Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-07-01T23:27:04.305Z Has data issue: false hasContentIssue false

Étude théorique et expérimentale du comportement non-linéaire d'un engrenage droit induit par le jeu entre dents

Published online by Cambridge University Press:  13 November 2007

Sébastien Espin
Affiliation:
Laboratoire de Tribologie et Dynamiques des Systèmes, UMR 5513, École Centrale de Lyon, 69134 Écully Cedex, France
Joël Perret-Liaudet
Affiliation:
Laboratoire de Tribologie et Dynamiques des Systèmes, UMR 5513, École Centrale de Lyon, 69134 Écully Cedex, France
Ahmet Kahraman
Affiliation:
Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210-4678, USA
Get access

Abstract

Nous nous intéressons dans cette étude à un modèle dynamique non-linéaire d'un engrenage droit à un degré de liberté. Ce modèle permet de prendre en compte la présence du jeu entre dents ainsi que la non-linéarité de la raideur d'engrènement associée à l'évolution instantanée du nombre de dents en prise. Notre étude concerne le cas d'engrenages corrigés par des corrections linéaires en tête de denture ainsi que des engrenages non corrigés. Le but de cette étude a été d'analyser la pertinence de ce modèle vis-à-vis de résultats expérimentaux mettant en œuvre un banc d'essais dont les caractéristiques, notamment aux niveaux de la micro-géométrie des dentures, sont parfaitement contrôlées. En conclusion, les résultats comparatifs sont encourageants, même si nous n'avons pas pu reproduire par simulation certains phénomènes non-linéaires observés. Parmi ceux-ci, on peut citer le cas de la cascade harmonique observée sur un engrenage corrigé et prenant naissance au niveau de la résonance principale.

Type
Research Article
Copyright
© AFM, EDP Sciences, 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Harris, L.S., Dynamic loads on the teeth of spur gears, I. Mech. E. 172 (1958) 87112
Gregory, R.W., Harris, S.L., Munro, R.G., Dynamic behavior of spur gears, I. Mech. E. 178 (1964) 207226
Niemann, G., Baethge, J., Drehwegfehler, zahnfedernärte und gerdush bei stirnrädern, VDI-Z 112 (1970) 205214
Niemann, G., Baethge, J., Drehwegfehler, Zahnfedernärleund gerdush bei stirnrädern, VDI-Z 112 (1970) 475499
D.B. Welbourn, Fundamental knowledge of gear noise – a survey, Proceedings of the Conference on Noise and Vibration of Engines and Transmissions, I. Mech. E. C117/79 (1979) 9–14
Özgüven, H.N., Houser, D.R., Dynamic analysis of high speed gears by using loaded static transmission error, J. Sound Vib. 125 (1988) 7183 CrossRef
Kahraman, A., Singh, R., Non-linear dynamics of a spur gear, J. Sound Vib. 142 (1990) 4975 CrossRef
Kasuba, R., Evans, J.W., An extended model for determining dynamic loads in spur gearing, ASME J. Mech. Design 103 (1981) 398409 CrossRef
F. Kücükay, Dynamic behaviour of high speed gears, I. Mech. E. C317/84 (1984) 81–90
Yang, D.C.H., Lin, J.Y., Hertzian damping, tooth friction and bending elasticity in gear impact dynamics, ASME J. Mechanisms, Transmissions and Automation in Design 109 (1987) 189196 CrossRef
Lin, H.-H., Huston, R.L., On, J.J. Coy dynamic loads in parallel shaft transmissions: part I – Modelling and analysis, ASME J. Mechanisms, Transmissions and Automation in Design 110 (1988) 221225 CrossRef
Kahraman, A., Singh, R., Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system, J. Sound Vib. 146 (1991) 135156 CrossRef
Blankenship, G.W., Kahraman, A., Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity, J. Sound Vib. 185 (1995) 743765 CrossRef
Kahraman, A., Blankenship, G.W., Interactions between commensurate parametric and forcing excitations in a system with clearance, J. Sound Vib. 194 (1996) 317336 CrossRef
Yoon, K.Y., Rao, S.S., Dynamic load analysis of spur gears using a new tooth profile, ASME J. Mech. Design 118 (1996) 16 CrossRef
Theodossiades, S., Natsavias, S., Non-linear dynamics of gear-pair systems with periodic stiffness and backlash, J. Sound Vib. 229 (2000) 287310 CrossRef
Ichimaru, K., Hirano, F., Dynamic behavior of heavy-loaded spur gears, ASME J. Eng. Industry 96 (1974) 373381 CrossRef
Cornell, R.W., Westervelt, W.W., Dynamic tooth loads and stressing for high contact ratio spur gears, ASME J. Mech. Design 100 (1978) 6976 CrossRef
Wang, K.L., Cheng, H.S., A numerical solution to the dynamic load, film thickness, and surface temperatures in spur gears, part I Analysis, ASME J. Mech. Design 103 (1981) 177187 CrossRef
J. Perret-Liaudet, J. Sabot, On some bifurcations in a single-degree-of freedom gear model with backlash and mesh stiffness non-linearities, 4th World Congress on Gearing and Power Transmission, Paris 3, 1999, pp. 2003–2015
Kahraman, A., Blankenship, G.W., Experiments on nonlinear dynamic behavior of an oscillator with clearance and periodically time-varying parameters, ASME J. Appl. Mech. 64 (1997) 217226 CrossRef
Kahraman, A., Blankenship, G.W., Effect of involute contact ratio on spur gear dynamics, ASME J. Mech. Design 121 (1999) 112118 CrossRef
Kahraman, A., Blankenship, G.W., Effect of involute tip relief on dynamic response of spur gear pairs, ASME J. Mech. Design 121 (1999) 313315 CrossRef
Perret-Liaudet, J., Sabot, J., Sur quelques comportements dynamiques non-linéaires des engrenages, Mécanique Industrielle et Matériaux 51 (1998) 170172
A. Nayfeh, B. Balachandran, Applied Nonlinear Dynamics, John Wiley and Sons, New York, 1995
R. Seydel, Practical Bifurcation and Stability Analysis – From Equilibrium to Chaos, Springer, Berlin, 1994