1. Introduction
The science of cycling is the subject of many studies reported in books (Wilson & Schmidt Reference Wilson and Schmidt2020) and reviews (Faria, Parker & Faria Reference Faria, Parker and Faria2005a,Reference Faria, Parker and Fariab; Crouch et al. Reference Crouch, Burton, LaBry and Blair2017). Here, we focus on the specific question of the different dynamics observed in road cycling during professional grand tours and their impact on the rewards used (jerseys).
The oldest grand tour is the Tour de France (1903) which was initially 2428 km long in six stages, organized by the newspaper ‘L'Auto’ and inspired by the popular six days on track races (Chany Reference Chany1983; Lucia, Earnest & Arribas Reference Lucia, Earnest and Arribas2003; Mignot Reference Mignot2016). The Giro d'Italia and the Vuelta a España started in 1909 (2448 km) and in 1935 (3425 km), respectively, and were also organized by newspapers, ‘La Gazzetta dello Sport’ and ‘Informaciones’. Since 1919, the leader of the general classification wears the yellow jersey in the Tour (introduced by Henri Desgrange) and the pink jersey in the Giro since 1931. These colours being those of the newspapers L'Auto and La Gazzetta dello Sport. The history for the Vuelta is more complex: the jersey has been orange (1935, 1942, 1977), white (1941), white with a red stripe (1945–1950), yellow (1955–1976, 1978–1997), gold (1998–2009) and finally red since 2010.
Besides the general classification, grand tours also reward the best climber via the classification of the king-of-the-mountains (Tour and Giro since 1933, Vuelta since 1935) and the best sprinter by points classification (Vuelta since 1945, Tour since 1953 and Giro since 1966) (Mignot Reference Mignot2016). The point classification rewards the rider who has accumulated the most points over all the stages. The greatest number of points being awarded to the first place of each stage; however, the scale is not fixed and a greater number of points is awarded for the so-called plain stages intended for sprinters. An intermediate sprint during the stage also allows you to collect points. For these reasons, most of the time the point jersey goes to a sprinter.
All the jerseys were introduced after the first classifications and their colours have their own history: concerning the sprint, the green jersey in the Tour was first introduced in 1953 for the 50th anniversary. The colour green came from the sponsor ‘la belle jardinière’ (Soula Reference Soula2013). The corresponding jerseys for the Vuelta and the Giro appeared in 1955 and 1967.
For the best climber in Tour de France, the polka-dot jersey was introduced in 1975 by Félix Lévitan, director of ‘la Société du Tour de France’, in memory of Henri Lemoine, the French track cyclist used these colours with his teammate Marcel Guimbretière (Carrey Reference Carrey2015). For the Giro, the jersey for the best climber was introduced in 1974 and was initially green (Carrey, Turgis & Endrizzi Reference Carrey, Turgis and Endrizzi2019). For the Vuelta, it appeared in 1976.
While the first few Tour de France were less than 3000 km long, they soon evolved to long editions (${>}$5000 km) divided into 14 to 17 stages. This peaked in 1927 with 5745 km in 17 stages (
$\sim$337 km per stage) where each stage lasted typically
$\sim$14 h, leading to the legend of ‘convicts of the road’. High mountain stages were introduced in 1910 for the Pyrenees (Tourmalet and Aubisque) and in 1911 for the Alps (Galibier). The first time trial appeared in 1934. The current configuration is composed of 21 stages raced over three weeks. General information on the three grand tours in 2019 is summarized in figure 1. We observe that they have almost the same total distance of
$3400\pm 150\ \mbox {km}$ and are run with almost the same average speed of
$39.9\pm 0.7\ \mbox {km}\ \mbox {h}^{-1}$.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig1.png?pub-status=live)
Figure 1. General information for the three grand tours in 2019: for the different jerseys, we indicate the name of the winner, his age, size and mass, as well as, for the leader, his average velocity.
The three grand tours have been the subject of a large number of studies and books (Chany Reference Chany1983; Fallon & Bell Reference Fallon and Bell2005; McGann & McGann Reference McGann and McGann2008, Reference McGann and McGann2012; Carrey et al. Reference Carrey, Turgis and Endrizzi2019). Here, we only discuss the physics involved in road cycling and its impact on these stage races. The general features of grand tours are presented in § 2, the model in § 3 and its connection to the three jerseys is discussed via the phase diagram presented in § 4 prior to the conclusion.
2. General characteristics in road cycling grand tour
The range of velocities observed during Tour de France is presented in figure 2: unsurprisingly, the slowest velocity is measured in high mountain where the mean slope $\bar {\alpha }$ of the order of
$+8\,\%$ is climbed with a characteristic velocity of
$20\ \mbox {km}\ \mbox {h}^{-1}$ (Vogt et al. Reference Vogt, Roecker, Schumacher, Pottgiesser, Dickhuth, Schmid and Heinrich2008). At the opposite limit, one finds the descent where velocities as high as
$100\ \mbox {km}\ \mbox {h}^{-1}$ are regularly recorded (Blocken et al. Reference Blocken, van Druenen, Toparlar and Andrianne2018a).
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig2.png?pub-status=live)
Figure 2. Range of velocities observed during Tour de France: $\alpha$ stands for the slope of the road,
$\bar {\alpha }$ for its mean value and
$T$ for the typical duration of the climb, time trial (TT), sprint and descent (from left to right). Photo credits: T. Vergouwen/AFP/Presse Sport.
In between these two limits we mention the characteristics of flat time trial, where the cyclists typically run one hour at $50\ \mbox {km}\ \mbox {h}^{-1}$ (Earnest et al. Reference Earnest, Foster, Hoyos, Muniesa, Santalla and Lucia2009) and sprints which last typically 10 s and where the athletes reach
$70\ \mbox {km}\ \mbox {h}^{-1}$ over a few seconds (Menaspa, Abbiss & Martin Reference Menaspa, Abbiss and Martin2013; Blocken et al. Reference Blocken, van Druenen, Toparlar and Andrianne2019). Beyond these orders of magnitudes, the precise values of the velocities, slopes and durations for these different stages are presented in the following sections.
