Hostname: page-component-77c89778f8-cnmwb Total loading time: 0 Render date: 2024-07-22T00:27:55.394Z Has data issue: false hasContentIssue false
  • English
  • Français

Bridged Polysilses-quioxanes: Molecular Engineering of Hybrid Organic–Inorganic Materials

Published online by Cambridge University Press:  31 January 2011

K.J. Shea  and
D.A. Loy
Get access

Extract

Hybrid materials lie at the interface of the organic and inorganic realms. These materials offer exceptional opportunities not only to combine important properties from both worlds, but also to create entirely new compositions with truly unique properties.

Type
Research Article
Information
MRS Bulletin , Volume 26 , Issue 5: Hybrid Organic-Inorganic Materials , May 2001 , pp. 368 - 376
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Loy, D.A. and Shea, K.J., Chem. Rev. 95 (5) (1995) p. 1431; K.J. Shea and D.A. Loy, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 41 (1) (2000) p.505.CrossRefGoogle Scholar
2. Shea, K.J., Loy, D.A., and Webster, O.W., J.Am. Chem. Soc. 114 (17) (1992) p.6700.CrossRefGoogle Scholar
3. Barton, T.J., Bull, L.M., Klemperer, W.G., Loy, D.A., McEnaney, B., Misono, M., Monson, P.A., Pez, G., Scherer, G.W., Vartuli, J.C., and Yaghi, O.M., Chem. Mater. 11 (10) (1999) p.2633.CrossRefGoogle Scholar
4. Choi, K.M. and Shea, K.J.Photonic Polymer Synthesis, edited by Wise, G.Wnik, G.Trantolo, M. and Graham, B. (Marcel Dekker, New York, 1998) p.437.Google Scholar
5. Cerveau, G. and Corriu, R.J.P.Coord. Chem. Rev. 178–180 (2) (1998) p.1051.CrossRefGoogle Scholar
6. Lindner, E.Schneller, T.Auer, F. and Mayer, H.A., Angew. Chem., Int. Ed. Engl. 38 (15) (1999) p.2155.3.0.CO;2-T>CrossRefGoogle Scholar
7. Corriu, R.J.P.Angew. Chem., Int. Ed. Engl. 39 (8) (2000) p.1376.3.0.CO;2-S>CrossRefGoogle Scholar
8. Shea, K.J.Loy, D.A. and Webster, O.W.Polym. Mater. Sci. Eng. 63 (1990) p.281.Google Scholar
9. Shea, K.J.Loy, D.A. and Webster, O.W.Chem. Mater. 1 (6) (1989) p.572.Google Scholar
10. Shea, K.J.Webster, O. and Loy, D.A. in Better Ceramics Through Chemistry IV, edited by Zelinski, B.J.J.Brinker, C.J.Clark, D.E. and Ulrich, D.R. (Mater. Res. Soc. Symp. Proc. 180, Pittsburgh, 1990) p.975.Google Scholar
11. Small, J.H.Shea, K.J. and Loy, D.A.J. Non-Cryst. Solids 160 (3) (1993) p.234.CrossRefGoogle Scholar
12. Corriu, R.J.P.Moreau, J.J.E.Thepot, P. and Man, M.W.C.Chem. Mater. 4 (6) (1992) p. 1217.CrossRefGoogle Scholar
13. Corriu, R.J.P.Moreau, J.J.E.Thepot, P.Man, M. Wong Chi, Chorro, C.Lere-Porte, J.-P., and Sauvajol, J.-L., Chem. Mater. 6 (5) (1994) p.640.Google Scholar
14. Loy, D.A.Carpenter, J.P.Yamanaka, S.A.McClain, M.D.Greaves, J.Hobson, S. and Shea, K.J.Chem. Mater. 10 (12) (1998) p. 4129; J.P. Carpenter, S.A. Yamanaka, M.D. McClain, D.A. Loy, J.Greaves, and K.J. Shea, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 39 (1) (1998) p. 589; R.M. Shaltout, D.A. Loy, J.P. Carpenter, P.K. Dorhout, and K.J. Shea, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 40 (2) (1999) p.906.CrossRefGoogle Scholar
