Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-22T14:28:10.887Z Has data issue: false hasContentIssue false
  • English
  • Français

Formation and mechanical properties of Cu–Hf–Al bulk glassy alloys with a large supercooled liquid region of over 90 K

Published online by Cambridge University Press:  31 January 2011

Akihisa Inoue  and
Wei Zhang
Akihisa Inoue
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980–8577, Japan
Wei Zhang
Affiliation:
Japan Science and Technology Corporation, Sendai 982–0807, Japan
Get access

Abstract

New Cu-based bulk glassy alloys with large supercooled liquid regions and high mechanical strength were formed in Cu–Hf–Al ternary systems. The large supercooled liquid region exceeding 70 K was obtained in the composition range of 40 at.% Hf at 2.5% Al, 37.5–50% Hf at 5% Al, and 45% Hf at 7.5% Al. The largest supercooled liquid region ΔTx(= Tx – Tg) was 91 K for Cu50Hf45Al5 alloy, and the highest reduced glass-transition temperature was 0.63 for Cu50Hf42.5Al7.5 and Cu52.5Hf40Al7.5 alloys. The alloys with large ΔTx values above 50 K were formed into bulk glassy rods with diameters up to 3 mm by copper mold casting, and the glassy alloy rods exhibited high compressive fracture strength of 2260 to 2370 MPa and Young's modulus of 121 to 128 GPa combined with elastic elongation of 1.9% to 2.0% and plastic elongation of 0.2% to 0.6%. No bulk glassy alloys were formed in the Cu–Hf binary system by copper mold casting, and, hence, the addition of 2.5% to 7.5% Al to Cu–Hf alloys was very effective for increasing glass-forming ability as well as the stabilization of supercooled liquid. The effectiveness can be interpreted on the basis of the concept of the formation of a unique glassy structure in special multicomponent alloys with the three component rules.

Type
Articles
Information
Journal of Materials Research , Volume 18 , Issue 6 , June 2003 , pp. 1435 - 1440
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Inoue, A., Ohtera, K., Kita, K., and Masumoto, T., Jpn. J. Appl. Phys. 27, L2248 (1988).CrossRefGoogle Scholar
2.Inoue, A., Zhang, T., and Masumoto, T., Mater. Trans. JIM 30, 965 (1989).CrossRefGoogle Scholar
3.Inoue, A., Zhang, T., and Masumoto, T., Mater. Trans. JIM 31, 425 (1990).CrossRefGoogle Scholar
4.Inoue, A., Amiya, K., Yoshii, I., Nishiyama, N., and Masumoto, T., Mater. Trans. Res. Soc. Jpn. 16A, 131 (1993).Google Scholar
5.Peker, A. and Johnson, W.L., Appl. Phys. Lett. 63, 2342 (1993).CrossRefGoogle Scholar
6.Inoue, A., Shibata, T., and Zhang, T., Mater. Trans. JIM 36, 1420 (1995).CrossRefGoogle Scholar
7.Gu, X., Xing, L., and Hufnagel, T.C., in Supercooled Liquid, Bulk Glassy and Nanocrystalline States of Alloys, edited by Inoue, A., Yavari, A.R., Johnson, W.L., and Dauskardt, R.H. (Mater. Res. Soc. Symp. Proc. 644, Warrendale, PA, 2001), p. L12.16.Google Scholar
8.Inoue, A. and Gook, G.S., Mater. Trans. JIM 36, 1180 (1995).CrossRefGoogle Scholar
9.Inoue, A., Zhang, T., and Takeuchi, A., Appl. Phys. Lett. 71, 464 (1997).CrossRefGoogle Scholar
10.Itoi, T. and Inoue, A., Mater. Trans. JIM 41, 1256 (1999).CrossRefGoogle Scholar
11.Lin, X.H. and Johnson, W.L., J. Appl. Phys. 78, 5614 (1995).Google Scholar
12.Inoue, A., Nishiyama, N., and Matsuda, T., Mater. Trans. JIM 37, 181 (1996).CrossRefGoogle Scholar
13.Inoue, A., Zhang, W., Zhang, T., and Kurosaka, K., Acta Mater. 49, 2645 (2001).CrossRefGoogle Scholar
14.Yi, S., Park, T.G., and Kim, D.H., J. Mater. Res. 15, 2425 (2000).CrossRefGoogle Scholar
15.Inoue, A., Zhang, W., and Zhang, T., Mater. Trans. 43, 1952 (2002).CrossRefGoogle Scholar
16.Amiya, K. and Inoue, A., Mater. Trans. 43, 81 (2002).CrossRefGoogle Scholar
17.Inoue, A., Nishiyama, N., and Kimura, H., Mater. Trans. JIM 38, 179 (1997).CrossRefGoogle Scholar
18.Inoue, A. and Zhang, T., Mater. Trans. JIM 37, 185 (1996).CrossRefGoogle Scholar
19.Amiya, K. and Inoue, A., Mater. Trans. 42, 543 (2001).CrossRefGoogle Scholar
20.Zhang, T. and Inoue, A., Mater. Trans. JIM 39, 1001 (1998).CrossRefGoogle Scholar
21.Inoue, A., Zhang, W., Zhang, T., and Kurosaka, K., J. Mater. Res. 16, 2836 (2001).CrossRefGoogle Scholar
22.Inoue, A., Zhang, T., Kurosaka, K., and Zhang, W., Mater. Trans. 42, 1800 (2001).CrossRefGoogle Scholar
23.Zhang, T. and Inoue, A., Mater. Trans. 43, 708 (2001).CrossRefGoogle Scholar
24.Inoue, A., Mater. Trans. JIM 36, 866 (1995).CrossRefGoogle Scholar
25.Johnson, W.L., MRS Bull. 24(10), 42 (1999).CrossRefGoogle Scholar
26.Bruck, H.A., Christman, T., Rosakis, A. J., and Johnson, W.L., Scripta Metall. 30, 429 (1994).CrossRefGoogle Scholar
27.Metals Databook, edited by Japan Inst. Metals (Maruzen, Tokyo, 1983), p. 8.Google Scholar
28.Niessen, F.R., Cohesion in Metals (Elsevier Science Publishers, Amsterdam, The Netherlands, 1988), p. 224.Google Scholar
29.Chen, H.S., Rep. Prog. Phys. 43, 353 (1980).CrossRefGoogle Scholar