Throughout the article we use the classification of stages defined by race organizers (Padilla et al. Reference Padilla, Mujita, Orbananos, Santisteban, Angulo and Goiriena2001): flat stages (FLT), in which the total distance riding uphill is shorter that 13 km, the total altitude change is lower than 800 m and the hills are scattered along the stage, but never at the end of it; semi-mountainous stages (SMT), with a total uphill distance of between 13 and 35 km, and a total altitude change ranging between 800 and 2000 m; high-mountain stages (MT), in which the total uphill distance is longer than 35 km, and the total altitude change is higher than 2000 m. Stages finishing with more than 12 km uphill and an altitude change of more than 800 m are also included in this (MT) category.
The anthropometric profiles of riders in the Tour (body mass $M_c$, height
$L_c$ and body-mass index BMI
$=M_c/L_c^2$) have been studied and correlated to their success during the different types of stages (Lucia, Joyos & Chicharro Reference Lucia, Joyos and Chicharro2000; Santalla et al. Reference Santalla, Earnest, Marroyo and Lucia2012): TT specialists are generally 180 to 185 cm tall, weigh 70 to 75 kg and have a
$\textrm {BMI} \sim 22\ \mbox {kg}\ \textrm {m}^{-2}$. This anthropometry allows them to achieve higher absolute power outputs (W) than climbers (175–180 cm, 60–66 kg, BMI
$=19\text {--}20\ \mbox {kg}\ \textrm {m}^{-2}$), who are better able to maintain a higher power to mass ratio (
$\mbox {W}\ \mbox {kg}^{-1}$) (Padilla et al. Reference Padilla, Mujika, Cuesta and Goiriena1999; Lucia et al. Reference Lucia, Joyos and Chicharro2000).
3. Physics of road cycling
The problem of cycling is sketched in figure 3(a). The dynamics of the rider is governed by the balance of energy
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn1.png?pub-status=live)
where $V$ is the velocity of the centre of mass,
$z$ the vertical elevation,
$g$ gravity and
$M$ stands for the total mass,
$M=M_c+M_b$ (
$M_c$ and
$M_b$ being respectively the mass of the cyclist and of the bike). At the moment the legal minimal mass for bikes on the Tour is
$6.8\ \mbox {kg}$ and the typical mass for bikes in TT is
$8\ \mbox {kg}$. On the right-hand side of (3.1),
$P_m$ is the mechanical power injected by the cyclist and
$P_f$ is the power dissipated by friction (di Prampero et al. Reference di Prampero, Cortili, Mognoni and Saibene1979).
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig3.png?pub-status=live)
Figure 3. Elements for the model: (a) schematics of the cyclist of mass $M_c$ and of his bike of mass
$M_b$ climbing a slope of angle
$\alpha$. (b) Evolution of the power,
$P_m$, with the pedalling rate,
$\dot {\theta }$, for two different athletes (reproduced from Dorel et al. (Reference Dorel, Hautier, Rambaud, Rouffet, Van Praagh, Lacour and Bourdin2005)). (c) Time evolution of the power to mass ratio,
$P_{max}/M_c$, in cycling: the grey points are the maximal mean power (MMP) obtained for 15 riders of Tour de France 2005 ranking from 40 to 150 by Vogt et al. (Reference Vogt, Schumacher, Roecker, Dickhuth, Schoberer, Schmid and Heinrich2007). The different greys are used to differentiate road type (
$\text {FLT}, \text{flat}$;
$\text {SMT}, \text {semi-mountainous}$;
$\text {MT}, \text {mountainous}$). The blue points are the MMP obtained for 9 riders from the same professional team on the Giro 2016 and reported by Sanders & Heijboer (Reference Sanders and Heijboer2019). As for greys, the different blues are used to distinguish the different types of road. Plus dark blue for TT. The orange points corresponds to a single top 10 rider of the Tour de France studied by Pinot & Grappe (Reference Pinot and Grappe2014). The two solid lines correspond to the predictions of the heuristic equation (3.3) using
$\tau =32\ \mbox {s}$,
$\gamma =0.0886$ and
$\varPi =9.7\ \mbox {W}\ \textrm {kg}^{-1}$ for the orange line and
$\varPi =7\ \mbox {W}\ \textrm {kg}^{-1}$ for the blue line.
Studies dedicated to the friction reveal that $P_f$ is mainly composed of aerodynamic and rolling resistance
$P_f=\frac {1}{2}\rho SC_D V^3+\mu M g V$, where
$\rho$ is the density of air,
$S$ is the frontal area of the cyclist and bicycle which experience a drag coefficient
$C_D$ (here, the product
$SC_D$ will be referred to as the ‘drag area’) and
$\mu$ is the rolling resistance coefficient (Martin et al. Reference Martin, Milliken, Cobb, McFadden and Coggan1998; Crouch et al. Reference Crouch, Burton, LaBry and Blair2017). Since the aerodynamic drag increases as
$V^3$ and the rolling resistance as
$V$, there is a velocity
$V_{\mu }$ for which both contributions are equal:
$V_{\mu }=\sqrt {2\mu M g/\rho S C_D}$. Using typical values
$\rho =1.2\ \mbox {kg}\ \textrm {m}^{-3}$,
$SC_D=0.25\ \mbox {m}^{2}$,
$\mu =0.0032$ and
$M=80\ \mbox {kg}$, we get
$V_{\mu }\approx 15\ \mbox {km}\ \mbox {h}^{-1}$. Since the velocities in Tour de France are larger than
$V_{\mu }$ the main contribution will be aerodynamic and we will generally neglect rolling resistance in this study. The only exception will be in the section dedicated to climbing where the velocities get close to
$V_{\mu }$.
Concerning the maximal mechanical power produced by the cyclist, $P_m$, it depends on both the pedalling rate,
$\dot {\theta }$, and the duration of the exercise,
$T$. As shown by Dorel et al. (Reference Dorel, Hautier, Rambaud, Rouffet, Van Praagh, Lacour and Bourdin2005), the relation between the mechanical power and the pedalling rate is parabolic
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn2.png?pub-status=live)
where $\dot {\theta }$ is the pedalling rate,
$\dot {\theta }_{max}$ its maximum value and
$P_{max}(T)$ the maximum power which can be developed over the duration
$T$. Two examples reproduced from Dorel et al. (Reference Dorel, Hautier, Rambaud, Rouffet, Van Praagh, Lacour and Bourdin2005) obtained with track cyclists with
$T=5\ \mbox {s}$ exercises are presented in figure 3(b). For the hollow circles, one reads
$\dot {\theta }_{max}\approx 260\ \mbox {r.p.m.}$ and
$P_{max}\approx 1800\ \mbox {W}$. Since the power is maximal for a given pedalling rate, one expects professional road cyclists to ride at a fix pedalling rate and to use gears to adapt to the road profile. This is indeed what is reported in the literature: considering FLT, SMT and MT stages, Vogt et al. (Reference Vogt, Schumacher, Roecker, Dickhuth, Schoberer, Schmid and Heinrich2007) reports that the average cadense was 87, 86 and 81 r.p.m. respectively’.
