Hostname: page-component-5c6d5d7d68-thh2z Total loading time: 0 Render date: 2024-08-18T15:11:55.688Z Has data issue: false hasContentIssue false
  • English
  • Français

Modelling nonlinear thermoacoustic instability in an electrically heated Rijke tube

Published online by Cambridge University Press:  25 May 2011

SATHESH MARIAPPAN  and
R. I. SUJITH
SATHESH MARIAPPAN*
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Madras, Chennai 600036, India
R. I. SUJITH
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Madras, Chennai 600036, India
*
†Email address for correspondence: sathesh.ae@gmail.com
Get access Rights & Permissions [Opens in a new window]

Abstract

An analysis of thermoacoustic instability is performed for a horizontal Rijke tube with an electrical resistance heater as the heat source. The governing equations for this fluid flow become stiff and are difficult to solve by the computational fluid dynamics (CFD) technique, as the Mach number of the steady flow and the thickness of the heat source (compared to the acoustic wavelength) are small. Therefore, an asymptotic analysis is performed in the limit of small Mach number and compact heat source to eliminate the above stiffness problem. The unknown variables are expanded in powers of Mach number. Two systems of governing equations are obtained: one for the acoustic field and the other for the unsteady flow field in the hydrodynamic zone around the heater. In this analysis, the coupling between the acoustic field and the unsteady heat release rate from the heater appears from the asymptotic analysis. Furthermore, a non-trivial additional term, referred to as the global-acceleration term, appears in the momentum equation of the hydrodynamic zone, which has serious consequences for the stability of the system. This term can be interpreted as a pressure gradient applied from the acoustic onto the hydrodynamic zone. The asymptotic stability of the system with the variation of system parameters is presented using the bifurcation diagram. Numerical simulations are performed using the Galerkin technique for the acoustic zone and CFD techniques for the hydrodynamic zone. The results confirm the importance of the global-acceleration term. Bifurcation diagrams obtained from the simulations with and without the above term are different. Acoustic streaming is shown to occur during the limit cycle and its effect on the unsteady heat release rate is discussed.

