Hostname: page-component-5c6d5d7d68-vt8vv Total loading time: 0.001 Render date: 2024-08-22T10:24:03.126Z Has data issue: false hasContentIssue false

Compared Biocompatibility of ZnTiO3, ZnO and TiO2 Sol-Gel Films with Human Mesenchymal Stem Cells

Published online by Cambridge University Press:  15 February 2016

Rosalía Delgado Carrascón
Affiliation:
Departamento de Física Aplicada, Universidad Autónoma de Madrid, Madrid, 28049, Spain.
Dario Gallach Pérez
Affiliation:
Departamento de Física Aplicada, Universidad Autónoma de Madrid, Madrid, 28049, Spain.
Josefa.P. Carcía Ruiz
Affiliation:
Departamento de Biología Molecular, Universidad Autónoma de Madrid, Madrid, 28049, Spain.
Miguel Manso Silvan*
Affiliation:
Departamento de Física Aplicada, Universidad Autónoma de Madrid, Madrid, 28049, Spain.
*
Get access

Abstract

The biomedical applications of ZnO are drastically limited by its intrinsic solubility, which shortens the stability and lifetime of devices. We show that the functionality of ZnO in human mesenchymal stem cell (hMSC) studies is limited due to poor cell adhesion. The sol-gel route has been employed to obtain zinc titanate thin films for their integration as surface protective layer on ZnO. These films were obtained from zinc acetate (ZnAc) and titanium isopropoxide (TIPT). So derived xerogels were dried and their thermal evolution studied by TGM-DTA to identify critical annealing temperatures. The evolution of the microstructure and composition of spun cast films was determined by XRD and FTIR. Organic and ionic byproducts were eliminated at T>300°C, which kickstarts a transformation of the amorphous materials into polycrystalline. Thin films consisted of the ZnTiO3 perovskite from annealing temperatures of 500°C. Cell adhesion on the synthesized samples (both amorphous and crystalline) was assayed by culturing hMSCs. Immunofluorescence images of actin cytoskeleton were obtained and proliferation studied using Ki67. Cell density, single cell area and proliferation rates on ZnTiO3 films were closer to control TiO2 surfaces than to ZnO films. Such behavior validates the short term biocompatibility of ZnTiO3 films and its potential use as surface layer for ZnO biomedical devices.

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Krylova, G., Brioude, A., Ababou-Girard, S., Mrazek, J., Spanhel, L., Phys. Chem. Chem. Phys. 12 15101 (2010).Google Scholar
Tangi, A., Grasset, F., Potel, M., Nazabal, V., Cardinal, T., Pechev, S., Saito, N., Ohashi, N., Haneda, H.. Sci. Technol. Adv. Mater. 11 044401 (2010).Google Scholar
Wu, S.C., Yau, W.H., Tsai, C.H., Chou, C.P.. Surf. Interf. Anal. 44 1314 (2012).Google Scholar
Manso, M., Ogueta, S., García, P., Pérez-Regueiro, J., Jiménez, C., Martínez-Duart, J.M., Langlet, M.. Biomaterials 23 349 (2002).CrossRefGoogle Scholar
Gupta, R., Kumar, A.. Biomed. Mater. 3 034005 (2008).Google Scholar
Wang, D., Bierwagen, G.P.. Progr. Org. Coat. 64 327 (2009).Google Scholar
Znaidi, L.. Mater. Sci. Eng. B 174 18 (2010).CrossRefGoogle Scholar
Chang, Y.S., Chang, Y.H., Chen, I.G., Chen, G.J., Chai, Y.L.. J. Crys. Growth 243 319 (2002).Google Scholar
Mohammadi, M.R., Fray, D.J.. J. Eur. Cer. Soc. 30 947 (2010).Google Scholar
Yamaguchi, O., Morimi, M., Kawabata, H., Shimizu, K.. J. Am. Cer. Soc. 70 97 (1987).Google Scholar
Kumar, K., Chitkaraa, M., Sandhua, I.S., Mehta, D., Kumar, S.. J. All. Comp. 588 681 (2014).CrossRefGoogle Scholar