Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Zhu, F.
Tian, H. N.
Li, X.
Cao, G. H.
Gerthsen, D.
Oertel, C.-G.
and
Skrotzki, W.
2011.
Formation mechanism of shear bands in ultrafine lamellar Ti–Fe eutectics.
Applied Physics Letters,
Vol. 98,
Issue. 8,
Ma, Jiqiang
Yang, Jun
Bi, Qinling
Fu, Licai
Kang, Yonghai
and
Liu, Weimin
2011.
Combustion Synthesis of Large Bulk Nanostructured Ni65Al21Cr14Alloy.
Journal of Nanomaterials,
Vol. 2011,
Issue. ,
p.
1.
Cheng, Kuiyu
Lu, Cheng
Tieu, Kiet
Zhang, Laichang
and
Sun, Yong
2012.
Supplemental Proceedings.
p.
971.
Zhang, Lai-Chang
2012.
High performance ultrafine-grained Ti-Fe-based alloys with multiple length-scale phases.
Advances in materials Research,
Vol. 1,
Issue. 1,
p.
13.
Maity, T.
and
Das, J.
2012.
Origin of plasticity in ultrafine lamellar Ti-Fe-(Sn) composites.
AIP Advances,
Vol. 2,
Issue. 3,
Sohn, S.W.
Park, J.M.
Kim, W.T.
and
Kim, D.H.
2012.
Microalloying effect on the microstructure and mechanical properties in Al–Cu based dendrite-ultrafine composites.
Journal of Alloys and Compounds,
Vol. 541,
Issue. ,
p.
14.
Das, J.
and
Maity, T.
2012.
A Few Aspects on the Processing and Deformation Behavior of Advanced Eutectic Alloys.
Transactions of the Indian Institute of Metals,
Vol. 65,
Issue. 6,
p.
571.
Cao, G.H.
Peng, Y.F.
Liu, N.
Li, X.
Lei, Z.S.
Ren, Z.M.
Gerthsen, D.
and
Russell, A.M.
2014.
Formation of a bimodal structure in ultrafine Ti–Fe–Nb alloys with high-strength and enhanced ductility.
Materials Science and Engineering: A,
Vol. 609,
Issue. ,
p.
60.
Maity, T.
and
Das, J.
2014.
Microstructure and size effect in ultrafine (Ti0.705Fe0.295)100−xSnx (0⩽x⩽4at.%) composites.
Journal of Alloys and Compounds,
Vol. 585,
Issue. ,
p.
54.
Maity, T.
and
Das, J.
2015.
High strength Ni–Zr–(Al) nanoeutectic composites with large plasticity.
Intermetallics,
Vol. 63,
Issue. ,
p.
51.
Maity, T.
Roy, B.
and
Das, J.
2015.
Mechanism of lamellae deformation and phase rearrangement in ultrafine β-Ti/FeTi eutectic composites.
Acta Materialia,
Vol. 97,
Issue. ,
p.
170.
Das, J.
Maity, T.
and
Singh, A.
2015.
Nanoeutectic Composites: Processing, Microstructure and Properties.
Transactions of the Indian Institute of Metals,
Vol. 68,
Issue. 6,
p.
1199.
Knowles, A.J.
Jones, N.G.
Messé, O.M.D.M.
Barnard, J.S.
Jones, C.N.
and
Stone, H.J.
2016.
Phase equilibria in the Fe-Mo-Ti ternary system at 1000 °C.
International Journal of Refractory Metals and Hard Materials,
Vol. 60,
Issue. ,
p.
160.
Maity, T.
Singh, A.
Dutta, A.
and
Das, J.
2016.
Microscopic mechanism on the evolution of plasticity in nanolamellar γ-Ni/Ni5Zr eutectic composites.
Materials Science and Engineering: A,
Vol. 666,
Issue. ,
p.
72.
Knowles, A.J.
Jones, N.G.
Jones, C.N.
and
Stone, H.J.
2016.
Proceedings of the 13th World Conference on Titanium.
p.
1229.
Chen, Tao-Hsing
and
Hsu, Yu-Kai
2016.
Mechanical properties and microstructural of biomedical Ti-based bulk metallic glass with Sn addition.
Computational Materials Science,
Vol. 117,
Issue. ,
p.
584.
Knowles, A. J.
Jones, N. G.
Jones, C. N.
and
Stone, H. J.
2017.
Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C).
Metallurgical and Materials Transactions A,
Vol. 48,
Issue. 9,
p.
4334.
Dutta, Anushree
Jana, Parijat P.
and
Das, Jayanta
2019.
Effect of cooling rate and composition on the microstructure and mechanical properties of (Ni0.92Zr0.08)100−xAlx (0 ≤ x ≤ 4 at.%) ultrafine eutectic composites.
Journal of Materials Research,
Vol. 34,
Issue. 10,
p.
1704.
Hsu, Kuo-Chin
Chen, Tao-Hsing
Fang, Te-Hua
and
Hsu, Yu-Kai
2020.
Mechanical Property and Fracture Characteristic of Ti–Cu–Ni–Al<sub>x</sub> Bulk Metallic Glasses under Different Strain Rates.
MATERIALS TRANSACTIONS,
Vol. 61,
Issue. 8,
p.
1607.
Chanda, Barnasree
Potnis, Gaurav
Jana, Parijat P.
and
Das, Jayanta
2020.
A review on nano-/ultrafine advanced eutectic alloys.
Journal of Alloys and Compounds,
Vol. 827,
Issue. ,
p.
154226.