Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Rao, D.
Heerens, J.
Alves Pinheiro, G.
dos Santos, J.F.
and
Huber, N.
2010.
On characterisation of local stress–strain properties in friction stir welded aluminium AA 5083 sheets using micro-tensile specimen testing and instrumented indentation technique.
Materials Science and Engineering: A,
Vol. 527,
Issue. 18-19,
p.
5018.
Kamran, Yasir
and
Larsson, Per-Lennart
2011.
Second-order effects at microindentation of elastic polymers using sharp indenters.
Materials & Design,
Vol. 32,
Issue. 6,
p.
3645.
Larsson, Per-Lennart
2011.
On the mechanical behavior at sharp indentation of materials with compressive residual stresses.
Materials & Design,
Vol. 32,
Issue. 3,
p.
1427.
Rydin, Andreas
and
Larsson, Per-Lennart
2012.
On the Correlation Between Residual Stresses and Global Indentation Quantities: Equi-Biaxial Stress Field.
Tribology Letters,
Vol. 47,
Issue. 1,
p.
31.
Cornec, Alfred
Kabir, Mohammad Rizviul
and
Huber, Norbert
2012.
Use of spherical indentation technique for measurement of property variations of γTiAl.
Journal of Materials Research,
Vol. 27,
Issue. 1,
p.
378.
Larsson, Per-Lennart
and
Blanchard, Pierre
2012.
On the correlation between residual stresses and global indentation quantities: Numerical results for general biaxial stress fields.
Materials & Design,
Vol. 37,
Issue. ,
p.
435.
Larsson, Per-Lennart
and
Blanchard, Pierre
2013.
On the invariance of hardness at sharp indention of materials with general biaxial residual stress fields.
Materials & Design (1980-2015),
Vol. 52,
Issue. ,
p.
602.
Rao, D.
Huber, K.
Heerens, J.
dos Santos, J.F.
and
Huber, N.
2013.
Asymmetric mechanical properties and tensile behaviour prediction of aluminium alloy 5083 friction stir welding joints.
Materials Science and Engineering: A,
Vol. 565,
Issue. ,
p.
44.
Xiao, Xudong
Wang, Yongjun
Zhang, Wei
Wang, Junbiao
and
Wei, Shengmin
2014.
Numerical Simulation of Stress Peen Forming with Regular Indentation.
Procedia Engineering,
Vol. 81,
Issue. ,
p.
867.
Larsson, Per-Lennart
2014.
On the Determination of Biaxial Residual Stress Fields from Global Indentation Quantities.
Tribology Letters,
Vol. 54,
Issue. 1,
p.
89.
Larsson, P‐L.
2017.
Applied Nanoindentation in Advanced Materials.
p.
1.
Bock, Frederic E.
Aydin, Roland C.
Cyron, Christian J.
Huber, Norbert
Kalidindi, Surya R.
and
Klusemann, Benjamin
2019.
A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics.
Frontiers in Materials,
Vol. 6,
Issue. ,
Xiao, Xudong
Sun, Yao
Tong, Xin
Li, Yan
and
Gao, Guoqiang
2019.
Prediction of peen forming stress and plate deformation with a combined method.
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
Vol. 233,
Issue. 14,
p.
2492.
Moharrami, R.
and
Sanayei, M.
2020.
Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels.
Precision Engineering,
Vol. 64,
Issue. ,
p.
220.
Moharrami, Rasoul
and
Sanayei, Mahsa
2020.
Numerical study of the effect of yield strain and stress ratio on the measurement accuracy of biaxial residual stress in steels using indentation.
Journal of Materials Research and Technology,
Vol. 9,
Issue. 3,
p.
3950.
Terentyev, Egor V.
Marchenkov, Artem Yu.
and
Borodavkina, Ksenia T.
2021.
Influence of Residual Stresses on the Weld Metal Hardness of 5V Titanium Alloy.
Defect and Diffusion Forum,
Vol. 410,
Issue. ,
p.
359.
Gairola, Saurabh
Rengaswamy, Jayaganthan
and
Verma, Raviraj
2023.
A study on XFEM simulation of tensile, fracture toughness, and fatigue crack growth behavior of Al 2024 alloy through fatigue crack growth rate models using genetic algorithm.
Fatigue & Fracture of Engineering Materials & Structures,
Vol. 46,
Issue. 6,
p.
2121.
Corallo, L.
Mirone, G.
and
Verleysen, P.
2023.
A Novel High-Speed Bulge Test to Identify the Large Deformation Behavior of Sheet Metals.
Experimental Mechanics,
Vol. 63,
Issue. 4,
p.
593.