Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Thimont, Yohann
and
LeBlanc, Saniya
2019.
The impact of thermoelectric leg geometries on thermal resistance and power output.
Journal of Applied Physics,
Vol. 126,
Issue. 9,
Greifzu, Moritz
Tkachov, Roman
Stepien, Lukas
López, Elena
Brückner, Frank
and
Leyens, Christoph
2019.
Laser Treatment as Sintering Process for Dispenser Printed Bismuth Telluride Based Paste.
Materials,
Vol. 12,
Issue. 20,
p.
3453.
Simmons, Jacob C.
Chen, Xiaobo
Azizi, Arad
Daeumer, Matthias A.
Zavalij, Peter Y.
Zhou, Guangwen
and
Schiffres, Scott N.
2020.
Influence of processing and microstructure on the local and bulk thermal conductivity of selective laser melted 316L stainless steel.
Additive Manufacturing,
Vol. 32,
Issue. ,
p.
100996.
Molina-Lopez, Francisco
2020.
Emerging Thermoelectric Generators Based on Printed and Flexible Electronics Technology.
p.
1.
Kenel, C.
Al Malki, M.M.F.
and
Dunand, D.C.
2021.
Microstructure evolution during reduction and sintering of 3D-extrusion-printed Bi2O3+TeO2 inks to form Bi2Te3.
Acta Materialia,
Vol. 221,
Issue. ,
p.
117422.
Singh, Ranber
2021.
Thermoelectricity and Advanced Thermoelectric Materials.
p.
313.
Welch, Ryan
Hobbis, Dean
Birnbaum, Andrew J.
Nolas, George
and
LeBlanc, Saniya
2021.
Nano‐ and Micro‐Structures Formed during Laser Processing of Selenium Doped Bismuth Telluride.
Advanced Materials Interfaces,
Vol. 8,
Issue. 15,
Tian, Yuan
and
Molina-Lopez, Francisco
2021.
Boosting the performance of printed thermoelectric materials by inducing morphological anisotropy.
Nanoscale,
Vol. 13,
Issue. 10,
p.
5202.
Cramer, Corson L.
Ionescu, Emanuel
Graczyk-Zajac, Magdalena
Nelson, Andrew T.
Katoh, Yutai
Haslam, Jeffery J.
Wondraczek, Lothar
Aguirre, Trevor G.
LeBlanc, Saniya
Wang, Hsin
Masoudi, Mansour
Tegeler, Ed
Riedel, Ralf
Colombo, Paolo
and
Minary-Jolandan, Majid
2022.
Additive manufacturing of ceramic materials for energy applications: Road map and opportunities.
Journal of the European Ceramic Society,
Vol. 42,
Issue. 7,
p.
3049.
Neeleshwar, S.
Saini, Anjali
Bairwa, Mukesh Kumar
Bisht, Neeta
Katre, Ankita
and
Narsinga Rao, G.
2022.
Nanomaterials for Innovative Energy Systems and Devices.
p.
103.
Elmoughni, Hend M.
Atalay, Ozgur
Ozlem, Kadir
and
Menon, Akanksha K.
2022.
Thermoelectric Clothing for Body Heat Harvesting and Personal Cooling: Design and Fabrication of a Textile‐Integrated Flexible and Vertical Device.
Energy Technology,
Vol. 10,
Issue. 10,
Gomell, Leonie
Tsai, Shao-Pu
Roscher, Moritz
Bueno Villoro, Ruben
Konijnenberg, Peter
Zaefferer, Stefan
Scheu, Christina
and
Gault, Baptiste
2022.
In situ
nitriding of
Fe2VAl
during laser surface remelting to manipulate microstructure and crystalline defects.
Physical Review Materials,
Vol. 6,
Issue. 8,
Zhang, Haidong
and
LeBlanc, Saniya
2022.
Laser Additive Manufacturing Process Development for Bismuth Telluride Thermoelectric Material.
Journal of Materials Engineering and Performance,
Vol. 31,
Issue. 8,
p.
6196.
Zhang, Qihao
Deng, Kangfa
Wilkens, Lennart
Reith, Heiko
and
Nielsch, Kornelius
2022.
Micro-thermoelectric devices.
Nature Electronics,
Vol. 5,
Issue. 6,
p.
333.
Stotzer, Victoria J. P.
Apel, Christian
Paz y Puente, Ashley E.
and
Watzman, Sarah J.
2022.
Thermoelectric transport in bulk Ni fabricated via particle-based ink extrusion additive manufacturing.
MRS Communications,
Vol. 12,
Issue. 5,
p.
609.
Mostafaei, Amir
Zhao, Cang
He, Yining
Reza Ghiaasiaan, Seyed
Shi, Bo
Shao, Shuai
Shamsaei, Nima
Wu, Ziheng
Kouraytem, Nadia
Sun, Tao
Pauza, Joseph
Gordon, Jerard V.
Webler, Bryan
Parab, Niranjan D.
Asherloo, Mohammadreza
Guo, Qilin
Chen, Lianyi
and
Rollett, Anthony D.
2022.
Defects and anomalies in powder bed fusion metal additive manufacturing.
Current Opinion in Solid State and Materials Science,
Vol. 26,
Issue. 2,
p.
100974.
Oztan, Cagri
Welch, Ryan
and
LeBlanc, Saniya
2022.
Additive Manufacturing of Bulk Thermoelectric Architectures: A Review.
Energies,
Vol. 15,
Issue. 9,
p.
3121.
Oztan, Cagri
Şişik, Bengisu
Welch, Ryan
and
LeBlanc, Saniya
2022.
Process-microstructure relationship of laser processed thermoelectric material Bi2Te3.
Frontiers in Electronic Materials,
Vol. 2,
Issue. ,
Baudry, Maxime
Savelli, Guillaume
and
Roux, Guilhem
2023.
3D printing of bulk thermoelectric materials: Laser powder bed fusion of N-type silicon germanium.
Materials Science and Engineering: B,
Vol. 298,
Issue. ,
p.
116897.
Rangarajan, Srikanth
Schiffres, Scott N.
and
Sammakia, Bahgat
2023.
A Review of Recent Developments in “On-Chip” Embedded Cooling Technologies for Heterogeneous Integrated Applications.
Engineering,
Vol. 26,
Issue. ,
p.
185.