Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-22T08:18:46.468Z Has data issue: false hasContentIssue false

Preparation of ZnO by a nearby vaporizing chemical vapor deposition method

Published online by Cambridge University Press:  31 January 2011

Junichi Nishino
Affiliation:
Nagaoka University of Technology, Department of Chemistry, 1603–1 Kamitomioka-machi, Nagaoka-shi, Niigata 940–2188, Japan
Yoshio Nosaka
Affiliation:
Nagaoka University of Technology, Department of Chemistry, 1603–1 Kamitomioka-machi, Nagaoka-shi, Niigata 940–2188, Japan
Get access

Abstract

Zinc oxide (ZnO) films were prepared by a nearby vaporizing chemical vapor deposition method using bis(2,4-pentanedionato)zinc as a source material. The deposition rate increased exponentially from 0.58 to 147 nm min−1 with increasing substrate temperature (Ts). The highest preferred orientation to the c axis was obtained under the conditions that the distance between substrate and source surface was 5.0 mm, and the Ts was 300 °C. When we used a sapphire (0001) substrate, an epitaxial ZnO film could be deposited on this condition.

Type
Rapid Communications
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Kawasaki, M., Ohtomo, A., Ohkubo, I., Koinuma, H., Tang, Z.K., Yu, P., Wong, G.K.L., Zhang, B.P., and Segawa, Y., Mater. Sci. Eng. B 56, 239 (1998).Google Scholar
2.Souletie, P. and Wessels, B.W., J. Mater. Res. 3, 740 (1988).Google Scholar
3.Roth, A.P. and Williams, D.F., J. Appl. Phys. 52, 6685 (1981).Google Scholar
4. A.P.Roth and Williams, D.F., J. Electrochem. Soc. 128, 2684 (1981).Google Scholar
5.Wenas, W.W., Yamada, A., Konagai, M., and Takahashi, K., Jpn. J. Appl. Phys. 30(3B), L441 (1991).Google Scholar
6.Fu, Zhuxi, Lin, Bixia, and Zu, Jie, Thin Solid Films 402, 302 (2002).Google Scholar
7.Kamata, K., Nishino, J., Ohshio, S., Maruyama, K., and Ohtuki, M., J. Am. Ceram. Soc. 77, 505 (1994).Google Scholar
8.Rudolph, G. and Henry, M.C., Inorg. Synth. X, 74 (1967).Google Scholar