Hostname: page-component-5c6d5d7d68-wbk2r Total loading time: 0 Render date: 2024-08-09T02:17:37.346Z Has data issue: false hasContentIssue false

Microstructure of the Die-Upset Nd (Pr)-Fe-B Hard Magnets Studied by Magnetic and High Resolution Transmission Microscopy

Published online by Cambridge University Press:  02 July 2020

V.V. Volkov
Affiliation:
Dept. of Applied Sciences, Brookhaven National Laboratory, Upton, NY, 11973
Y. Zhu
Affiliation:
Dept. of Applied Sciences, Brookhaven National Laboratory, Upton, NY, 11973
L.H. Lewis
Affiliation:
Dept. of Applied Sciences, Brookhaven National Laboratory, Upton, NY, 11973
D.O. Welch
Affiliation:
Dept. of Applied Sciences, Brookhaven National Laboratory, Upton, NY, 11973
Get access

Extract

Magnetic properties of permanent magnets are sensitive to their microstructure. In particular, for a class of Nd(Pr)-Fe-B magnets very different coercivity and energy products may be obtained by different processing techniques. In this work we report on the preliminary results of magnetic domains (MD) structure and grain boundaries (GB) analysis of such hot-deformed Nd(Pr)-Fe-B magnets. To reveal the fine details of MD and GB interaction the experiments were carried out by the combined use of Magnetic Foucault-Fresnel Imaging and High Resolution Microscopy.

The magnets used in this study had a nominal composition Nd13.75Fe80.25B6 (I) and Pr13.75Fe80.25B6 (II) and were produced at the General Motors Research and Development Center. Buttons of the die-upset samples were prepared from overquenched ribbons using the melt-spun technique. Thin sections were cut from the buttons obtained by die-upset of the ribbons of I and II. These sections were mechanically polished and then ion milled until perforation. Electron microscopy was done using a JEM 2000FX microscope operating at 200 kV.

Type
Metals and Alloys
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 This research was supported by the U.S. Department of Energy, Division of Materials, Office of Basic Energy Science, under the Contract No. DE-AC02-76CH0016.Google Scholar