Hostname: page-component-7479d7b7d-jwnkl Total loading time: 0 Render date: 2024-07-13T22:30:48.638Z Has data issue: false hasContentIssue false
  • English
  • Français

The structure of a separating turbulent boundary layer. Part 3. Transverse velocity measurements

Published online by Cambridge University Press:  20 April 2006

K. Shiloh ,
B. G. Shivaprasad  and
R. L. Simpson
K. Shiloh
Affiliation:
Southern Methodist University, Dallas, Texas 75275 Permanent address: Israel Atomic Energy Commission, Soreq Nuclear Research Center, Yavne, Israel 70600.
B. G. Shivaprasad
Affiliation:
Southern Methodist University, Dallas, Texas 75275
R. L. Simpson
Affiliation:
Southern Methodist University, Dallas, Texas 75275
Get access Rights & Permissions [Opens in a new window]

Abstract

Simpson, Chew & Shivaprasad (1981a, b) describe many experimentally determined features of a separating turbulent boundary layer. For the same flow, experimental results for the transverse velocity component are presented here. A specially designed directionally sensitive laser anemometer was constructed and used to make measurements in the separated region. Cross-wire hot-wire anemometer measurements were obtained upstream of separation and in the outer region of the separated flow and are in good agreement with the laser anemometer results.

It was found that w’2 = v’2 in the outer 90% of the shear layer both upstream and downstream of separation. Features of w’2 profiles in the backflow are related to features of the streamwise velocity component. This behaviour is consistent with the large-scale-structures flow model of a separating boundary layer presented by Simpson et al. (1981a, b).

Large-scale structures supply the mean streamwise backflow. These large-scale structures also transport the turbulence energy to the backflow from the outer flow by turbulent diffusion since advection and production of turbulence kinetic energy are negligible there compared with the dissipation rate. Because of continuity requirements fluid motions toward the wall must be deflected and contribute to streamwise and transverse motions near the wall.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 113 , December 1981 , pp. 75 - 90
Copyright
© 1981 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bradshaw, P. 1967 J. Fluid Mech. 29, 625–645.
Bragg, G. M. 1974 Principles of Experimentation and Measurement. Prentice-Hall.
Collins, M. A. & Simpson, R. L. 1978 A.I.A.A. J. 16, 291–292.
East, L. F. & Sawyer, W. G. 1979 Proc. NATO-AGARD Fluid Dynamics Symp.
Echols, W. H. & Young, J. A. 1963 Naval Res. Lab. Rep. no. 5929.
Kline, S. J. & McClintock, F. A. 1953 Mech. Engng 75, 3–8.
Kreid, D. K. & Grams, G. W. 1976 Applied Optics 15, 14–16.
Orloff, K. L. & Logan, S. E. 1973 Applied Optics 12, 2477–2481.
Rotta, J. C. 1962 Prog. Aero. Sci. 2, 1–219.
Sandborn, V. A. & Slogar, R. J. 1955 N.A.C.A. Tech. Note 3264.
Schubauer, G. F. & Klebanoff, P. S. 1950 N.A.C.A. Tech. Note 2133.
Shiloh, K., Shivaprasad, B. G. & Simpson, R. L. 1980 Project SQUID Rep. SMU-5-PU. (To appear as DTIC or NTIS Report.)
Simpson, R. L. & Barr, P. W. 1975 Rev. Sci. Instrum. 46, 835–837.
Simpson, R. L. & Chew, Y.-T. 1979 Laser Velocimetry and Particle Sizing (ed. H. D. Thompson & W. H. Stevenson), pp. 179–196. Hemisphere.
Simpson, R. L., Chew, Y.-T. & Shivaprasad, B. G. 1980 Project SQUID Rep. 5MU-4-PU. (To appear as DTIC or NTIS Report).
Simpson, R. L., Chew, Y.-T. & Shivaprasad, B. G. 1981a J. Fluid Mech. 113, 23–51.
Simpson, R. L., Chew, Y.-T. & Shivaprasad, B. G. 1981b J. Fluid Mech. 113, 53–73.
Simpson, R. L. & Collins, M. A. 1978 A.I.A.A. J. 16, 289–290.
Simpson, R. L., Strickland, J. H. & Barr, P. W. 1977 J. Fluid Mech. 79, 553–594.
Strickland, J. H. & Simpson, R. L. 1973 Rep. WT-2, Thermal and Fluid Sciences Center, Southern Methodist Univ. Rep. WT-2; also AD-771170/8GA.
Wygnanski, I. & Fiedler, H. E. 1970 J. Fluid Mech. 41, 327–361.