15. Corriu, R.J.P.Moreau, J.J.E.Thepot, P., and Man, M.W.C.J. Mater. Chem. 4 (6) (1994) p. 987.CrossRefGoogle Scholar
16. Boury, B. and Corriu, R.J.P.Adv. Mater. 12 (13) (2000) p. 989; B. Boury, R.J.P. Corriu, P. Delord, and V. Le Strat, J. Non-Cryst. Solids 265 (1,2) (2000) p. 41; B. Boury, R.J.P. Corriu, and V. Le Strat, Chem. Mater. 1 (10) (1999) p. 2796; B. Boury, P. Chevalier, R.J.P. Corriu, P. Delord, J.J.E. Moreau, and M.C.M. Wong, Chem. Mater. 11 (2) (1999) p.281; B. Boury, R.J.P. Corriu, V. Le Strat, and P. Delord, New J.Chem. 23 (5) (1999) p.531; P. Chevalier, R.J.P. Corriu, P. Delord, J.J.E. Moreau, and M.C.M. Wong, New J.Chem. 22 (5) (1998) p.423; P.M. Chevalier, R.J.P. Corriu, J.J.E. Moreau, and M.W.C. Man, J.Sol-Gel Sci. Technol. 8 (1-3) (1997) p.603.Google Scholar
17. Oviatt, H.W. Jr, Shea, K.J. and Small, J.H.Chem. Mater. 5 (7) (1993) p. 943; D.A. Loy, G.M. Jamison, B.M. Baugher, E.M. Russick, R.A. Assink, S. Prabakar, and K.J. Shea, J.Non-Cryst. Solids 186 (1995) p.44.Google Scholar
18. Loy, D.A.Baugher, B.M. S. Prabakar, Assink, R.A. and Shea, K.J. in Advances in Porous Materials, edited by Komarneni, S., Smith, D.M. and Beck, J.S. (Mater. Res. Soc. Symp. Proc. 371, Pittsburgh, 1995) p. 229; B.M. Baugher, D.A. Loy, S. Prabakar, R.A. Assink, K.J. Shea, and H. Oviatt, in Advances in Porous Materials, edited by S. Komarneni, D.M. Smith, and J.S. Beck (Mater. Res. Soc. Symp. Proc. 371, Pittsburgh, 1995) p.253.Google Scholar
19. Loy, D.A.Carpenter, J.P.Myers, S.A.Assink, R.A.Small, J.H.Greaves, J., and Shea, K.J.J. Am. Chem. Soc. 118 (35) (1996) p. 8501; Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 37 (2) (1996) p.398; S.A. Myers, R.A. Assink, D.A. Loy, and K.J. Shea, J. Chem. Soc., Perkin Trans. 2 3 (2000) p. 545; D.A. Loy, J.P. Carpenter, S.A. Myers, R.A. Assink, J.H. Small, J. Greaves, and K.J. Shea, in Better Ceramics Through Chemistry VI: Organic/Inorganic Hybrid Materials, edited by B.K. Coltrain, C. Sanchez, D.W. Schaefer, and G.L. Wilkes (Mater. Res. Soc. Symp. Proc. 435, Pittsburgh, 1996) p.33; D.A. Loy, J.P. Carpenter, T.M. Alam, R. Shaltout, P.K. Dorhout, J. Greaves, J.H. Small, and K.J. Shea, J. Am. Chem. Soc. 121 (23) (1999) p.5413.CrossRefGoogle Scholar
20. Li, C.Glass, T. and Wilkes, G.L.J. Inorg. Organomet. Polym. 9 (2) (1999) p.79.CrossRefGoogle Scholar
21. Loy, D.A.Beach, J.V.Baugher, B.M.Assink, R.A.Shea, K.J.Tran, J. and Small, J.H.Chem. Mater. 11 (11) (1999) p.3333.CrossRefGoogle Scholar
22. Kohjiya, S. and Ikeda, Y.Rubber Chem. Tech-nol. 73 (3) (2000) p. 534; F. Thurn and S. Wolff, Kautsch. Gummi Kunstst. 28 (12) (1975) p.733.CrossRefGoogle Scholar
