Hostname: page-component-6d856f89d9-4thr5 Total loading time: 0 Render date: 2024-07-16T08:56:11.479Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Annealing Temperature in the Course of Mechanical-Thermal Treatment upon the Steady-State Creep Rate of Metals

Published online by Cambridge University Press:  01 May 2013

Andrew Rusinko
Andrew Rusinko*
Affiliation:
Óbuda University, H-1081, Népszinház St. 8, Budapest, Hungary
*
*Corresponding author (ruszinko.endre@bgk.uni-obuda.hu)
Get access

Abstract

The influence of annealing temperature in the course of mechanical-thermal treatment on the steady-state creep of metals is discussed and modeled. The synthesis theory of irrecoverable deformation is taken as a mathematical apparatus. Results obtained in terms of the generalized synthetic theory give good agreements with experimental data.

Keywords

Mechanical-thermal treatmentPolygonizationRecrystallizationPlastic and creep deformation
Type
Articles
Information
Journal of Mechanics , Volume 29 , Issue 3 , September 2013 , pp. 535 - 538
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Rusinko, A. and Rusinko, K., Plasticity and Creep of Metals, Springer, Berlin (2011).Google Scholar
2.Rusinko, A., “Analytic Dependence of the Rate of Stationary Creep of Metals on the Level of Plastic Prestrain,” Journal of Strength of Metals, 34, pp. 381–389 (2002).Google Scholar
3.Rusynko, A., “Influence of Preliminary Mechanical and Thermal Treatment on the Steady-State Creep of Metals,” Journal of Materials Science, 40, pp. 223–231 (2004)Google Scholar
4.Rusinko, A., Ginsztler, J. and Dévényi, L., “Analytic Description of the Formation of Pores Under Conditions of Steady-State Creep of Metals,” Journal of Strength of Materials, 39, pp. 74–79 (2007).Google Scholar
5.Devenyi, L. and Biro, T., “Investigation of Creep Cavities by Scanning Electron Microscope,” Materials Science Forum, 414–415, pp. 183–187 (2003).Google Scholar
6.Asszonyi, Cs., Szarka, Z. and Ván, P., Izotrop Kontinuumok Rugalmas És Képlékeny Állapota - Elastic and Plastic State of Isotropy Continuum, Budapest, Műegyetemi Kiadó (2007).Google Scholar
7.Fülöp, T. and Ván, P., “Kinematic Quantities of Finite Elastic and Plastic Deformation,” Mathematical Methods in the Applied Sciences, 35, pp. 1825–1841 (2012).Google Scholar
8.Batdorf, S. and Budiansky, B., Mathematical Theory of Plasticity Based on the Concept of Slip, NACA, Technical note, 871 (1949).Google Scholar
9.Sanders, J., “Plastic Stress–Strain Relations Based on Linear Loading Functions,” Proceedings of the 2nd U.S. National Congress of Applied Mechanics, edited by P.M. Naghdi, ASME, pp. 455–460 (1954).Google Scholar
10.Rusinko, A. and Rusinko, K., “Synthetic Theory of Irreversible Deformation in the Context of Fundamental Bases of Plasticity,” International Journal of Mechanics of Materials, 41, pp. 106–120 (2009).Google Scholar
11.Rusinko, A., “Peculiarities of Irreversible Straining in Step-Wise Loading, Reverse and Inverse Creep,” Acta Mechanica Solida Sinica, 25, pp. 152–167 (2012).Google Scholar
12.Ivanova, V., Gordienko, V., Fridman, Z. and Zubarev, P., “Mechanical-Thermal Treatment as an Effective Method of the Increase of High-Temperature Strength of Metals,” Fizika Metallov I Metallovedenije, 1, pp. 119–126 (1966).Google Scholar
13.Tikhonov, L., Structure and Properties of Metals and Alloys — Reference Book, Naukova Dumka, Kiev (1986).Google Scholar