The maximum power per unit of mass $P_{max}/M_c$ is presented as a function of time
$T$ on a log–linear scale in figure 3(c): the three different sets of colours (grey, blue and orange) correspond to three different studies. The grey points have been obtained on Tour de France 2005 with 15 different riders ranking from 40 to 150 (Vogt et al. Reference Vogt, Schumacher, Roecker, Dickhuth, Schoberer, Schmid and Heinrich2007). The blue set has been obtained with 9 riders of the same professional team on Giro 2016 (Sanders & Heijboer Reference Sanders and Heijboer2019). For each set, a different intensity is used to distinguish the different types of roads (FLT, SMT, MT). No big difference is observed between the different intensities. We will thus assume that
$P_{max}/M_c$ is independent of the road type. Finally, the orange points have been obtained for a single rider top 10 Tour de France finisher (Pinot & Grappe Reference Pinot and Grappe2014).
The log–linear scale used in figure 3(c) reveals that the power to mass ratio reaches values of the order of $14\text {--}19\ \mbox {W}\ \mbox {kg}^{-1}$ during very short periods (several seconds) and then decreases as the duration of the effort increases down to a quasi-plateau of the order of
$5\text {--}6\ \mbox {W} \ \mbox {kg}^{-1}$, reached after few minutes. For the single rider (orange points) the power to mass ratio is
$18.1\ \textrm {W}\ \textrm {kg}^{-1}$ during 5 s,
$7.2\ \textrm {W}\ \textrm {kg}^{-1}$ after 5 min,
$6.9\ \textrm {W}\ \textrm {kg}^{-1}$ after 10 min,
$5.7\ \textrm {W}\ \textrm {kg}^{-1}$ after 1 h and
$4.9\ \textrm {W}\ \textrm {kg}^{-1}$ after 4 h.
The continuous lines presented in figure 3(c) correspond to the heuristic fit of the power to mass ratio
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn3.png?pub-status=live)
For the two cases plotted in figure 3(c), $\tau =32\ \mbox {s}$,
$\gamma =0.0886$ and
$\varPi =9.7\ \mbox {W}\ \mbox {kg}^{-1}$ for the orange line and
$\varPi =7\ \mbox {W}\ \mbox {kg}^{-1}$ for the blue line. To discuss the records observed in Tour de France we will use the value obtained for the top 10 finisher (
$\varPi =9.7\ \mbox {W}\ \mbox {kg}^{-1}$).
The physical interpretation of this heuristic fit is that the power to mass ratio reaches its maximal value at short times $\lim _{T/\tau \ll 1}(P_{max}/M_c)=2\varPi$ and then decreases over a characteristic time
$\tau$ of the order of
$30\ \mbox {s}$ to a quasi-plateau
$\lim _{T/\tau \gg 1}(P_{max}/M_c)=\varPi [1-\ln (T/\tau )^{\gamma }]$. These two regimes correspond to the anaerobic regime (
$T<\tau$) and to the aerobic regime (
$T\gg \tau$). The initial exponential decrease of the power has already been reported and modelled by Sanders & Heijboer (Reference Sanders and Heijboer2018). In their study, they use a similar value for the characteristic time of the anaerobic phase (
$\tau =38.4\ \mbox {s}$). The log term in the heuristic fit (3.3) describes the slow decrease of the power to mass ratio in the long efforts limit (Morton & Hodgson Reference Morton and Hodgson1996). It accounts for the effect of fatigue: if
$\gamma =0$ there is no fatigue and if
$\gamma$ is positive (
$\gamma > 0$), the larger its value the stronger the effect of fatigue. Figure 3(c) shows that the value
$\gamma =0.0886$ allows us to account for fatigue for the different sets of data taken from the literature.
This discussion on the different terms of (3.1) reveals that the term $P_m$ is ‘active’ and depends on the skills of the cyclist while the three other terms are ‘passive’. Equation (3.1) can thus be rewritten in order to show how the human power
$P_m$ is used:
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn4.png?pub-status=live)
Equation (3.4) thus reveals that human power can be stored in three different terms, the aerodynamic friction $\frac {1}{2}\rho SC_D V^3$, the ascending term
$Mg\alpha V$ and the accelerating term
$\textrm {d}/\textrm {d}t(MV^2/2)$. Each of these terms is connected to different cycling regimes which are discussed below.
3.1. Time trial
The results from all individual TTs in Tour de France from 2010 to 2019 are presented in table 1. For the winner, the average velocity $\bar {V}_{TT}=D/T$, defined as the ratio between the distance
$D$ of the TT and his time
$T$, is indicated in column 9. Even if the distance of TT changes from
$6.4\ \mbox {km}$ to
$54\ \mbox {km}$ we observe that flat TTs (type FLT in blue) are covered with a mean velocity of the order of
$52.5 \pm 2.5\ \mbox {km}\ \mbox {h}^{-1}$ while TTs in mountain regions (type MT in red) have velocities of the order of
$35 \pm 2\ \mbox {km}\ \mbox {h}^{-1}$. We first address the limit of flat TTs and treat the general case in a second step.
Table 1. Results from all individual TTs in Tour de France from 2010 to 2019. Flat TTs are indicated with (FLT), hilly time trials with (SMT) and those in mountains with (MT). The name of the winner is given together with his height $L_c$ and mass
$M_c$. The distance
$D$ of the TT is given together with the best time
$T$. From these values, we calculate the actual average velocity
$\bar {V}_{TT}=D/T$. The expected power is calculated using (3.3) with the time of the race
$T$ and the mass
$M_c$ of the winner. The predicted velocity
$V_{TT}(T)$ is calculated using (3.5). The error between
$\bar {V}_{TT}$ and
$V_{TT}(T)$ is given in the last column.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_tab1.png?pub-status=live)
3.1.1. Flat time trial
Since TT is observed to be a steady effort ($\textrm {d}/\textrm {d}t=0$), (3.4) states that, in the limit of FLT (
$\alpha =0$), the mechanical power is mainly injected in aerodynamical friction so that the equation for flat TT reduces to
$P_m\approx 1/2\rho SC_D V^3$. To maximize his velocity the rider will select
$P_m=P_{max}$ and for long time efforts (
$T\gg \tau$), the power
$P_m$ will reach the quasi-plateau associated with aerobic efforts presented in figure 3(c). One thus deduces the characteristic velocity for flat TT
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn5.png?pub-status=live)
Using $P_{max}(T)=\varPi M_c [1-\ln (T/\tau )^{\gamma }]$ with
$\varPi =9.7\ \mbox {W}\ \mbox {kg}^{-1}$,
$\tau =32$ and
$\gamma =0.0886$ we evaluate
$P_{max}(T)$ for each rider in table 1 (column 10).
