Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Sugioka, Koji
Tashiro, Hideo
Toyoda, Koichi
Murakami, Hideyuki
and
Takai, Hiroshi
1990.
Improvement of resistance to corrosion of stainless steel 304 in acid solutions by simultaneous deposition with doping of Si using KrF excimer laser.
Journal of Materials Research,
Vol. 5,
Issue. 12,
p.
2835.
Zabinski, J. S.
Donley, M. S.
John, P. J.
Dyhouse, V. J.
Safriet, A. J.
and
McDevitt, N. T.
1990.
Crystallization of Molybdenum Disulfide Films Deposited by Pulsed Laser Ablation.
MRS Proceedings,
Vol. 201,
Issue. ,
LINCE, JEFFREY R.
HILTON, MICHAEL R.
and
BOMMANNAVAR, ARUN S.
1990.
Metallurgical Coatings and Thin Films 1990.
p.
640.
Hilton, M. R.
and
Fleischauer, P. D.
1990.
TEM lattice imaging of the nanostructure of early-growth sputter-deposited MoS2solid lubricant films.
Journal of Materials Research,
Vol. 5,
Issue. 2,
p.
406.
Lince, Jeffrey R.
Hilton, Michael R.
and
Bommannavar, Arun S.
1990.
Oxygen substitution in sputter-deposited MoS2 films studied by extended X-ray absorption fine structure, X-ray photoelectron spectroscopy and X-ray diffraction.
Surface and Coatings Technology,
Vol. 43-44,
Issue. ,
p.
640.
Hilton, M.R.
Bauer, R.
and
Fleischauer, P.D.
1990.
Tribological performance and deformation of sputter-deposited MoS2 solid lubricant films during sliding wear and indentation contact.
Thin Solid Films,
Vol. 188,
Issue. 2,
p.
219.
Jervis, T.R.
Hirvonen, J-P.
and
Nastasi, M.
1991.
Post deposition excimer laser processing of MoSx thin films.
Journal of Materials Research,
Vol. 6,
Issue. 6,
p.
1350.
Buck, V.
1991.
Lattice parameters of sputtered MoS2 films.
Thin Solid Films,
Vol. 198,
Issue. 1-2,
p.
157.
Donley, M. S.
Zabinski, J. S.
Dyhouse, V. J.
John, P. J.
Murray, P. T.
and
McDevitt, N. T.
1991.
Laser Ablation Mechanisms and Applications.
Vol. 389,
Issue. ,
p.
271.
Pierce, Daniel E.
Burns, Richard P.
Dauplaise, Helen M.
and
Mizerka, Lawrence J.
1991.
Thermal Desorption Spectroscopy of Sputtered MoSxFilms.
Tribology Transactions,
Vol. 34,
Issue. 2,
p.
205.
Cong, Q.
Yu, D.
Wang, J.
and
Ou, Y.J.
1992.
Primary study of structures of r.f.-sputtered MoS2 films.
Thin Solid Films,
Vol. 209,
Issue. 1,
p.
1.
Zabinski, J.S.
Donley, M.S.
Dyhouse, V.J.
and
McDevitt, N.T.
1992.
Chemical and tribological characterization of PbOMoS2 films grown by pulsed laser deposition.
Thin Solid Films,
Vol. 214,
Issue. 2,
p.
156.
Spalvins, T.
1992.
Lubrication with sputtered MoS2 films: Principles,operation, and limitations.
Journal of Materials Engineering and Performance,
Vol. 1,
Issue. 3,
p.
347.
Savadogo, O.
and
Mandal, K.C.
1992.
Studies on new chemically deposited photoconducting antimony trisulphide thin films.
Solar Energy Materials and Solar Cells,
Vol. 26,
Issue. 1-2,
p.
117.
Donnet, C.
Le Mogne, Th.
and
Martin, J.M.
1993.
Superlow friction of oxygen-free MoS2 coatings in ultrahigh vacuum.
Surface and Coatings Technology,
Vol. 62,
Issue. 1-3,
p.
406.
Kraut, D.
Weise, G.
Olbrich, W.
and
Kampschulte, G.
1993.
Low friction composite coating of CrxSiy/MoS2 on steel.
Surface and Coatings Technology,
Vol. 60,
Issue. 1-3,
p.
515.
Moser, J.
and
Lévy, F.
1994.
Random stacking in MoS2−x sputtered thin films.
Thin Solid Films,
Vol. 240,
Issue. 1-2,
p.
56.
Weise, G.
Kraut, D.
Olbrich, W.
and
Kampschulte, G.
1994.
Influence of variations of the steel substrate-Cr3Si(Cr)/MoS2−x film system on wear properties.
Surface and Coatings Technology,
Vol. 68-69,
Issue. ,
p.
512.
Obeng, Jacob A.
and
Schrader, Glenn L.
1994.
Reactive sputtering of molybdenum sulfide thin films.
Surface and Coatings Technology,
Vol. 68-69,
Issue. ,
p.
422.
Bhosale, C.H.
Uplane, M.D.
Patil, P.S.
and
Lockhande, C.D.
1994.
Preparation and properties of sprayed antimony trisulphide films.
Thin Solid Films,
Vol. 248,
Issue. 2,
p.
137.