23. Bezombes, J.-P., Chuit, C.Corriu, R.J.P. and Reye, C.Can. J. Chem. 78 (11) (2000) p. 1519; R.J.P. Corriu, C. Hoarau, A. Mehdi, and C. Reye, Chem. Commun. (1) (2000) p. 71; J.-P. Bezombes, C. Chuit, R.J.P. Corriu, and C. Reye, J. Mater. Chem. 9 (8) (1999) p. 1727; M. Jurado-Gonzalez, D. Li Ou, B. Ormsby, A.C. Sullivan, and J.R.H. Wilson, Chem. Commun. (1) (2001) p.67; A. Aliev, D. Li Ou, B. Ormsby, and A.C. Sullivan, J.Mater. Chem. 10 (12) (2000) p.2758.CrossRefGoogle Scholar
24. Gemeinhardt, G.C.Young, S.K. and Mauritz, K.A.Polym. (Am. Chem. Soc., Div. Polym. Chem.) 39 (1) (1998) p. 379; C. Guizard and P. Lacan, New J.Chem. 18 (10) (1994) p.1097.Google Scholar
25. Vlasova, N.N.Pestunovich, A.E.Pozhidaev, Y.N.Kirillov, A.I. and Voronkov, M.G.Izv. Sib. Otd. Akad. Nauk SSSR, Ser. Khim. Nauk 2 (1989) p.106.Google Scholar
26. Shaltout, R.M.Loy, D.A.McClain, M.D.Prabakar, S.Greaves, J., and Shea, K.J.Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 41 (1) (2000) p.508.Google Scholar
27. Loy, D.A.Beach, J.V.Baugher, B.M.Assink, R.A.Shea, K.J.Tran, J. and Small, J.H. in Organic/Inorganic Hybrid Materials II, edited by Klein, L.C.Francis, L.F.Guire, M.R. De, and Mark, J.E. (Mater. Res. Soc. Symp. Proc. 576, Warrendale, PA, 1999) p.99.Google Scholar
28. Loy, D.A.Shea, K.J. and Russick, E.M. in Better Ceramics Through Chemistry V, edited by Hampden-Smith, M.J., Klemperer, W.G. and Brinker, C.J. (Mater. Res. Soc. Symp. Proc. 271, Pittsburgh, 1992) p.699.Google Scholar
29. Inagaki, S.Guan, S.Fukushima, Y.Ohsuna, T., and Terasaki, O.J. Am. Chem. Soc. 121 (41) (1999) p. 961; S. Guan, S. Inagaki, T. Ohsuna, and O. Terasaki, J. Am. Chem. Soc. 122 (23) (2000) p.5660; B.J. Melde, B.T. Holland, C.F. Blanford, and A. Stein, Chem. Mater. 11 (11) (1999) p. 3302; C. Yoshina-Ishii, T. Asefa, N. Coombs, M.J. MacLachlan, and G.A. Ozin, Chem. Commun. (24) (1999) p. 2539; T. Asefa, M.J. MacLachlan, N. Coombs, and G.A. Ozin, Nature 402 (6764) (1999) p.867.CrossRefGoogle Scholar
30. Barry, A.J.Depree, L. and Hook, D.E. Br. Patent No.635,645 (1944).Google Scholar
31. Boldebuck, E.N. U.S. Patent No. 2,551,924 (1951).Google Scholar
32. Hobson, S.T. and Shea, K.J.Chem. Mater. 9 (2) (1997) p.616.CrossRefGoogle Scholar
33. Lu, Y.Fan, H.Doke, N.Loy, D.A.Assink, R.A.LaVan, D.A. and Brinker, C.J.J. Am. Chem. Soc. 122 (22) (2000) p.5258.CrossRefGoogle Scholar
34. Sharp, K.G. and Michalczyk, M.J.J. Sol-Gel Sci. Technol. 8 (1-3) (1997) p.541.Google Scholar
35. Loy, D.A.Buss, R.J.Assink, R.A.Shea, K.J. and Oviatt, H. in Better Ceramics Through Chemistry VI, edited by Cheetham, A.K.Brinker, C.J.Mecartney, M.L. and Sanchez, C. (Mater. Res. Soc. Symp. Proc. 346, Pittsburgh, 1994) p. 825; Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 34 (1) (1993) p. 244; D.A. Loy, K.J. Shea, R.J. Buss, and R.A. Assink, in Inorganic and Organo-metallic Polymers II (ACS Symp. Ser. 572), edited by J.E. Mark, C.Y.-C. Lee, and P.A. Bianconi (American Chemical Society, Washington, DC, 1994) p.122.Google Scholar