Concerning the drag area, $SC_D$, recent experimental and numerical studies have revealed the complex structure of the flow around the cyclist (Crouch et al. Reference Crouch, Burton, Brown, Thompson and Sheridan2014; Hosoi Reference Hosoi2014). This complexity is illustrated in figure 4(a) using the isosurfaces of average streamwise vorticity (reproduced from Griffith et al. Reference Griffith, Crouch, Thompson, Burton, Sheridan and Brown2014). A summary of the values of
$SC_D$ found in wind tunnels and reported in the literature is presented in figure 4(b). For the TT position we observe that
$SC_D\approx 0.25\ \mbox {m}^{-2}$. Using
$\rho =1.2\ \mbox {kg}\ \mbox {m}^{-3}$ we calculate
$V_{TT}(T)$ with (3.5) and evaluate the error with the actual value
$\bar {V}_{TT}$ in the last column of table 1. For all flat TT (FLT in blue) we observe that the error is smaller than
$8\,\%$. For hilly (SMT) and mountain types (MT) the velocity
$V_{TT}$ predicted by assuming
$\alpha =0$ is unsurprisingly larger than the actual one and the discrepancy can reach 50 %.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig4.png?pub-status=live)
Figure 4. Isosurfaces of average streamwise vorticity behind a cyclist as revealed by Griffith et al. (Reference Griffith, Crouch, Thompson, Burton, Sheridan and Brown2014). (b) Reported drag area measurements from wind tunnel testing of cyclists in different positions and different studies: study 1 is Davies (Reference Davies1980), 2 is Kyle & Burke (Reference Kyle and Burke1984), 3 is Martin et al. (Reference Martin, Milliken, Cobb, McFadden and Coggan1998), 4 is Padilla et al. (Reference Padilla, Mujika, Angulo and Goiriena2000), 5 is Jeukendrup & Martin (Reference Jeukendrup and Martin2001), 6 and 7 are Garcia-Lopez et al. (Reference Garcia-Lopez, Rodriguez-Marroyo, Juneau, Peleteiro, Martinez and Villa2008), 8 is Gibertini & Grassi (Reference Gibertini and Grassi2008), 9 is Underwood et al. (Reference Underwood, Schumacher, Burette-Pommay and Jermy2011), 10 is Defraeye et al. (Reference Defraeye, Blocken, Koninckx, Hespel and Carmeliet2010), 11 is Barry et al. (Reference Barry, Burton, Sheridan, Thompson and Brown2014) and 12 is Barry et al. (Reference Barry, Burton, Sheridan, Thompson and Brown2015).
3.1.2. Non-flat time trial
While studying TT performance in § 3.1.1, we underlined that the velocity $V_{TT}$ predicted by (3.5) only holds in the limit of a flat road (
$\alpha =0$). When this limit is not achieved, observations show that the average velocity is significantly reduced (table 1). For the case of the individual TT of the 18th stage of the Tour de France 2016, the road profile is clearly not flat, as illustrated in figure 5(a). As presented in table 1, Froome wins the stage with a mean velocity of
$33.2\ \mbox {km}\ \mbox {h}^{-1}$, far below the
$50\mbox { km/h}$ predicted by (3.5) for the flat TT limit.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig5.png?pub-status=live)
Figure 5. (a) Road profile for the mountain type individual time trial of stage 18 in tour de France 2016 between Sallanches and Megève (Photo credits: AFP/Presse Sport). (b) Table of comparison for the race of the winner C. Froome: $s$ is the distance from departure,
$\alpha$ the slope of the road average over a km,
$t_{meas}$ is the time measured during the race at 4 different locations (6.5 km, 10 km, 13.5 km and arrival),
$V_{TTc}$ is the velocity computed using (3.7),
$t_{calc}$ is the time calculated at each km. The last column compares
$t_{calc}$ and
$t_{meas}$.
To account for gravity, one needs to reconsider the equation of motion (3.4) without the unsteady term (TT is a steady regime) but with the gravitational contribution: $P_m=1/2\rho S C_D V^3+Mg\alpha V$. Using the flat limit expression
$V_{TT}(T)=(2P_{max}(T)/\rho S C_D)^{1/3}$, this equation can be re-written as
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn6.png?pub-status=live)
where $V_{TTc}(s)$ is the velocity at the location
$s$ and
$F=MgV_{TT}(T)/P_{max}(T)$. Using Viete's substitution,
$V_{TTc}(s)/V_{TT}=Y-\alpha F/3Y$ (3.6) is transformed into the quadratic form
$Z^2-Z-(\alpha F/3)^3=0$, where
$Z=Y^3$. Finally, one gets the exact solution for the velocity as a function of the slope
$\alpha$
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn7.png?pub-status=live)
In the small slope limit ($\alpha F/3\ll 1$), this expression reduces to
$V_{TTc}(\alpha )=V_{TT}(1-\alpha F/3)$. The velocity decrease is thus directly proportional to the slope. It also depends on the athlete characteristics via the parameter
$F=MgV_{TT}/P_m=(2M^3g^3/\rho S C_DP_m^2)^{1/3}$. The larger this parameter the larger the relative velocity decrease. In the case of Froome in this stage, one finds
$P_{max}=409.3 \mbox {W}$,
$V_{TT}=13.97\ \mbox {m}\ \mbox {s}^{-1}$ (
$50.3\ \mbox {km}\ \mbox {h}^{-1}$) and
$F=22.1$.
