys. Rev. Lett. 102, 064501.CrossRefGoogle ScholarPubMed
Kulacki, F.A. & Goldstein, R.J. 1972 Thermal convection in a horizontal fluid layer with uniform volumetric energy sources. J. Fluid Mech. 55 (2), 271287.CrossRefGoogle Scholar
Lee, S.D., Lee, J.K. & Suh, K.Y. 2007 Boundary condition dependent natural convection in a rectangular pool with internal heat sources. Trans. ASME J. Heat Transfer 129 (5), 679682.CrossRefGoogle Scholar
Lepot, S., Aumaître, S. & Gallet, B. 2018 Radiative heating achieves the ultimate regime of thermal convection. Proc. Natl Acad. Sci. USA 115, 89378941.CrossRefGoogle ScholarPubMed
Mayinger, F., Jahn, M., Reineke, H.H. & Steinberner, U. 1975 Examination of thermohydraulic processes and heat transfer in a core melt. Tech. Rep. Hannover Technical University.Google Scholar
Pandey, A. & Verma, M.K. 2016 Scaling of large-scale quantities in Rayleigh–Bénard convection. Phys. Fluids 28 (9), 095105.CrossRefGoogle Scholar
Ralph, J.C., McGreevy, R. & Peckover, R.S. 1977 Experiments in turbulent thermal convection driven by internal heat sources. In Heat Transfer and Turbulent Buoyant Convection: Studies and Applications for Natural Environment, Buildings, Engineering Systems (ed. D.B. Spalding & N. Afgan), pp. 587–599. Hemisphere.Google Scholar
Roberts, P.H. 1967 Convection in horizontal layers with internal heat generation. Theory. J. Fluid Mech. 30 (1), 3349.CrossRefGoogle Scholar
Schlichting, H. 1979 Boundary-Layer Theory, 7th edn. McGraw Hill.Google Scholar
Shishkina, O., Emran, M.S., Grossmann, S. & Lohse, D. 2017 Scaling relations in large-Prandtl-number natural thermal convection. Phys. Rev. Fluids 2, 103502.CrossRefGoogle Scholar
Stevens, R.J.A.M., van der Poel, E.P., Grossmann, S. & Lohse, D. 2013 The unifying theory of scaling in thermal convection: the updated prefactors. J. Fluid Mech. 730, 295308.CrossRefGoogle Scholar
Wang, Q., Shishkina, O. & Lohse, D. 2021 Scaling in internally heated convection: a unifying theory. Geophys. Res. Lett. 48 (4), e2020GL091198.Google Scholar
Wörner, M., Schmidt, M. & Grötzbach, G. 1997 Direct numerical simulation of turbulence in an internally heated convective fluid layer and implications for statistical modeling. J. Hydraul Res. 35 (6), 773797.CrossRefGoogle Scholar
Zhang, Y., Zhou, Q. & Sun, C. 2017 Statistics of kinetic and thermal energy dissipation rates in two-dimensional turbulent Rayleigh–Bénard convection. J. Fluid Mech. 814, 165184.CrossRefGoogle Scholar
Zhu, X., Mathai, V., Stevens, R.J.A.M., Verzicco, R. & Lohse, D. 2018 Transition to the ultimate regime in two-dimensional Rayleigh–Bénard convection. Phys. Rev. Lett. 120, 144502.CrossRefGoogle ScholarPubMed