JFM classification

Acoustics: Aeroacoustics
Type
Papers
Information
Journal of Fluid Mechanics , Volume 680 , 10 August 2011 , pp. 511 - 533
Copyright
Copyright © Cambridge University Press 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Abu-Hijleh, B. A. K. 2003 Numerical simulation of forced convection heat transfer from a cylinder with high conductivity radial fins in cross-flow. Intl J. Therm. Sci. 42 (8), 741–748.CrossRefGoogle Scholar
Anderson, J. D. 2001 Computational Fluid Dynamics: The Basics with Applications, 8th edn. McGraw-Hill.Google Scholar
Andres, J. M. & Ingard, U. 1953 Acoustic streaming at low Reynolds numbers. J. Acoust. Soc. Am. 25, 932–938.CrossRefGoogle Scholar
Apelt, C. J. & Ledwich, M. A. 1979 Heat transfer in transient and unsteady flows past a heated circular cylinder in the range 1 ≤ Re ≤ 40. J. Fluid Mech. 95 (4), 761–777.CrossRefGoogle Scholar
Balasubramanian, K. & Sujith, R. I. 2008 Thermoacoustic instability in a Rijke tube: Non-normality and nonlinearity. Phy. Fluids 20, 044103.CrossRefGoogle Scholar
Bittanti, S., Marco, A. D., Poncia, G. & Prandoni, W. 2002 Identification of a model for thermoacoustic instabilities in a Rijke tube. IEEE Trans. Control Syst. Technol. 10, 490–502.CrossRefGoogle Scholar
Candel, S. 2002 Combustion dynamics and control: Progress and challenges. Proc. Combust. Inst. 29 (1), 1–28.CrossRefGoogle Scholar
Carvalho, J. A., Ferreira, M. A., Bressan, C. & Ferreira, L. G. 1989 Definition of heater location to drive maximum amplitude acoustic oscillations in a Rijke tube. Combust. Flame 76, 17–27.CrossRefGoogle Scholar
Collis, D. C. & Williams, M. J. 1959 Two-dimensional convection from heated wires at low Reynolds numbers. J. Fluid Mech. 6 (3), 357–384.CrossRefGoogle Scholar
Coutanceau, M. & Bouard, R. 1977 Experimental determination of the main features of the viscous flow in the wake of a circular cylinder in uniform translation. Part 1. Steady flow. J. Fluid Mech. 79 (2), 231–256.CrossRefGoogle Scholar
Culick, F. E. C. 2006 Unsteady motions in combustion chambers for propulsion systems. Tech. Rep. AG-AVT-039. RTO AGARDograph.Google Scholar
Fu, W. S. & Tong, B. H. 2002 Numerical investigation of heat transfer from a heated oscillating cylinder in a cross flow. Intl J. Heat Mass Transfer 45 (14), 3033–3043.CrossRefGoogle Scholar
Hantschk, C. C. & Vortmeyer, D. 1999 Numerical simulation of self-excited thermoacoustic instabilities in a Rijke tube. J. Sound Vib. 227, 511–522.CrossRefGoogle Scholar
Heckl, M. A. 1990 Nonlinear acoustic effects in the Rijke tube. Acustica 72, 63–71.Google Scholar
Heckl, M. A. & Howe, M. S. 2007 Stability analysis of the Rijke tube with a Green's function approach. J. Sound Vib. 305, 672–688.CrossRefGoogle Scholar
Kaufmann, A., Nicoud, F. & Poinsot, T. 2002 Flow forcing techniques for numerical simulation of combustion instabilities. Combust. Flame 131 (4), 371–385.CrossRefGoogle Scholar
Klein, R. 1995 Semi-implicit extension of a Godunov-type scheme based on low Mach number asymptotics. Part I. One-dimensional flow. J. Comput. Phys. 121, 213–237.CrossRefGoogle Scholar
Klein, R., Botta, N., Schneider, T., Munz, C. D., Roller, S., Meister, A., Hoffmann, L. & Sonar, T. 2001 Asymptotic adaptive methods for multi-scale problems in fluid mechanics. J. Engng Math. 39, 261–343.CrossRefGoogle Scholar
Kopitz, J. & Polifke, W. 2008 CFD based application of the Nyquist criterion to thermoacoustic instabilities. J. Comput. Phys. 227, 6754–6778.CrossRefGoogle Scholar
Kwon, Y. P. & Lee, B. H. 1985 Stability of the Rijke thermoacoustic oscillation. J. Acoust. Soc. Am. 78, 1414–1420.CrossRefGoogle Scholar
Matveev, K. I. & Culick, F. E. C. 2003 a A model for combustion instability involving vortex shedding. Combust. Sci. Technol. 175 (6), 1059–1083.CrossRefGoogle Scholar
Matveev, K. I. & Culick, F. E. C. 2003 b A study of the transition to instability in a Rijke tube with axial temperature gradient. J. Sound Vib. 264 (3), 689–706.CrossRefGoogle Scholar
McManus, K., Poinsot, T. & Candel, S. 1993 A review of active control of combustion instabilities. Prog. Energy Combust. Sci. 19, 1–29.CrossRefGoogle Scholar
Moeck, J. P., Oevermann, M., Klein, R., Paschereit, C. O. & Schmidt, H. 2009 A two-way coupling for modeling thermoacoustic instabilities in a flat flame Rijke tube. Proc. Combust. Inst. 32 (1), 1199–1207.CrossRefGoogle Scholar
Moeck, J. P., Schmidt, H., Oevermann, M., Paschereit, C. O. & Klein, R. 2007 An asymptotically motivated hydrodynamic-acoustic two-way coupling for modeling thermoacoustic instabilities in a Rijke tube. In ICSV14, Cairns, Australia.Google Scholar
Padmanabhan, M. S. 1975 The effect of nozzle nonlinearities on the nonlinear stability of liquid rocket motors. PhD thesis, Georgia Institute of Technology, Atlanta, USA.Google Scholar
Patankar, S. V. 1980 Numerical Heat Transfer and Fluid Flow. Hemisphere.Google Scholar
Poinsot, T. & Veynante, D. 2005 Theoretical and Numerical Combustion, 2nd edn. Edwards.Google Scholar
Preetham, , Santosh, H. & Liewen, T. 2008 Dynamics of laminar premixed flames forced by harmonic velocity disturbances. J. Propul. Power 24 (6), 1390–1402.CrossRefGoogle Scholar
Press, W. H., Teukolsky, S. A., Vetterling, W. T. & Flannery, B. P. 2007 Numerical Recipes: The Art of Scientific Computing, 3rd edn. Cambridge University Press.Google Scholar
Rayleigh, Lord. 1878 The explanation of certain acoustical phenomena. Nature 18, 319–321.CrossRefGoogle Scholar
Rienstra, S. W. & Hirschberg, A. 2004 An Introduction to Acoustics, IWDE 92-06 edn. Technische Universiteit Eindhoven.Google Scholar
Rijke, P. L. 1859 The vibration of the air in a tube open at both ends. Phil. Mag. 17, 419–422.CrossRefGoogle Scholar
Riley, K. F., Hobson, M. P. & Bence, S. J. 2006 Mathematical Methods for Physics and Engineering, 3rd edn. Cambridge University Press.CrossRefGoogle Scholar
Sarpkaya, T. 1986 Force on a circular cylinder in viscous oscillatory flow at low Keulegan–Carpenter numbers. J. Fluid Mech. 165, 61–71.CrossRefGoogle Scholar
Selimefendigil, F., Föller, S. & Polifke, W. 2008 Nonlinear identification of the unsteady heat transfer of a cylinder in pulsating crossflow. In Intl Conf. on Jets, Wakes and Separated Flows. Technical University Berlin, Berlin, Germany.Google Scholar
Song, W. S., Lee, S., Shin, D. S. & Na, Y. 2006 Thermo-acoustic instability in the horizontal Rijke tube. J. Mech. Sci. Technol. 20, 905–913.CrossRefGoogle Scholar
Telionis, D. P. 1981 Unsteady Viscous Flows. Springer.CrossRefGoogle Scholar
Ting, L., Klein, R. & Knio, O. M. 2007 Vortex Dominated Flows: Analysis and Computation for Multiple Scales, Series in Applied Mathematical Sciences. Springer.Google Scholar
Wu, X. & Moin, P. 2010 Large-activation-energy theory for premixed combustion under the influence of enthalpy fluctuations. J. Fluid Mech. 655, 3–37.CrossRefGoogle Scholar
Wu, X., Wang, M., Moin, P. & Peters, N. 2003 Combustion instability due to the nonlinear interaction between sound and flame. J. Fluid Mech. 497, 23–53.CrossRefGoogle Scholar
Zeytounian, K. H. 2002 Asymptotic Modelling of Fluid Flow Phenomena. Kluwer.Google Scholar
Zinn, B. T. & Lieuwen, T. C. 2006 Combustion Instabilities: Basic Concepts – Combustion Instabilities in Gas Turbine Engines: Operational Experience, Fundamental Mechanisms, and Modeling. AIAA.Google Scholar
Zinn, B. T. & Lores, M. E. 1971 Application of the Galerkin method in the solution of non-linear axial combustion instability problems in liquid rockets. Combust. Sci. Technol. 4, 269–278.CrossRefGoogle Scholar