Using the slopes $\alpha (s)$ in the different sections of the stage presented in figure 5(a), one can then evaluate the corresponding velocity
$V_{TTc}(\alpha (s))$ using (3.7) and deduce the time
$t_{calc}(s)=\int _{0}^{s}\textrm {d}s'/V_{TTc}(\alpha (s'))$. This time is presented in the fifth column of figure 5(b). It can be compared to the 4 intermediate times measured during the race at the locations 6.5 km, 10 km, 13.5 km and 17 km. These times are reported in the third column
$t_{meas}$. The error between the estimated and the actual time never exceed 3 % and the mean velocity we calculate is
$33.4\ \textrm {km}\ \textrm {h}^{-1}$, very close to the
$33.2\ \textrm {km}\ \textrm {h}^{-1}$ reported in table 1.
3.2. High mountains
The characteristics of some emblematic mountain climbs associated with Tour de France together with the records reproduced from the book of Vayer & Portoleau (Reference Vayer and Portoleau2001) are presented in table 2.
Table 2. Some classic mountain climbs and their records reproduced from Vayer & Portoleau (Reference Vayer and Portoleau2001). The average slope is indicated in the second column, the length of the climb $D$ in the third and the record time
$T$ in the fifth. From these values we calculate the average velocity
$\bar {V}_{MT}=D/T$ (column 6). The record holder is given in 4 and his height and mass in 7 and 8. Using (3.3) we evaluate the power
$P_{max}(T)$ in column 9. The velocity
$V_{MT0}$ predicted by (3.8) is given in column 10. The corrected velocity
$V_{MT1}$ accounting for the aerodynamic drag and rolling resistance is calculated with (3.9) in column 11. The error between the predicted velocity
$V_{MT1}$ and the actual velocity
$\bar {V}_{MT}$ is indicated in the last column.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_tab2.png?pub-status=live)
The typical mean slope is $8\,\%$, the length varies from
$5$ to
$19\ \mbox {km}$ and the mean velocity for the fastest climbers is
$22 \pm 2\ \mbox {km}\ \mbox {h}^{-1}$. At this velocity, the power consumed through aerodynamical friction is typically
$20\text {--}30\ \mbox {W}$ while the power developed by the rider is still of the order of
$400\ \mbox {W}$. We thus first neglect the aerodynamical drag in our analysis of mountain climb. In the steady regime, (3.4) reduces to the balance between the maximal generated muscle power
$P_m=P_{max}(T)$ and the climbing term
$Mg\alpha V$. This balance leads to the expression of the climbing velocity
$V_{MT0}$:
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn8.png?pub-status=live)
Using (3.3) with $\tau =32\ \mbox {s}$,
$\gamma =0.0886$ and
$\varPi =9.7\ \mbox {W}\ \mbox {kg}^{-1}$ we estimate
$P_{max}(T)$ for all the riders in table 2 (column 9) and deduce the velocity
$V_{MT0}(T)$ (column 10) with (3.8) taking
$M_b=10\ \mbox {kg}$. The predicted velocity is always larger than the actual velocity by typically 20 %–30 %.
To obtain a better prediction, one needs to account for the aerodynamic drag and for the rolling resistance. In the equation $P_m=1/2\rho S C_D V^3+Mg\alpha V+\mu Mg V$, the dominant term in climbing is the one associated with
$\alpha$. Using a perturbative method, we get the correction associated with the extra two terms
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn9.png?pub-status=live)
In the limit $\alpha \gg 1$ the corrective terms vanish and we recover
$V_{MT1}=V_{MT0}$. With
$\mu =0.0032$,
$\rho =1.2\ \mbox {kg}\ \mbox {m}^{-3}$ and
$S C_D=0.25\ \mbox {m}^{2}$, the corrected velocity
$V_{MT1}(T)$ is calculated and the results are listed in column 11 of table 2. The error reported in the last column reveals that the corrected velocity is closer to reality (less than
$10\,{\%}$).
3.3. The sprint
The last term of (3.4) is associated with the acceleration of the rider. This term has been neglected so far since we have only considered phases where the velocity remains mainly constant. This is no longer the case for sprints. Some characteristics of a road sprint are presented in figure 6: the power output recorded in a bunch sprint performed in a professional road cycling competition is presented in figure 6(b) together with the corresponding velocity (Menaspa Reference Menaspa2015). Interestingly, the power data were recorded during a successful sprint. In this example the duration of the final sprint is $11\ \mbox {s}$, and the mean power is
$1020\ \mbox {W}$ (peak power
$1248\ \mbox {W}$), with a maximal recorded speed of
$66\ \mbox {km}\ \mbox {h}^{-1}$. The authors also report the intensity recorded before the sprint. The cyclist rode at an average power output of
$490 \ \mbox {W}$ in the last 3 min. The data collected over a larger number of sprinters are gathered in the table presented in figure 6(c).
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig6.png?pub-status=live)
Figure 6. (a) Example of final sprint in a road race. Photo credits: T. Vergouwen. (b) Example of power output and speed recorded at the end of a road race. The final sprint is highlighted in grey. Reproduced from Menaspa (Reference Menaspa2015). (c) Characteristics of road sprints in professional competitions; $\textrm {mean} \pm \textrm {standard deviation}$ (range). Reproduced from Menaspa et al. (Reference Menaspa, Quod, Martin, Abbiss and Peiffer2015).
Since the slope of the road $\alpha$ is small for sprints, their dynamics is described by a simplified version of (3.4):
$\textrm {d}/\textrm {d}t(1/2MV^2)+1/2\rho S C_D V^3 = P_m$. This nonlinear equation can be turned into a linear equation in
$V^3$ by replacing the time derivative term
$\textrm {d}/\textrm {d}t(1/2MV^2)$ by its spatial equivalent
$\textrm {d}(1/3MV^3)/\textrm {d}s$
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn10.png?pub-status=live)
where $L_{sprint}=2M/3\rho S C_D$ appears as the characteristic length scale of sprints. According to the data presented in figure 6, before launching the sprint the power is of the order of
$P_{m0}\approx 490\ \mbox {W}$, which leads in the steady limit to the velocity before sprint
$V_0\approx (2P_{m0}/\rho S C_D)^{1/3}$. With
$SC_D\approx 0.25\ \mbox {m}^{2}$ this leads to
$V_0=53\ \mbox {km}\ \mbox {h}^{-1}$. When the sprint is launched the power increases to
$P_{sprint}\approx 1100\ \mbox {W}$ and the maximum velocity which could be reached in steady state is
$V_{sprint}=(2P_{sprint}/\rho S C_D)^{1/3}$. The value of the aerodynamic coefficient in the sprint regular position is
$0.3\ \mbox {m}^{2}$ (Blocken et al. Reference Blocken, van Druenen, Toparlar and Andrianne2019). We thus deduce
$V_{sprint}\approx 66\ \mbox {km}\ \mbox {h}^{-1}$. The exact solution of (3.10) is
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn11.png?pub-status=live)
This exact solution reveals that the acceleration from $V_0$ to
$V_{sprint}$ requires the characteristic length
$L_{sprint}$. With
$M=80\ \mbox {kg}$ and
$SC_D\approx 0.3\ \mbox {m}^{2}$ one deduces that the sprints must start at least
$150\ \mbox {m}$ before the finish line. At an average speed of
$60\ \mbox {km}\ \mbox {h}^{-1}$, this distance is covered over
$9\ \mbox {s}$, which is the characteristic duration of sprints (Menaspa et al. Reference Menaspa, Abbiss and Martin2013). The characteristic velocities
$V_0$ and
$V_{sprint}$ as well as the duration of actual sprints are thus correctly described by (3.10).
