Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-24T16:48:55.010Z Has data issue: false hasContentIssue false

Towards 0.1 EV EELS Using a Beam Monochromator And Maxent Deconvolution

Published online by Cambridge University Press:  02 July 2020

P.C. Tiemeijer
Affiliation:
FEI Electron Optics, P O Box 218, 5600, MD, Eindhoven, The Netherlands
M.H.F. Overwijk
Affiliation:
Philips Research, Prof. Holstlaan 4, 5656, AA, Eindhoven, The Netherlands
A.F. de Jong
Affiliation:
FEI Electron Optics, P O Box 218, 5600, MD, Eindhoven, The Netherlands
Get access

Extract

The resolution in Electron Energy Loss Spectroscopy (EELS) in (S)TEM is presently limited by the instabilities of the high voltage supply (typically 0.2 eV), by the resolution of the spectrometer (typically 0.7 eV), and by the energy spread of the electron source (typically 0.7 eV for a Schottky field emitter). An increase of this resolution to better than 0.1 eV would enable chemical analysis on a nanometer scale. We are presently following hardware as well as software approaches in order to reach this energy resolution in a 200 kV (S)TEM.

The hardware side of our project focuses on the three limiting factors mentioned in the previous paragraph. The instabilities of the high voltage supply are mostly noise and drift, which can be reduced significantly by isolating the high voltage tank, thermally as well as acoustically. In addition, Gatan is developing an imaging filter for this project, which has sub-0.1 eV resolution.

Type
Electron Energy-Loss Spectroscopy (EELS) and Imaging
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Tiemeijer, P.C., Ultramicroscopy 78 (1999)53CrossRefGoogle Scholar
2.Tiemeijer, P.C., to appear in Proc. EMAG99 (Sheffield 1999)Google Scholar
3.Overwijk, M.H.F. and Reefman, D., to appear in MicronGoogle Scholar