Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-16T20:15:59.287Z Has data issue: false hasContentIssue false
  • English
  • Français

Tensile deformation of anisotropic porous copper with directional pores

Published online by Cambridge University Press:  31 January 2011

M. Tane ,
R. Okamoto  and
H. Nakajima
H. Nakajima
Affiliation:
The Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567-0047, Japan
Get access

Abstract

The tensile deformation of anisotropic porous copper with unidirectionally oriented cylindrical pores was investigated by an acoustic emission method. In the loadings parallel and perpendicular to the orientation direction of the pores, many cracks are formed after yielding and they strongly affect the deformation. The formed cracks rapidly grow and connect with each other near the peak stress of the stress–strain curve, thereby leading to final fracture. Crack formation is easier under perpendicular loading than under parallel loading, because high stress concentration and stress triaxiality occurs around the pores. As a result, the strength and elongation for perpendicular loading are much smaller than those for parallel loading. Furthermore, in the case of perpendicular loading, the localized deformation around pores drastically decreases the plastic Poisson's ratio. These results indicate that a porous copper macroscopically behaves as a semibrittle material under perpendicular loading, while the porous copper exhibits ductility under parallel loading.

Keywords

FoamCuStress/strain relationship
Type
Articles
Information
Journal of Materials Research , Volume 25 , Issue 10 , October 2010 , pp. 1975 - 1982
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., Wadley, H.N.G.Metal Foams: A Design Guide (Butterworth-Heinemann, Burlington 2000)Google Scholar
2.Gibson, L.J., Ashby, M.F.Cellular Solids: Structure and Properties (Cambridge University Press, Cambridge, UK 1997)CrossRefGoogle Scholar
3.Banhart, J.Manufacture, characterisation and application of cellular metals and metal foams. Prog. Mater. Sci. 46, 559 (2001)CrossRefGoogle Scholar
4.Sugimura, Y., Meyer, J., He, M.Y., Bart-Smith, H., Grenstedt, J., Evans, A.G.On the mechanical performance of closed cell Al alloy foams. Acta Mater. 45, 5245 (1997)CrossRefGoogle Scholar
5.Bart-Smith, H., Bastawros, A.F., Mumm, D.R., Evans, A.G., Sypeck, D.J., Wadley, H.N.G.Compressive deformation and yielding mechanisms in cellular Al alloys determined using x-ray tomography and surface strain mapping. Acta Mater. 46, 3583 (1998)CrossRefGoogle Scholar
6.McCullough, K.Y.G., Fleck, N.A., Ashby, M.F.Uniaxial stress–strain behaviour of aluminum alloy foams. Acta Mater. 47, 2323 (1999)CrossRefGoogle Scholar
7.Andrews, E., Sanders, W., Gibson, L.J.Compressive and tensile behaviour of aluminum foams. Mater. Sci. Eng., A 270, 113 (1999)CrossRefGoogle Scholar
8.Markaki, A.E., Clyne, T.W.The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams. Acta Mater. 49, 1677 (2001)CrossRefGoogle Scholar
9.Motz, C., Pippan, R.Deformation behaviour of closed-cell aluminium foams in tension. Acta Mater. 49, 2463 (2001)CrossRefGoogle Scholar
10.Amsterdam, E., de Vries, J.H.B., De Hosson, J.T.M., Onck, P.R.The influence of strain-induced damage on the mechanical response of open-cell aluminum foam. Acta Mater. 56, 609 (2008)CrossRefGoogle Scholar
11.Shapovalov, V.Porous metals. MRS Bull. 19, (4)24 (1994)CrossRefGoogle Scholar
12.Liu, Y., Li, Y., Zhang, H.Fabrication of lotus-structured porous magnesium with Gasar process. Acta Metall. Sinica 40, 1121 (2004)Google Scholar
13.Knacke, O., Probst, H., Wernekinck, J.On blow-hole formation during solidification of silver melts containing oxygen and copper melts containing oxygen and sulphur. Z. Metallkd. 70, 1 (1979)Google Scholar
14.Nakajima, H.Fabrication, properties and application of porous metals with directional pores. Prog. Mater. Sci. 52, 1091 (2007)CrossRefGoogle Scholar
15.Nakajima, H., Hyun, S.K., Ohashi, K., Ota, K., Murakami, K.Fabrication of porous copper by unidirectional solidification under hydrogen and its properties. Colloids Surf., A 179, 209 (2001)CrossRefGoogle Scholar
16.Tane, M., Ichitsubo, T., Hyun, S.K., Nakajima, H.Anisotropic yield behavior of lotus-type porous iron: Measurements and micromechanical mean-field analysis. J. Mater. Res. 20, 135 (2005)CrossRefGoogle Scholar
17.Tane, M., Ichitsubo, T., Nakajima, H., Hyun, S.K., Hirao, M.Elastic properties of lotus-type porous iron: Acoustic measurement and extended effective-mean-field theory. Acta Mater. 52, 5195 (2004)CrossRefGoogle Scholar
18.Ichitsubo, T., Tane, M., Ogi, H., Hirao, M., Ikeda, T., Nakajima, H.Anisotropic elastic constants of lotus-type porous copper: Measurements and micromechanics modeling. Acta Mater. 50, 4105 (2002)CrossRefGoogle Scholar
19.Hyun, S.K., Murakami, K., Nakajima, H.Anisotropic mechanical properties of porous copper fabricated by unidirectional solidification. Mater. Sci. Eng., A 299, 241 (2001)CrossRefGoogle Scholar
20.Simone, A.E., Gibson, L.J.The tensile strength of porous copper made by the GASAR process. Acta Mater. 44, 1437 (1996)CrossRefGoogle Scholar
21.Kovacik, J.The tensile behaviour of porous metals made by GASAR process. Acta Mater. 46, 5413 (1998)CrossRefGoogle Scholar
22.Kujime, T., Tane, M., Hyun, S.K., Nakajima, H.Three-dimensional image-based modeling of lotus-type porous carbon steel and simulation of its mechanical behavior by finite element method. Mater. Sci. Eng., A 460, 220 (2007)CrossRefGoogle Scholar
23.Kee, A., Matic, P., Popels, L.A two dimensional computational study of a gasar porous copper micro structure. Mater. Sci. Eng., A 225, 85 (1997)CrossRefGoogle Scholar
24.Kee, A., Matic, P., Wolla, J.M.A computational study of elongated pore interactions in a low density porous copper. Mater. Sci. Eng., A 230, 14 (1997)CrossRefGoogle Scholar
25.Park, J.S., Hyun, S.K., Suzuki, S., Nakajima, H.Effect of transference velocity and hydrogen pressure on porosity and pore morphology of lotus-type porous copper fabricated by a continuous casting technique. Acta Mater. 55, 5646 (2007)CrossRefGoogle Scholar
26.Ogami, M.Acoustic Emission-Bases and Applications (Corona Publishing, Tokyo, Japan 1976)Google Scholar
27.ASM Handbook Vol. 12 (American Society for Metals, Materials Park, OH 1987)Google Scholar
28.Agogino, A.M.Notch effects, stress state, and ductility. J. Eng. Mater. Technol. 100, 348 (1978)CrossRefGoogle Scholar
29.Knott, J.F.Fundamentals of Fracture Mechanics (Butterworth, London 1973)Google Scholar