36. McClain, M.D.Loy, D.A. and Prabakar, S. in Better Ceramics Through Chemistry VII: Organic/Inorganic Hybrid Materials, edited by Coltrain, B.K.Sanchez, C.Schaefer, D.W. and Wilkes, G.L. (Mater. Res. Soc. Symp. Proc. 435, Pittsburgh, 1996) p.277.Google Scholar
37. Cerveau, G.Corriu, R.J.P. and Dabiens, B.J.Mater. Chem. 10 (5) (2000) p.1113.CrossRefGoogle Scholar
38. Chuit, C.Corriu, R.J.P.Dubois, G. and Reye, C.Chem. Commun. (8) (1999) p. 723; G. Dubois, C. Reye, R.J.P. Corriu, and C. Chuit, J.Mater. Chem. 10 (5) (2000) p.1091.CrossRefGoogle Scholar
39. Cerveau, G.Corriu, R.J.P.Lepeytre, C. and Mutin, P.H.J.Mater. Chem. 8 (12) (1998) p.2707.Google Scholar
40. Carr, S.W., Ou, D. Li, and Sullivan, A.C., J.Sol-Gel Sci. Technol. 13 (1-3) (1998) p.31.CrossRefGoogle Scholar
41. Suratwala, T.Gardlund, Z.Davidson, K.Uhlmann, D.R.Watson, J.Bonilla, S. and Peyghambarian, N.Chem. Mater. 10 (1) (1998) p.199; T. Suratwala, Z. Gardlund, K. Davidson, D.R. Uhlmann, J. Watson, and N. Peyghambarian, Chem. Mater. 10 (1) (1998) p.190.CrossRefGoogle Scholar
42. Xia, H.Zhu, C.Gan, F.Chen, Y.Yu, B.Cai, R. and Huang, Z.Full. Sci. Tech. 5 (7) (1997) p.1621.CrossRefGoogle Scholar
43. Ki, C.D.Kim, J.K.Hwang, S.S. and Hong, S.I.Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 41 (1) (2000) p.600.Google Scholar
44. Bookbinder, D.C. and Wrighton, M.S.J.Am. Chem. Soc. 102 (15) (1980) p.5123; J.G. Gaudiello, P.K. Ghosh, and A.J. Bard, J.Am. Chem. Soc. 107 (11) (1985) p.3027.CrossRefGoogle Scholar
45. Taylor-Smith, R.E. and Choi, K.M.Polym. Mater. Sci. Eng. 83 (2000) p. 237; R.E. Taylor-Smith and K.M. Choi, in Organic/Inorganic Hybrid Materials II, edited by L.C. Klein, L.F. Francis, M.R. De Guire, and J.E. Mark (Mater. Res. Soc. Symp. Proc. 576, Warrendale, PA, 1999) p.433.Google Scholar
46. Li, W., Wang, Q.Cui, J., Chou, H.Shaheen, S.E.Jabbour, G.E.Anderson, J.Lee, P.Kippelen, B.Peyghambarian, N.Armstrong, N.R. and Marks, T.J., Adv. Mater. 11 (9) (1999) p.730.Google Scholar
47. Oviatt, H.W. Jr, Shea, K.J.Kalluri, S.Shi, Y.Steier, W.H. and Dalton, L.R.Chem Mater. 7 (1995) p. 493; L.R. Dalton, A.W. Harper, R. Ghosn, W.H. Steier, M. Ziari, H. Fetterman, Y. Shi, R.V. Mustacich, A.K.-Y. Jen, and K.J. Shea, Chem. Mater. 7 (1995) p. 1060; B. Lebeau, S. Brasselet, J. Zyss, and C. Sanchez, Chem. Mater. 9 (4) (1997) p. 1012; S.T. Hobson, J. Zieba, P.N. Prasad, and K.J. Shea, in Organic Nonlinear Optical Materials and Devices, edited by B. Kippelen, H.S. Lackritz, and R.O. Claus (Mater. Res. Soc. Symp. Proc. 561, Warrendale, PA, 1999) p.21; S. Han, Z.Li, S. Ji, D. Dai, R. Zhang, C. Zhu, and C. Wang, J. Sol-Gel Sci. Technol. 18 (2) (2000) p.137.Google Scholar
