Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Gavaises, M
2008.
Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions.
International Journal of Engine Research,
Vol. 9,
Issue. 6,
p.
435.
Papoutsakis, A.
Theodorakakos, A.
Giannadakis, E.
Papoulias, D.
and
Gavaises, M.
2009.
LES Predictions of the Vortical Flow Structures in Diesel Injector Nozzles.
Vol. 1,
Issue. ,
Gavaises, M.
Andriotis, A.
Papoulias, D.
Mitroglou, N.
and
Theodorakakos, A.
2009.
Characterization of string cavitation in large-scale Diesel nozzles with tapered holes.
Physics of Fluids,
Vol. 21,
Issue. 5,
Giannadakis, E.
Gavaises, M.
and
Theodorakakos, A.
2009.
The Influence of Variable Fuel Properties in High-Pressure Diesel Injectors.
Vol. 1,
Issue. ,
Čaika, V.
Sampl, P.
Tatschl, R.
Krammer, J.
and
Greif, D.
2009.
Coupled 1D-3D Simulation of Common Rail Injector Flow Using AVL HYDSIM and FIRE.
Vol. 1,
Issue. ,
Ramírez, A. I.
Som, S.
Aggarwal, Suresh K.
Kastengren, A. L.
El-Hannouny, E. M.
Longman, D. E.
and
Powell, C. F.
2009.
Quantitative X-ray measurements of high-pressure fuel sprays from a production heavy duty diesel injector.
Experiments in Fluids,
Vol. 47,
Issue. 1,
p.
119.
Tonini, Simona
Gavaises, Manolis
and
Cossali, Gianpietro Elvio
2010.
Prediction of Liquid and Vapour Penetration of Early-Injection Diesel Sprays.
Vol. 1,
Issue. ,
Katritsis, D G
Theodorakakos, A
Pantos, I
Andriotis, A
Efstathopoulos, E P
Siontis, G
Karcanias, N
Redwood, S
and
Gavaises, M
2010.
Vortex formation and recirculation zones in left anterior descending artery stenoses: computational fluid dynamics analysis.
Physics in Medicine and Biology,
Vol. 55,
Issue. 5,
p.
1395.
Tonini, S
Gavaises, M
Theodorakakos, A
and
Cossali, G E
2010.
Numerical investigation of a multiple injection strategy on the development of high-pressure diesel sprays.
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,
Vol. 224,
Issue. 1,
p.
125.
Dabiri, S.
Sirignano, W. A.
and
Joseph, D. D.
2010.
A numerical study on the effects of cavitation on orifice flow.
Physics of Fluids,
Vol. 22,
Issue. 4,
Salvador, F J
Hoyas, S
Novella, R
and
Martínez-López, J
2011.
Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles.
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,
Vol. 225,
Issue. 4,
p.
545.
Powell, C. F.
Kastengren, A. L.
Liu, Z.
and
Fezzaa, K.
2011.
The Effects of Diesel Injector Needle Motion on Spray Structure.
Journal of Engineering for Gas Turbines and Power,
Vol. 133,
Issue. 1,
Jia, Ming
Xie, Maozhao
Liu, Hong
Lam, Wei-Haur
and
Wang, Tianyou
2011.
Numerical simulation of cavitation in the conical-spray nozzle for diesel premixed charge compression ignition engines.
Fuel,
Vol. 90,
Issue. 8,
p.
2652.
Tonini, Simona
Gavaises, Manolis
and
Cossali, Gianpietro
2011.
Modelling of Transport Phenomena in Diesel Sprays at Late-Cycle Post-Injection Conditions.
Vol. 1,
Issue. ,
Caika, Valdas
and
Sampl, Peter
2011.
Nozzle Flow and Cavitation Modeling with Coupled 1D-3D AVL Software Tools.
Vol. 1,
Issue. ,
Kastengren, Alan
Powell, Christopher F.
Arms, Dohn
Dufresne, Eric M.
Gibson, Harold
and
Wang, Jin
2012.
The 7BM beamline at the APS: a facility for time-resolved fluid dynamics measurements.
Journal of Synchrotron Radiation,
Vol. 19,
Issue. 4,
p.
654.
Bauer, D
Chaves, H
and
Arcoumanis, C
2012.
Measurements of void fraction distribution in cavitating pipe flow using x-ray CT.
Measurement Science and Technology,
Vol. 23,
Issue. 5,
p.
055302.
Yeom, Jeong Kuk
and
Ha, Hyeong Soo
2013.
Design Sensitivity Estimation of Injector Nozzle Hole Considering Cavitation.
Transactions of the Korean Society of Mechanical Engineers A,
Vol. 37,
Issue. 11,
p.
1361.
Sedarsky, David
Idlahcen, Saïd
Rozé, Claude
and
Blaisot, Jean-Bernard
2013.
Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery.
Experiments in Fluids,
Vol. 54,
Issue. 2,
Caika, Valdas
Sampl, Peter
and
Greif, David
2013.
Integrated 1D/2D/3D Simulation of Fuel Injection and Nozzle Cavitation.
SAE International Journal of Engines,
Vol. 6,
Issue. 3,
p.
1544.