Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-24T21:14:47.085Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel route to alumina and aluminate interlayer coatings for SiC, carbon, and Kevlart® fiber-reinforced ceramic matrix composites using carboxylate–alumoxane nanoparticles

Published online by Cambridge University Press:  31 January 2011

Rhonda L. Callender  and
Andrew R. Barron
Rhonda L. Callender
Affiliation:
Department of Chemistry, Department of Mechanical Engineering and Materials Science, and Center for Nanoscale Science and Technology, Rice University, Houston, Texas 77005
Andrew R. Barron
Affiliation:
Department of Chemistry, Department of Mechanical Engineering and Materials Science, and Center for Nanoscale Science and Technology, Rice University, Houston, Texas 77005
Get access

Abstract

SiC, carbon, and Kevlart® fibers were coated with carboxylate–alumoxane nanoparticles and their calcium-, lanthanum-, and yttrium-doped analogs; firing to 1400 °C formed uniform aluminate coatings. Optimum processing sequences were determined. Both carboxylate–alumoxane- and ceramic-coated fibers were examined by field emission scanning electron microscopy, microprobe analysis, and optical microscopy. Coatings produced were stable to thermal cycling under air at 1400 °C. Fiber-reinforced ceramic matrix composites were prepared and results from 3-point bend tests for carbon/Kevlar®-fabric-reinforced ceramic matrix composites (CMCs) and carbon-fiber-reinforced CMCs were determined. Flexure strength for carbon-fiber- and carbon/Kevlart®-fiber-reinforced alumina CMCs was determined.

Type
Articles
Information
Journal of Materials Research , Volume 15 , Issue 10 , October 2000 , pp. 2228 - 2237
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Besmann, T.M., Stinton, D.P., Kupp, E.R., Shanmugham, S., and Liaw, P.K., in Interfacial Engineering for Optimized Properties, edited by Briant, C.L., Carter, C.B., and Hall, E.L. (Mater. Res. Soc. Symp. Proc. 458, Pittsburgh, PA, 1997), p. 147.Google Scholar
2. Kerans, R.J., Hay, R.S., Pagano, N.J., and Parthasarathy, T.A., Am. Ceram. Soc. Bull. 68, 429 (1989).Google Scholar
3. Xiao, Y., Tang, B.J., Suib, S.L., and Galasso, F.S., in Synthesis and Processing of Ceramics: Scientific Issues, edited by Rhine, W.E., Shaw, T.M., Gottschall, R.J., and Chen, Y. (Mater. Res. Soc. Symp. Proc. 249, Pittsburgh, PA, 1992), pp. 213–220.Google Scholar
4. Cao, H.C., Birschoff, E., Sbaizero, O., Rühle, M., Evans, A.G., Marshall, D.B., and Brennan, J.J., J. Am. Ceram. Soc. 73, 1691 (1990).CrossRefGoogle Scholar
5. Wei, G.C. and Becher, P.F., Am. Ceram. Soc. Bull. 64, 298 (1985).Google Scholar
6. Cinibulk, M.K., J. Am. Ceram. Soc. 81, 2789 (1998).CrossRefGoogle Scholar
7. Cinibulk, M.K., Ceram. Eng. Sci. Proc. 15, 712 (1994).Google Scholar
8. Morgan, P.E.D and Marshall, D.B., Mater. Sci. Eng. A 162, 15 (1993).CrossRefGoogle Scholar
9. Cinibulk, M.K., J. Mat. Res. 10, 71 (1995).CrossRefGoogle Scholar
10. Ropp, P.R.C and Carroll, B., J. Am. Ceram. Soc. 63, 416 (1980).CrossRefGoogle Scholar
11. Cinibulk, M.K., Ceram. Eng. Sci. Proc. 16, 633 (1995).CrossRefGoogle Scholar
12. Lackey, W.J., in CVD of Nonmetals, edited by Rees, W.S. Jr, (VCH, New York, 1996), pp. 341–349.Google Scholar
13. Partlow, D.P. and Yoldas, B.E., J. Non-Cryst. Solids 46, 153 (1981).CrossRefGoogle Scholar
14. Hay, R.S., Petry, M.D., Keller, K.A., Cinibulk, M.K., and Welch, J.R., (Mater. Res. Soc. Symp. Proc.) 365, (Pittsburgh, PA, 1995).Google Scholar
15. Yoldas, B.E., J. Non-Cryst. Solids 63, 145 (1984).CrossRefGoogle Scholar
16. Callender, R.L., Harlan, C.J., Shapiro, N.M., Jones, C.D., Callahan, D.L., Wiesner, M.R., Cook, R., and Barron, A.R., Chem. Mater. 9, 2418 (1997).CrossRefGoogle Scholar
17. Landry, C.C., Pappè, N., Mason, M.R., Apblett, A.W., Tyler, A.N., MacInnes, A.N., and Barron, A.R., J. Mater. Chem. 5, 331 (1995).CrossRefGoogle Scholar
18. Callender, R.L., Harlan, C.J., Callahan, D.L., Wiesner, M., Cook, R.L., and Barron, A.R., Ceramic Trans. 87, 13 (1998).Google Scholar
19. Kareiva, A., Harlan, C.J., MacQueen, D.B., Cook, R., and Barron, A.R., Chem. Mater. 8, 2331 (1996).CrossRefGoogle Scholar
20. Harlan, C.J., Kareiva, A., MacQueen, D.B., Cook, R., and Barron, A.R., Adv. Mater. 9, 68 (1997).CrossRefGoogle Scholar
21. Callender, R.L. and Barron, A.R., J. Am. Ceram. Soc. (2000, in press).Google Scholar
22. Hecht, E. and Zajac, A., Optics (Addison-Wesley, Reading, MA, 1974).Google Scholar
23. Handbook of Chemistry and Physics, 66th ed., edited by R.C. Weast (CRC Press, Boca Raton, FL, 1985).Google Scholar
24. Hay, R.S., Ceram. Eng. Sci. Proc. 12, 1064 (1992).CrossRefGoogle Scholar
25. Shen, L., Tan, B.J., Suib, S.L., and Galasso, F.S., in Synthesis and Processing of Ceramics: Scientific Issues, edited by Rhine, W.E., Shaw, T.M., Gottschall, R.J., and Chen, Y. (Mater. Res. Soc. Symp. Proc., 249, Pittsburgh, PA) pp. 227–232 (1992).Google Scholar
26. Brooksbank, D., J. Iron Steel Inst. (London) 208, 495 (1970).Google Scholar
27. Hecht, N.L., McCullum, D.E., and Graves, G.A., Ceram. Eng. Sci. Proc. 9, 1313, (1988).CrossRefGoogle Scholar
28. Miller, J.H., Lowden, R.A., and Liaw, P.K., Mat. Res. Soc. Symp. Proc., 365, 403 (1995).CrossRefGoogle Scholar
29. Cinibulk, M.K. and Hay, R.S., J. Am. Ceram. Soc. 79, 1233 (1996).CrossRefGoogle Scholar
30. Courtright, E.L., Ceram. Eng. Sci. Proc., 12, 1725 (1991).CrossRefGoogle Scholar
31. Yang, X.F. and Knowles, K.M., Ceram. Trans. 19, 647 (1991);Google Scholar
Hseuh, C.H., Acta Metall. Mater. 38, 403 (1990).CrossRefGoogle Scholar