3.4. The descent
In a first approximation, we consider that, during descents, cyclists mainly rest ($P_m\approx 0$) and change their position in order to maximize their velocity. Different positions have been tested as illustrated in figure 7 reproduced from the detailed study of Blocken et al. (Reference Blocken, van Druenen, Toparlar and Andrianne2018a). Since the muscle power is null and the regime steady, the characteristic velocity in the descent
$V_{D0}$ results from the balance between the propulsive gravitational power
$Mg(-\alpha )V_{D0}$ and the resistive aerodynamical friction
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn12.png?pub-status=live)
In their study, Blocken et al. (Reference Blocken, van Druenen, Toparlar and Andrianne2018a) considered the descent of C. Froome in stage 8 of Tour de France 2016. This stage ended with the descent of Peyresourde, which is steep with a regular slope ($\alpha =-8\,\%$) and is not characterized by sharp bends. On the day of the descent, the weather conditions were good and the road surface was dry. Near the very end of this stage, just before the top of Peyresourde, C. Froome accelerated and broke away from the group. During part of the descent, he adopted the position shown in figure 7(a) and achieved speeds up to
$90\ \textrm {km}\ \textrm {h}^{-1}$. Since
$M_c=66\ \mbox {kg}$ for Froome, we use
$M=76\ \mbox {kg}$,
$\alpha =-8\,\%$ and
$SC_D=0.233$ in (3.12) to evaluate
$V_{D0}=20.6\ \mbox {m}\ \mbox {s}^{-1}=74\ \mbox {km}\ \mbox {h}^{-1}$ which is smaller than the reported value. The difference is due to the injected power: the ‘Froome’ position is used instead of the ‘superman’ position since it allows for pedalling and C. Froome was indeed pedalling during the descent of Peyresourde (figure 8a).
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig7.png?pub-status=live)
Figure 7. Four different positions used during descents with the corresponding static pressure coefficient $C_P=2(P-P_0)/\rho V_0^2$ on cyclist and bicycle surfaces. Here,
$P$ is the static pressure,
$P_0$ the atmosphéric pressure and
$V_0$ the velocity of the centre of mass. The frontal area
$S$ and the drag area
$SC_D$ are also indicated for four significantly different positions: (a) the Froome position, (b) the Pantani position, (c) top tube 4 and (d) the superman position. This figure is reproduced from Blocken et al. (Reference Blocken, van Druenen, Toparlar and Andrianne2018a).
To quantify the effect of pedalling during descent, one can rewrite (3.4) in the steady state limit of a descent in the form
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn13.png?pub-status=live)
When $P_m=0$ we recover
$V=V_{D0}$ and when
$P_m$ is positive, the velocity increases. This first relationship between the injected power and the velocity is plotted with a blue line in figure 8(b), using
$SC_D=0.233$,
$\rho =1.2\ \mbox {kg}\ \mbox {m}^{-3}$ and
$V_{D0}=20.6\ \mbox {m}\ \mbox {s}^{-1}$. As already discussed, the injected power also depends on the pedalling rate
$\dot {\theta }$ (which is related to the velocity by the relation
$V=R G \dot {\theta }$, where
$R$ is the radius of the wheel and
$G$ is the gear ratio). Typically in mountain stages, professional cyclists have a maximal gear ratio
$G=54/11=4.91$. This second relationship between the injected power and the velocity takes the form
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn14.png?pub-status=live)
In this expression we have used the relationship $P_{max}=2\varPi M_c$ that applies for short efforts after rest (limit of (3.3) when
$T=0$). This equation is presented with a pink solid line in figure 8(b), using
$\varPi =9.7\ \mbox {W}\ \mbox {kg}^{-1}$,
$M_c=66\ \mbox {kg}$,
$G=4.91$,
$R=0.334\ \mbox {m}$ and
$\dot {\theta }_{max}=18.8\ \mbox {rad}\ \mbox {s}$ (which corresponds to
$\dot {\theta }_{max}=180\ \mbox {r.p.m.}$). The first observation is that power can only be used if the maximal pedalling velocity
$RG\dot {\theta }_{max}$ is larger than
$V_{D0}$. This condition imposes a minimal gear ratio
$G_{min}=V_{D0}/R\dot {\theta }_{max}$. In the case of Froome, we get
$G_{min}=3.3$. The typical gear ratio used in mountain stages
$G=54/11=4.91>G_{min}$ ensures that power can be injected during the descent. Once this condition is fulfilled, the effect of the injected power on the velocity is obtained by equating the needed power (3.13) and the injected power (3.14). This balance corresponds to the crossing point of the blue and pink lines in figure 8(b). One reads
$V_{D1}=25.5\ \mbox {m}\ \mbox {s}^{-1}$ which is
$91.8\ \textrm {km}\ \textrm {h}^{-1}$. A value much closer to the one observed in 2016 during the descent of Froome. One also observes in figure 8(b) that there exists a maximal velocity of descent
$V_{Dmax}$ obtained when the injected power is maximal. In the case of Froome in Peyresourde we read
$V_{Dmax}=27.4\ \mbox {m}\ \mbox {s}^{-1}=98.8\ \mbox {km}\ \mbox {h}^{-1}$. In order to achieve this maximal velocity of descent he should use a gear ratio such that
$RG_{max}\dot {\theta }_{max}=2V_{Dmax}$ that is
$G_{max}=8.7$. A huge modification (extra kg during the climb) for a modest gain. One major characteristic of descent is breaking, which is not addressed here but constitutes a perspective of this work.
