Hostname: page-component-7bb8b95d7b-wpx69 Total loading time: 0 Render date: 2024-09-13T20:28:09.020Z Has data issue: false hasContentIssue false
  • English
  • Français

Solution-Based Processing of Sc2O3 Nanopowders Yielding Transparent Ceramics

Published online by Cambridge University Press:  03 March 2011

Ji-Guang Li ,
Takayasu Ikegami  and
Toshiyuki Mori
Ji-Guang Li*
Affiliation:
Advanced Materials Laboratory, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044, Japan
Takayasu Ikegami
Affiliation:
Advanced Materials Laboratory, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044, Japan
Toshiyuki Mori
Affiliation:
Advanced Materials Laboratory, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044, Japan
*
a)Address all correspondence to this author. e-mail: LI.Jiguang@nims.go.jp
Get access

Abstract

A basic sulfate precursor [Sc(OH)SO4·2H2O] for well-sinterable Sc2O3 powders was precipitated from mixed solutions of scandium nitrate [Sc(NO3)3] and ammonium sulfate [(NH4)2SO4] at room temperature and which was subsequently converted to Sc2O3 via dehydroxylization and desulfurization at temperatures ≥900 °C. With the reactive powders synthesized in this work, polycrystalline Sc2O3 ceramics showing high inline transmittances of approximately 70% in the visible wavelength region (corresponding to ∼90% of the theoretical value of single crystals) have been fabricated via vacuum sintering at a relatively low temperature of 1700 °C.

Keywords

Chemical synthesisNanoparticleSintering
Type
Articles
Information
Journal of Materials Research , Volume 19 , Issue 3 , March 2004 , pp. 733 - 736
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Horovitz, C.T. and Gschneidner, G.A.Scandium (Academic Press, New York, 1975).Google Scholar
2Rainer, F., Lowdermilk, W.H., Milam, D., Hart, T.T., Lichtenstein, T.L. and Carniglia, C.K.Appl. Opt. 21 3685 (1982).CrossRefGoogle Scholar
3Fornasiero, E., Mix, V., Peters, K.Petermann, , and Huber, G.Ceram. Int. 26 589 (2000) and references therein.CrossRefGoogle Scholar
4Li, J-G, Ikegami, T and Mori, T, J. Mater. Res. 18 1816 (2003).CrossRefGoogle Scholar
5Li, J-G, Ikegami, T, Mori, T, and Yajima, Y, J. Mater. Res. 18 1149 (2003).Google Scholar
6Sidgwick, N.V.The Chemical Elements and Their Compounds (Clarendon Press, Oxford, 1962).Google Scholar
7Thompson, L.C., in Handbook on the Physics and Chemistry of Rare Earths, edited by Gschneidner, K.A. and Eyring, L.R. (North-Holland Physics Publishing, Amsterdam, 1979), 3, p. 209.Google Scholar
8Sacks, M.D., Tseng, T.Y., and Lee, S.Y.Am. Ceram. Soc. Bull. 63 301 (1984).Google Scholar
9 JCPDS No. 43-1028. International Center for Diffraction Data: Newton Square, PA, (1998).Google Scholar