Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Knutsson, Axel
Hedström, Peter
and
Odén, Magnus
2008.
Reverse Martensitic Transformation and Resulting Microstructure in a Cold Rolled Metastable Austenitic Stainless Steel.
steel research international,
Vol. 79,
Issue. 6,
p.
433.
ARIAS, J.
CABEZA, M.
CASTRO, G.
FEIJOO, I.
MERINO, P.
and
PENA, G.
2010.
Microstructural characterization of laser surface melted AISI M2 tool steel.
Journal of Microscopy,
Vol. 239,
Issue. 3,
p.
184.
Hebda, M.
Gądek, S.
Skałoń, M.
and
Kazior, J.
2013.
Effect of mechanical alloying and annealing on the sintering behaviour of AstaloyCrL powders with SiC and carbon addition.
Journal of Thermal Analysis and Calorimetry,
Vol. 113,
Issue. 1,
p.
395.
Atapek, Ş. H.
Polat, Ş.
Gümüş, S.
Erişir, E.
and
Altuğ, G. S.
2014.
Determination of the Microstructure of Powder Tool Steels by Different Etching Techniques.
Metal Science and Heat Treatment,
Vol. 56,
Issue. 3-4,
p.
152.
Shirdel, Mohammad
Mirzadeh, Hamed
and
Habibi Parsa, Mohammad
2014.
Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel.
Metallurgical and Materials Transactions A,
Vol. 45,
Issue. 11,
p.
5185.
Shirdel, M.
Mirzadeh, H.
and
Parsa, M.H.
2014.
Abnormal grain growth in AISI 304L stainless steel.
Materials Characterization,
Vol. 97,
Issue. ,
p.
11.
Fabas, Aurélien
Monceau, Daniel
Josse, Claudie
Lamesle, Pascal
and
Rouaix-Vande Put, Aurélie
2016.
Mechanism of metal dusting corrosion by pitting of a chromia-forming alloy at atmospheric pressure and low gas velocity.
Corrosion Science,
Vol. 107,
Issue. ,
p.
204.
Barbosa, Cassio
de Cerqueira Abud, Ibrahim
Barros, Tatiana Silva
and
de Carvalho, Sheyla Santana
2016.
Failure Analysis of Tool Steel-Based Compaction Punch Used in Powder Metallurgy.
Journal of Failure Analysis and Prevention,
Vol. 16,
Issue. 1,
p.
104.
Khan, Fareed
2018.
The Effect of Soaking on Segregation and Primary-Carbide Dissolution in Ingot-Cast Bearing Steel.
Metals,
Vol. 8,
Issue. 10,
p.
800.
Dilawary, Shaikh Asad Ali
Motallebzadeh, Amir
Houdková, Šárka
Medlin, Rostislav
Haviar, Stanislav
Lukáč, František
Afzal, Muhammad
and
Cimenoglu, Huseyin
2018.
Modification of M2 hardfacing: Effect of molybdenum alloying and laser surface melting on microstructure and wear performance.
Wear,
Vol. 404-405,
Issue. ,
p.
111.
Bertuccioli, C.
Ceschini, L.
and
Martini, C.
2019.
Steel components for packaging devices in sliding/rolling contact: Metallurgical failure analysis.
Engineering Failure Analysis,
Vol. 102,
Issue. ,
p.
338.
Maistro, Giulio
Yao, Yiming
Klement, Uta
Nyborg, Lars
and
Cao, Yu
2020.
On surface carbides in low-temperature carburized austenitic stainless steels.
Materials Characterization,
Vol. 167,
Issue. ,
p.
110462.
Pashangeh, Shima
Ghasemi Banadkouki, Seyyed Sadegh
Besharati, Fatemeh
Mehrabi, Fatemeh
Somani, Mahesh
and
Kömi, Jukka
2021.
Color Light Metallography Versus Electron Microscopy for Detecting and Estimating Various Phases in a High-Strength Multiphase Steel.
Metals,
Vol. 11,
Issue. 6,
p.
855.
Srijampan, Wananurat
Wiengmoon, Amporn
Wanalerkngam, Arisara
Boonmee, Sarum
Yotkaew, Thanyaporn
Tosangthum, Nattaya
and
Tongsri, Ruangdaj
2022.
Identification of Carbides and Phase Transformations in Sintered Fe–Mo–Mn–C Alloys Produced under a Slow Continuous Cooling.
ISIJ International,
Vol. 62,
Issue. 11,
p.
2366.
Javaheri, Vahid
Pallaspuro, Sakari
Sadeghpour, Saeed
Ghosh, Sumit
Sainio, Johannes
Latypova, Renata
and
Kömi, Jukka
2023.
Rapid tempering of a medium-carbon martensitic steel: In-depth exploration of the microstructure – mechanical property evolution.
Materials & Design,
Vol. 231,
Issue. ,
p.
112059.
Aydogmus, Tuna
Peker, Derya
and
Topuz, Polat
2023.
Wear properties of borided WC-Co.
Materials Testing,
Vol. 65,
Issue. 6,
p.
867.
Zhao, Jiankang
Li, Haijun
Han, Bo
Liu, Yakun
and
Wang, Guodong
2024.
Development and Application of On‐Line Solution Annealing Process for 304 Austenitic Stainless Steel.
steel research international,
Vol. 95,
Issue. 4,
Fang, Ning
Zhou, Ziyao
and
Britton, Ben
2024.
The Performance of Different Etchants on the Carbides of Ni600 and Ni625.
Metals,
Vol. 14,
Issue. 1,
p.
91.