4. Phase diagram for road cycling
Up to now, the best descender does not have a special jersey. In this section, we thus analyse the other phases identified in § 3 and propose a phase diagram for road cycling.
4.1. What is a climber?
In the peloton, climbers are identified and usually associated with light weight together with a large power to mass ratio (Lucia et al. Reference Lucia, Joyos and Chicharro2000; Lucia, Hoyos & Chicharro Reference Lucia, Hoyos and Chicharro2001) such as Marco Pantani (1.72 m, 57 kg), Alberto Contador (1.76 m, 61 kg), Nairo Quintana (1.67 m, 58 kg), Egan Bernal (1.75 m, 60 kg).
On the physical side, one way to define a climber is to discuss the validity domain of (3.8) for $V_{MT0}$: in the steady regime, (3.8) only holds if the power dissipated by aerodynamical forces can be neglected. Since
$V_{MT0}\propto 1/\alpha$ the smaller the slope the larger the velocity. This implies that (3.8) only holds above a critical slope
$\alpha ^{\star }$ for which the gravitational power request
$Mg\alpha ^{\star }V(\alpha ^{\star })$ exactly balances the power dissipated by the aerodynamical friction
$1/2\rho S C_D V(\alpha ^{\star })^3$ (we neglect solid friction to simplify the discussion). This balance leads to the following expression:
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn15.png?pub-status=live)
This angle separates the flat region ($\alpha <\alpha ^{\star }$) where the aerodynamics dominates gravity from the mountain region (
$\alpha >\alpha ^{\star }$) where gravity dominates. The limit
$\alpha ^{\star }=\infty$ corresponds to
$g=0$ where the mountains do not influence the velocity anymore. The angle
$\alpha ^{\star }$ also depends on the athlete characteristics (
$P_m, M, SC_D$) and one deduces from the zero
$g$ discussion that climbers have a large
$\alpha ^{\star }$.
Equation (4.1) shows that, in order to achieve a large $\alpha ^{\star }$, one needs a large power to mass ratio (first term) but also a small mass (second term), thus recovering what has been reported for climbers by Lucia et al. (Reference Lucia, Joyos and Chicharro2000).
Since the power to mass ratio can be approached by the heuristic equation (3.3), one deduces that, for a climb, which lasts in general $T\approx 30\ \mbox {min}\gg \tau$, the power to mass ratio reduces to
$P_m/M_c=\varPi [1-\ln (T/\tau )^{\gamma }]\approx 0.64\varPi M_c/M$, using
$\gamma =0.0886$ and
$\tau =32\ \mbox {s}$.
If $N$ stands for the number of cyclists of the Tour de France, one can define the climbers as the best
$20\,\%$ of the peloton by a critical angle
$\alpha ^{\star }_{80}$ such that
$80\,\%$ of the peloton has a lower angle
$\alpha ^{\star }$. One can then use a scale of
$\alpha ^{\star }$ as the horizontal axis of the diagram presented in figure 9. The riders with a personal
$\alpha ^{\star }$ larger than
$\alpha ^{\star }_{80}$ are climbers.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig9.png?pub-status=live)
Figure 9. Phase diagram for road cycling. Photo credits: T. Vergouwen/AFP/Presse Sport.
4.2. What is a sprinter?
The first remark about sprinters is that they win lots of stages: the examination of the sprint results in several grand tours (2008–2011) indicates that 79 stages (31 % of 252 total number of stages) were won by only 24 sprinters. Five sprinters won 54 stages of which 1 sprinter won 30 stages (Menaspa et al. Reference Menaspa, Abbiss and Martin2013). Mark Cavendish (70 kg), Peter Sagan (73 kg), Erik Zabel (69 kg) are some emblematic figures of this discipline.
On the physical side, according to (3.10), the best sprinter is the one with the largest peak velocity $V_{sprint}=(2P_{sprint}/\rho S C_D)^{1/3}$. A sprinter is thus characterized by a large absolute power and does not depend on the power to mass ratio. What we know from figure 3(c) is that the maximal power is obtained over a short period corresponding to an anaerobic effort. Since sprints occur at the end of a race that last a few hours, a sprinter must be protected by his team in order to keep his energy for the last hundreds of metres. What we also learn from 3(c) is that the maximal value of the power depends on the cyclist. Always using (3.3), we can evaluate the power
$P_{sprint}$ with
$T=10\ \mbox {s}$ and we find
$P_{sprint}=1.70\varPi M_c$. As we did for climbers, the associated velocity
$V_{sprint}$ can be calculated for all the riders in the peloton in order to evaluate
$V_{sprint}|_{80}$ such that
$80\,\%$ of the peloton has a lower peak velocity. The sprinters can then be defined as the ones who verify:
$V_{sprint}>V_{sprint}|_{80}$. The vertical axis of the diagram presented in figure 9 presents this classification.
4.3. The 3 jerseys
The phase diagram presented in figure 9 is thus composed of two axes, the horizontal one dedicated to climbers and the vertical axis to sprinters. This diagram defines four different regions and we need to discuss the associated physical properties to understand the origin of the three jerseys: to be on the right hand-side of the diagram, a cyclist must have $\alpha ^{\star }>\alpha ^{\star }_{80}$, which implies having a large
$P_m^2/M^3=(P_m/M)^2/M$. In other words, a climber is defined by both a large power to mass ratio
$P_m/M$ and a small mass.
On the other hand, to be on the upper part of the diagram, a cyclist must have a large power $P_{sprint}$ and a small drag area
$SC_D$. Since the power scales with the mass, a large mass is expected to be in the upper part.
The upper-right part is populated with a category of cyclists who have both a large power to mass ratio and who are able to develop a large power. This rather rare combination defines TT specialists and very complete cyclists, which are the qualities recognized for Tour winners.
The phase diagram for road cycling thus has three optimal regions, occupied by three different physics and physiological characteristics and which are associated with three different jerseys: the green for the best sprinter (top left), the polka dot for the best climber (bottom right) and the yellow for the more complete one (top right).
Usually, the three jerseys are for three different cyclists but, depending on the route of the grand tour, one can have some overlap between these different regions. In 2019, the results presented in figure 1 reveal that the three jerseys winners were indeed different in Tour de France and in Giro but, for the Vuelta, the leader Primoz Roglic was also the best sprinter.
Since 1903, over the 106 Tour de France we observe only one exception, in 1969, where Eddy Merckx won the three jerseys (we thank P. Odier for this historical remark).
