Spreading and stationary droplets of a thermally responsive fluid on a heated surface are studied. The fluid undergoes a reversible gel formation at elevated temperature. The spatio-temporal pattern of gel formation within the droplet is examined using an experimental method based on spectral domain optical coherence tomography and time varying speckle patterns. Two stages of gel formation can be distinguished: first, a thin crust appears starting at the contact line. Second, a gel layer appears above the heated plate and then expands upward. We attribute the first stage of gel formation to solvent evaporation and heating through the air and the second to thermal conduction through the fluid from the base. Gel formation at the contact line is likely responsible for the arrest of spreading droplets, but was not detectable with our experimental protocol at the time of contact line arrest, suggesting that this arose over a microscopic length scale. Overall, substrate heating provides an effective way to control the final shape of droplets of thermo-responsive fluids.

Capillary ripples in thin viscous films are important features of coating and lubrication flows. Here, we present experiments based on digital holographic microscopy, measuring with nanoscale resolution the morphology of capillary ripples ahead of a viscous drop spreading on a prewetted surface. Our experiments reveal that upon increasing the spreading velocity, the amplitude of the ripples first increases and subsequently decreases. Above a critical spreading velocity, the ripples even disappear completely and this transition is accompanied by a divergence of the ripple wavelength. These observations are explained quantitatively using linear wave analysis, beyond the usual lubrication approximation, illustrating that new phenomena arise when the capillary number becomes of the order of unity.

Laser-induced forward transfer (LIFT) is a nozzle-free printing technology that can be used for two- and three-dimensional printing. In LIFT, a laser pulse creates an impulse inside a thin film of material that results in the formation of a liquid jet. We experimentally study LIFT of viscoplastic materials by visualizing the process of jetting with high-speed imaging. The shape of the jet depends on the laser energy, focal height, surface tension and material rheology. We theoretically identify the characteristic jetting velocity and how it depends on the control parameters, and define non-dimensional groups to classify the regimes of jetting. Based on the results, we propose the optimal conditions for printing with LIFT technology.

The impact of viscoplastic droplets on a free surface of water is studied. The droplet undergoes an elasto-plastic deformation at the early stages of water entry. At large time, the yield stress dominates; therefore, the droplet solidifies and reaches an equilibrium shape. Depending on the impact velocity and the rheology of the droplet, the final morphologies vary from pear-shaped to capsules that contain bubbles. We perform an analysis of the orders of magnitude of the forces and introduce the relevant dimensionless groups. Furthermore, we categorize the final shapes in a phase diagram and analyse their geometrical properties. The process presents a method of making non-spherical beads and capsules with tunable shapes and provides information on the general problem of the impact of highly deformable objects on a liquid surface.