Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Hongqin Wang
Fengjiang Wang
Xin Ma
Jun Liu
and
Yiyu Qian
2005.
Study on reactive wetting of Sn0.7Cu-xZn lead-free solders on Cu substrate.
p.
1.
Lee, Joo Won
Lee, Zin Hyoung
and
Lee, Hyuck Mo
2005.
Formation of Intermetallic Compounds in the Ni Bearing Lead Free Composite Solders.
MATERIALS TRANSACTIONS,
Vol. 46,
Issue. 11,
p.
2344.
Chang, Tao-Chih
Wang, Jian-Wen
Wang, Moo-Chin
and
Hon, Min-Hsiung
2006.
Solderability of Sn–9Zn–0.5Ag–1In lead-free solder on Cu substrate.
Journal of Alloys and Compounds,
Vol. 422,
Issue. 1-2,
p.
239.
Wang, Hongqin
Gao, Feng
Ma, Xin
and
Qian, Yiyu
2006.
Reactive wetting of solders on Cu and Cu6Sn5/Cu3Sn/Cu substrates using wetting balance.
Scripta Materialia,
Vol. 55,
Issue. 9,
p.
823.
Huang, Yu-chih
Chen, Sinn-wen
Gierlotka, Wojcieh
Chang, Chia-hua
and
Wu, Jen-chin
2007.
Dissolution and interfacial reactions of Fe in molten Sn-Cu and Sn-Pb solders.
Journal of Materials Research,
Vol. 22,
Issue. 10,
p.
2924.
Wang, Hongqin
Wang, Fengjiang
Gao, Feng
Ma, Xin
and
Qian, Yiyu
2007.
Reactive wetting of Sn0.7Cu–xZn lead-free solders on Cu substrate.
Journal of Alloys and Compounds,
Vol. 433,
Issue. 1-2,
p.
302.
Jin Kim, Mi
Zhou, Y. (Norman)
and
Pil Jung, Jae
2007.
Reduced temperature soldering of capacitors using Sn‐Bi plated Sn‐3.5%Ag.
Soldering & Surface Mount Technology,
Vol. 19,
Issue. 3,
p.
3.
Matsumoto, T.
and
Nogi, K.
2008.
Wetting in Soldering and Microelectronics.
Annual Review of Materials Research,
Vol. 38,
Issue. 1,
p.
251.
Wang, Hongqin
Zhao, Hui
Sekulic, Dusan P.
and
Qian, Yiyu
2008.
A Comparative Study of Reactive Wetting of Lead and Lead-Free Solders on Cu and (Cu6Sn5/Cu3Sn)/Cu Substrates.
Journal of Electronic Materials,
Vol. 37,
Issue. 10,
p.
1640.
Zhao, Hui
Nalagatla, Dinesh Reddy
and
Sekulic, Dusan P.
2009.
Wetting Kinetics of Eutectic Lead and Lead-Free Solders: Spreading over the Cu Surface.
Journal of Electronic Materials,
Vol. 38,
Issue. 2,
p.
284.
Yang, S.C.
Chang, W.C.
Wang, Y.W.
and
Kao, C.R.
2009.
Interfacial Reaction and Wetting Behavior Between Pt and Molten Solder.
Journal of Electronic Materials,
Vol. 38,
Issue. 1,
p.
25.
Shen, J.
and
Chan, Y.C.
2009.
Effect of metal/ceramic nanoparticle-doped fluxes on the wettability between Sn–Ag–Cu solder and a Cu layer.
Journal of Alloys and Compounds,
Vol. 477,
Issue. 1-2,
p.
909.
Martorano, K.M.
Martorano, M.A.
and
Brandi, S.D.
2009.
Optimal conditions for the wetting balance test.
Journal of Materials Processing Technology,
Vol. 209,
Issue. 6,
p.
3089.
Chen, Yue-ting
Chan, Ya-ting
and
Chen, Chih-chi
2010.
Wettability and interfacial reactions between the molten Sn–3.0 wt%Ag–0.5 wt%Cu solder (SAC305) and Ni–Co alloys.
Journal of Alloys and Compounds,
Vol. 507,
Issue. 2,
p.
419.
Alibeigi, S.
Kavitha, R.
Meguerian, R.J.
and
McDermid, J.R.
2011.
Reactive wetting of high Mn steels during continuous hot-dip galvanizing.
Acta Materialia,
Vol. 59,
Issue. 9,
p.
3537.
Satyanarayan
and
Prabhu, K.N.
2011.
Reactive wetting, evolution of interfacial and bulk IMCs and their effect on mechanical properties of eutectic Sn–Cu solder alloy.
Advances in Colloid and Interface Science,
Vol. 166,
Issue. 1-2,
p.
87.
Zeng, Guang
Xue, Songbai
Zhang, Liang
and
Gao, Lili
2011.
Recent advances on Sn–Cu solders with alloying elements: review.
Journal of Materials Science: Materials in Electronics,
Vol. 22,
Issue. 6,
p.
565.
Fu, Chun-Chong
and
Chen, Chih-chi
2011.
Investigations of wetting properties of Ni–V and Ni–Co alloys by Sn, Sn–Pb, Sn–Cu, and Sn–Ag–Cu solders.
Journal of the Taiwan Institute of Chemical Engineers,
Vol. 42,
Issue. 2,
p.
350.
Hu, Jing
Luo, Tingbi
Hu, Anmin
Li, Ming
and
Mao, Dali
2011.
Electrochemical Corrosion Behaviors of Sn-9Zn-3Bi-xCr Solder in 3.5% NaCl Solution.
Journal of Electronic Materials,
Vol. 40,
Issue. 7,
p.
1556.
Garnier, Arnaud
Baillin, Xavier
and
Hodaj, Fiqiri
2013.
Solidification and interfacial interactions in gold–tin system during eutectic or thermo-compression bonding for 200 mm MEMS wafer level hermetic packaging.
Journal of Materials Science: Materials in Electronics,
Vol. 24,
Issue. 12,
p.
5000.