4.4. Phase diagram for the Tour de France 2017
To construct the phase diagram of Tour de France 2017, one needs to determine $\alpha ^{\star }$ and
$V_{sprint}$ for each cyclist involved in the race. According to the discussions presented in §§ 4.1 and 4.2, one needs to determine the individual value of
$\varPi$. We use the first stage of the Tour 2017, which was a flat time trial with
$D=14\ \mbox {km}$. From the average velocity
$\bar {V}_{TT}$ measured during the race for each rider, we calculate the individual value
$2 \varPi =\rho S C_D \bar {V}_{TT}^3/[M_c (1-\gamma \ln (D/\tau \bar {V}_{TT}))]$. This expression is obtained using (3.5) and (3.3). This value is then used to evaluate the two characteristics
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_eqn16.png?pub-status=live)
The mass $M_c$ and the size
$L_c$ of each cyclist are listed in the Appendix. As we did throughout the article
$S C_D$ is taken constant to
$0.25\ \mbox {m}^{2}$,
$\rho =1.2\ \mbox {kg}\ \mbox {m}^{-3}$ and
$M_b=10\ \mbox {kg}$. From these values, one is able to evaluate
$\alpha ^{\star }$ and
$V_{sprint}$ for the whole peloton.
The cumulative distribution of $\alpha ^{\star }$ is presented in figure 10(a). One observes that
$\alpha ^{\star }$ varies from
$2.5\,\%$ to
$4.2\,\%$ and we extract the value
$\alpha ^{\star }_{80}=3.77\,\%$. Only
$20\,\%$ of the riders have a higher
$\alpha ^{\star }$. The cumulative distribution of
$V_{sprint}$ is presented in figure 10(b). The maximum velocity ranges from 60 to 72 km/h with
$V_{max}|_{80}=68.7\ \mbox {km}\ \mbox {h}^{-1}$. So that only
$20\,\%$ of the riders have a higher
$V_{max}$.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_fig10.png?pub-status=live)
Figure 10. Phase diagram for the Tour de France 2017: (a) determination of $\alpha ^{\star }_{80}$, (b) determination of
$V_{max}|_{80}$, (c) construction of the phase diagram for the Tour 2017: each black square corresponds to a cyclist. The winner C. Froome is indicated with a large yellow square, the green jersey M. Matthews is indicated with a large green square and the polka dot jersey W. Barguil with a large white and red square. The large squares in grey are used for the final top 10.
Using these values, one can thus construct the phase diagram of the Tour 2017 which is presented in figure 10(c): the three jerseys of C. Froome (yellow square), M. Matthews (green square) and R. Bargil (white and red square) stand in the three different regions discussed in § 4.3. We also report, with grey squares, the locations of the riders who finished in the top 10 of the general classification (2-R.Urán, 3-R. Bardet, 4-M. Landa, 5-F. Aru, 6-D. Martin, 7-S. Yates, 8-L. Meintjes, 9-A. Contador, 10-W. Barguil). Clearly they are in the ‘climber’ zone, which underlines the fact that the Tour 2017 had a hilly design: 11 of the 21 stages were either medium mountain SMT (6) or high mountain MT (5).
5. Conclusion and perspectives
In this paper, we first establish the equation of motion of a road cyclist and show that it is able to account for the data measured during Tour de France for the four different ‘disciplines’: time trial, climbing, sprint and descent. Using this equation, we then discuss the physics of the phases with continuous propulsion (time trial, climbing, sprint) and propose a phase diagram for road cycling which allows for the definition of three optimal areas, connected to the three different jerseys. This analysis is applied to the Tour de France 2017 and is shown to be consistent with actual data.
This work on the physics of cycling can be completed in different directions:
(i) We have only discussed individual phases. Collective effects, such as the ones at play in peloton, induce a very stimulating physics which has just started to be considered (Blocken et al. Reference Blocken, van Druenen, Toparlar, Malizia, Mannion, Andrianne, Marchal, Maas and Diepens2018b; Belden et al. Reference Belden, Mansoor, Hellum, Rahman, Meyer, Pease, Pacheco, Koziol and Truscott2019).
(ii) Team strategy is known to have a major effect in the final ranking of a grand tour.
This team strategy, which leads to an optimization of the performance of the leader, is an open field as far as physics is concerned.
(i) We have only considered phases were the cyclist uses his maximal available power. The issue of energy management during a race is completely open.
(ii) The state of the road does not play a major role in our analysis. However, it is known to be important for some special races, such as the Paris–Roubaix, which is famous for rough terrain and cobblestones, or pavé (setts). The terrain has led to the development of specialized frames, wheels and tyres. If one had to adapt the model to analyse Paris–Roubaix, the friction term
$P_f$ should be differently discussed.
(iii) For the descent, we have not discussed the question of breaking associated with turns. If one had to study the evolution of speed in descent, breaking should obviously be considered.
(iv) All the study is conducted assuming that the bikes have gears which allow the rider to keep his optimal physiological pedalling rate. Since there are no gears in track cycling, the model developed only applies to road cycling. A similar study must be conducted for track cycling.
Finally, all sport uncertainties such as motivation, resistance to pressure, wind and weather in general have been neglected in our discussion. We just propose the view of physicists and do not pretend to replace the living side of sport.
Acknowledgements
We first deeply thank S. Dorel, D. Burton, T. Crouch and B. Blocken for allowing us to use some of their work. We also thank P. Odier for his careful reading of the initial manuscript and for all his corrections and meaningful suggestions. They all contributed to improve the overall quality of our work.
Declaration of interests
The authors report no conflict of interest.
Appendix. Riders of the Tour de France 2017
The table below presents the list of the riders of the Tour de France 2017 in alphabetic order. For each of them we indicate their team, their age, height $L_c$ and mass
$M_c$ (reproduced from the website https://www.google.fr/amp/s/todaycycling.com/tour-de-france-2017-presentation-coureurs-age-poids-taille/amp/). Their average velocity
$\bar {V}_{TT}$ during the first stage of the Tour 2017, which was a flat time trial run over a distance of 14 km in the streets of the city of Düsseldorf, is then given. This velocity is then used in § 4.4 to construct the phase diagram presented in figure 10.
![](https://static.cambridge.org/binary/version/id/urn:cambridge.org:id:binary:20210305173310975-0405:S0022112020010228:S0022112020010228_tab3.png?pub-status=live)