Hostname: page-component-84b7d79bbc-g7rbq Total loading time: 0 Render date: 2024-07-29T20:40:41.559Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study on the Safety of the Shear Capacity Design of Reinforced Concrete Beam-Column Joints

Published online by Cambridge University Press:  05 May 2011

W.-Y. Lu
W.-Y. Lu*
Affiliation:
Department of Civil Engineering, China University of Technology, Taipei, Taiwan 11695, R.O.C.
*
*Associate Professor
Get access

Abstract

The shear failure probabilities of reinforced concrete beam-column joints have been investigated by Monte Carlo method. The theoretical shear strength of joints is based on the softened strut-and-tie model proposed by Hwang and Lee (2002). The random variables included in this study are the strengths of concrete, the ultimate compression strain of concrete, the strengths of reinforcement, the dimensions of cross-section, and the model error of theoretical shear strength of joints. The shear failure probabilities of joints with SD 280 flexural reinforcement in the beams designed using the ACI Code are all higher than 0.04. The joints designed according to the softened strut-and-tie model are safer than those designed according to the ACI Code. The shear failure probabilities of exterior joints are higher than those of interior joints. The shear failure probabilities of joints with SD 280 flexural reinforcement in the beams are higher than those of joints with SD 420 flexural reinforcement.

Keywords

JointsShearConcreteMonte Carlo methodProbabilities
Type
Articles
Information
Journal of Mechanics , Volume 22 , Issue 4 , December 2006 , pp. 311 - 320
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Chen, C. C. and Hsu, S. M., “Formulas for Curvature Ductility Design of Doubly Reinforced Concrete Beams,” Journal of Mechanics, 20, pp. 257–265 (2004).CrossRefGoogle Scholar
2.Paulay, T. and Priestley, M. J. N., “Seismic Design of Reinforced Concrete and Masonry Buildings,” John Wiley & Sons, 744 pp. (1992).Google Scholar
3. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318–05) and Commentary (ACI 318R-05),” American Concrete Institute, Farmington Hills, MI, 430 pp. (2005).Google Scholar
4.Hwang, S. J. and Lee, H. J., “Analytical Model for Predicting Shear Strengths of Exterior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI Structural Journal, 96(5), pp. 846–857 (1999).Google Scholar
5.Hwang, S. J. and Lee, H. J., “Analytical Model for Predicting Shear Strengths of Interior Reinforced Concrete Beam-column Joints for Seismic Resistance,” ACI Structural Journal, 97(1), pp. 34–44 (2000).Google Scholar
6.Hwang, S. J. and Lee, H. J., “Strength Prediction for Discontinuity Regions Failing in Diagonal Compressions by Softened Strut-and-tie Model,” Journal of Structural Engineering, ASCE, 128(12), pp. 1519–1526(2002).CrossRefGoogle Scholar
7.Nowak, A. S. and Szerszen, M. M., “Calibration of Design Code for Buildings (ACI 318): Part 1- Statistical Models for Resistance,” ACI Structural Journal, 100(3), pp. 377–382 (2003).Google Scholar
8.Hognestad, E., “A Study of Combined Bending and Axial Load in Reinforced Concrete Members,” University of Illinois Engineering Experimental Station, Bulletin Series No. 399, 128 pp (1951).Google Scholar
9.Chen, C. C., Hwang, S. J. and Lee, H. J., “Mechanical Properties and Over-Strength Factor of Steel Bars of Taiwan,” Journal of the Chinese Institute of Civil and Hydraulic Engineering, 12(2), pp. 233–238 (2000) (in Chinese).Google Scholar
10.Diniz, S. M. C. and Frangopol, D. M., “Reliability Bases for High-Strength Concrete Columns,” Journal of Structural Engineering, ASCE, 123(10), pp. 1375–1381 (1997).CrossRefGoogle Scholar
11.Mirza, S. A. and MacGregor, J. G., “Statistical Study of Shear Strength of Reinforced concrete Slender Beams,” ACI Journal, 76(11), pp. 1159–1177 (1979).Google Scholar
12.MacGregor, J. G. and Wight, J. K., Reinforced Concrete: Mechanics and Design, Prentice-Hall, Inc., N.J. (2005).Google Scholar
13.Park, R. and Paulay, T., Reinforced Concrete Structures, John Wiley and Sons, New York, p. 769 (1975).CrossRefGoogle Scholar
14.Ang, A H-S and Tang, W. H., Probabilities Concepts in Engineering Planning and Design (Vol. II: Decision, Risk, and Reliability), New York: John Wiley and Sons, p. 562 (1984).Google Scholar
15.Marek, P., Guštar, M. and Anagnos, T., Simulation-Based Reliability Assessment for Structural Engineers, CRC Press. Inc., p. 365(1996).Google Scholar
16. AISC, Manual of Steel Construction-Load and Resistance Factor Design, Chicago, Illinois (1999).Google Scholar