Hostname: page-component-5c6d5d7d68-7tdvq Total loading time: 0 Render date: 2024-08-13T15:25:27.980Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural and textural changes from polyimide Upilex to graphite: Part III

Published online by Cambridge University Press:  08 April 2017

C. Bourgerette ,
A. Oberlin  and
M. Inagaki
C. Bourgerette
Affiliation:
Laboratoire Marcel Mathieu, UMR124 CNRS-DRET-UPPA, 2 Avenue du Président Pierre Angot, Centre Hélioparc, F-64000, Pau, France
A. Oberlin
Affiliation:
Laboratoire Marcel Mathieu, UMR124 CNRS-DRET-UPPA, 2 Avenue du Président Pierre Angot, Centre Hélioparc, F-64000, Pau, France
M. Inagaki
Affiliation:
Department of Applied Chemistry, Hokkaido University, Sapporo, 060Japan
Get access

Extract

25 μm thick Upilex films (registered UBE trademark) were carbonized, then graphitized at various temperatures up to 2800 °C and studied by optical and electron microscopies. While the graphitizing behavior of Kapton films is similar to that of anthracites, Upilex graphitization is erratic from one film to the other. The thickness of the better graphitizing Upilex films decreases as the anisotropy increases. Their graphitization occurs at a relatively low temperature (2100 °C), because the oxygen is entirely labile (no cross-linking). Non-graphitizing films are obtained when oxygen remains stable as the heat-treatment temperature (HTT) increases. They stay optically isotropic and microporous without flattening, and even show a limited swelling instead of a thinning. This behavior is attributed to the random mobility of the imide part of the molecule when carbonization starts.

Type
Research Article
Information
Journal of Materials Research , Volume 8 , Issue 1 , January 1993 , pp. 121 - 130
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Bourgerette, C., Oberlin, A., and Inagaki, M., J. Mater. Res. 7, 1158 (1992).CrossRefGoogle Scholar
2.Rouzaud, J.N. and Oberlin, A., Carbon 27, 517 (1989).CrossRefGoogle Scholar
3.Oberlin, A., Chemistry and Physics of Carbon, edited by Thrower, P. A. (Marcel Dekker, New York, 1989), Vol. 22, pp. 1–141.Google Scholar
4.Terriere, G. and Oberlin, A., Carbon 13, 367 (1975).Google Scholar
5.De Fonton, S., Oberlin, A., and Inagaki, M., J. Mater. Sci. 15, 909 (1980).CrossRefGoogle Scholar
6.Warren, B. E., Phys. Rev. 59, 693 (1941).CrossRefGoogle Scholar
7.Franklin, R.E., Proc. R. Soc. A 209, 196 (1951).Google Scholar
8.Brindley, G.W. and Mering, J., Acta Crystallogr. 4, 467 (1951).Google Scholar
9.Huttepain, M. and Oberlin, A., Carbon 28, 103 (1990).CrossRefGoogle Scholar
10.Millet, J., Millet, J.E., and Vivares, A., J. Chim. Phys. 60, 553 (1963).CrossRefGoogle Scholar