48. Ribeiro, A.O.Biazzotto, J.C. and Serra, O.A.J. Non-Cryst. Solids 273 (1-3) (2000) p. 198; H. Xia, M. Nogami, T. Hayakawa, D. Imaizumi, and S. Dai, J. Mater. Sci. Lett. 18 (22) (1999) p.1837.Google Scholar
49. Biazzotto, J.C.Sacco, H.C.Ciuffi, K.J.Ferreira, A.G., and Serra, O.A.J. Non-Cryst. Solids 273 (1-3) (2000) p. 186; H.C. Sacco, K.J. Ciuffi, J.C. Biazzotto, M.R. Zuccki, C.A.P. Leite, O.R. Nascimento, O.A. Serra, and Y. Iamamoto, J. Non-Cryst. Solids 273 (1-3) (2000) p. 150; K.J. Ciuffi, H.C. Sacco, J.C. Biazzotto, E.A. Vidoto, O.R. Nascimento, C.A.P. Leite, O.A. Serra, and Y. Iamamoto, J.Non-Cryst. Solids 273 (1-3) (2000) p. 100; J.C. Biazzotto, H.C. Sacco, K.J. Ciuffi, C.R. Neri, A.G. Ferreira, Y. Iamamoto, and O.A. Serra, J.Non-Cryst. Solids 247 (1999) p.134.Google Scholar
50. Corriu, R.J.P.Hesemann, P. and Lanneau, G.F.Chem. Commun. (15) (1996) p.1845.Google Scholar
51. Hwang, K.-O. and Sasaki, T.J. Mater. Chem. 8 (9) (1998) p.2153.Google Scholar
52. Kirillov, A.I.Panezhda, E.V.Pozhidaev, Y.N.Belousova, L.I.Vlasova, N.N. and Voronkov, M.G.Zh. Prikl. Khim. 73 (3) (2000) p. 520; N.N. Vlasova, A.I. Kirillov, Y.N. Pozhidaev, E.V. Panezhda, L.I. Belousova, and M.G. Voronkov, Dokl. Akad. Nauk 364 (4) (1999) p. 492; M.G. Voronkov, N.N. Vlasova, and A.E. Pestunovich, Russ. J. Gen. Chem. 68 (5) (1998) p. 770; N.N. Vlasova, Y.N. Pozhidaev, O.Y. Raspopina, L.I. Belousova, and M.G. Voronkov, Russ. J. Gen. Chem. 69 (9) (1999) p.1391.Google Scholar
53. Kloster, G.M. and Watton, S.P.Inorg. Chim. Acta 297 (1-2) (2000) p. 156; G.M. Kloster, C.M. Taylor, and S.P. Watton, Inorg. Chem. 38 (18) (1999) p.3954.CrossRefGoogle Scholar
54. Adima, A.Moreau, J.J.E. and Man, M.W.C.J. Mater. Chem. 7 (12) (1997) p. 331; Chirality 12 (5/6) (2000) p. 411; J.J.E. Moreau and M. Wong Chi Man, Coord. Chem. Rev. 178-180 (2) (1998) p.1073.CrossRefGoogle Scholar
55. Broudic, J.-C., Conocar, O.Moreau, J.J.E.Meyer, D., and Man, W.C.M.J. Mater. Chem. 9 (10) (1999) p.2283.Google Scholar
56. Hesemann, P. and Moreau, J.J.E.Tetrahedron: Asymmetry 11 (10) (2000) p.2183.Google Scholar
57. Lindner, E.Jaeger, A.Schneller, T. and Mayer, H.A.Chem. Mater. 9 (1) (1997) p.81; E. Lindner, A. Jaeger, F. Auer, W. Wielandt, and P. Wegner, J. Mol. Catal. A: Chem. 129 (1) (1998) p. 91; E. Lindner, W. Wielandt, A. Baumann, H.A. Mayer, U. Reinoehl, A. Weber, T.S. Ertel, and H. Bertagnolli, Chem. Mater. 11 (7) (1999) p.1833.Google Scholar
58. Lindner, E.Schneller, T.Mayer, H.A.Bertagnolli, H.Ertel, T.S. and Hoerner, W.Chem. Mater. 9 (7) (1997) p.1524.Google Scholar
59. Lindner, E.Enderle, A. and Baumann, A.J.Organomet. Chem. 558 (1-2) (1998) p.235.Google Scholar
60. Audebert, P., Cerveau, G., Corriu, R.J.P., and Costa, N., J. Electroanal. Chem. 413 (1-2) (1996) p. 89; P. Audebert, P. Calas, G. Cerveau, R.J.P. Corriu, and N. Costa, J. Electroanal. Chem. 372 (1-2) (1994) p. 275; G. Cerveau, R.J.P. Corriu, and N. Costa, J. Non-Cryst. Solids 163 (3) (1993) p.226.Google Scholar
61. Choi, K.M. and Shea, K.J.Chem. Mater. 5 (1993) p. 1067; K.M. Choi and K.J., Shea in Better Ceramics Through Chemistry VI, edited by A.K., Cheetham, C.J., Brinker, M.L., Mecartney and C. Sanchez (Mater. Res. Soc. Symp. Proc. 346, Pittsburgh, 1994) p. 763; K.M. Choi, J.C. Hemminger, and K.J. Shea, J. Phys. Chem. 99 (1995) p.4720; G. Cerveau, R.J.P. Corriu, C. Lep-eytre, and F.-L.Cedric, Chem. Mater. 9 (11) (1997) p. 2561; G. Cerveau, R.J.P. Corriu, and C. Lep-eytre, J.Mater. Chem. 5 (5) (1995) p.793.Google Scholar
62. Cerveau, G.Corriu, R.J.P., Dabosi, J.Fischmeister-Lepeytre, C., and Combarieu, R.Rapid Commun. Mass Spectrom. 13 (21) (1999) p.2183; G. Cerveau, R.J.P. Corriu, J.Dabosi, J.-L. Aubagnac, R. Combarieu, and Y. de Puydt, J.Mater. Chem. 8 (8) (1998) p.1761.3.0.CO;2-G>CrossRefGoogle Scholar
63. Loy, D.A.Russick, E.M.Yamanaka, S.A.Baugher, B.M. and Shea, K.J.Chem. Mater. 9 (11) (1997) p.2264.CrossRefGoogle Scholar
64. Ben, F., Boury, B., Corriu, R.J.P. and Strat, V. Le, Chem. Mater. 12 (11) (2000) p. 3249; R. Corriu, B. Boury, V. Le Strat, F. Ben, P. Delord, and M. Nobili, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 41 (1) (2000) p.510; B. Boury, R.J.P. Corriu, V. Le Strat, P. Delord, and M. Nobili, Angew. Chem., Int. Ed. Engl. 38 (21) (1999) p.3172; G. Cerveau, C. Chorro, R. Corriu, C. Lepeytre, J.P. Lere-Porte, J. Moreau, P. Thepot, and M.W.C. Man, in Hybrid Organic-Inorganic Composites (ACS Symp. Ser. 585) (American Chemical Society, Washington, DC, 1995) p.210.Google Scholar
65. Schaefer, D.W.Beaucage, G.B.Loy, D.A.Ulibarri, T.A. E. Black, Shea, K.J. and Buss, R.J. in Better Ceramics Through Chemistry VI: Organic/Inorganic Hybrid Materials, edited by Coltrain, B.K.Sanchez, C., Schaefer, D.W. and Wilkes, G.L. (Mater. Res. Soc. Symp. Proc. 435, Pittsburgh, 1996) p. 301; F. Cavatorta, D.A. Cauzzi, and G. Predieri, Physica B 234-236 (1997) p.396.Google Scholar
66. Ameduri, B., Boutevin, B., Moreau, J.J.E., Moutaabbid, H., and Man, M.W. Chi, J. Fluorine Chem. 104 (2) (2000) p.185.Google Scholar
67. Brinker, C.J.Sehgal, R.Hietala, S.L.Deshpande, R.Smith, D.M.Loy, D. and Ashley, C.S.J.Membr. Sci. 94 (1-3) (1994) p.85.Google Scholar
68. Katz, A. and Davis, M.E.Nature 403 (6767) (2000) p.286.Google Scholar
69. Loy, D.A. PhD thesis, University of California—Irvine, 1991.Google Scholar
70. Brandvold, T.A. U.S. Patent No. 5,475,162 (1994).Google Scholar
71. Choi, K.M. and Shea, K.J.J. Sol-Gel Sci. Technol. 5 (1995) p. 143; J. Am. Chem. Soc. 116 (1994) p.9052.CrossRefGoogle Scholar
72. Dai, S.Burleigh, M.C.Ju, Y.H.Gao, H.J.Lin, J.S.Pennycook, S.J.Barnes, C.E. and Xue, Z.L.J.Am. Chem. Soc. 122 (5) (2000) p.992.CrossRefGoogle Scholar
73. Shea, K.J. (unpublished results).Google Scholar