Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-29T16:26:58.468Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Ultramicrotomy to Tem Specimen Preparation of Particulate Inclusion and Composite Materials.

Published online by Cambridge University Press:  21 February 2011

O. O. Popoola ,
J. J. Cooper ,
B. P. Jakstys  and
W. M. Kriven
O. O. Popoola
Affiliation:
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801.
J. J. Cooper
Affiliation:
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801.
B. P. Jakstys
Affiliation:
Center for Electron Microscopy, 74 Bevier Hall, Urbana, IL 61801.
W. M. Kriven
Affiliation:
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801.
Get access

Abstract

Ultramicrotomy has been used to prepare TEM specimens from nickel sulfide inclusions in plate glass and from calcium aluminate / polyvinyl alcohol composite materials. Microstructural studies showed that the inclusion probably contained at least two different phases, namely Ni7S6 and Ni3S2. Although microtomy-induced cracking and chatter were observed, important microstructural features such as twins and Moire patterns were preserved. The microchemistry of the polymer phase in the ceramic / polymer composite was precisely determined.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 254: Symposium W – Specimen Preparation for Transmission Electron Microscopy of Materials III , 1991 , 271
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Reimer, L., Z. Metalk, 50, 37 (1959).Google Scholar
2. Philips, R., Brit. J. Appl. Phys., 12, 554 (1961).Google Scholar
3. Timsit, R. S., Hutchinson, J. L. and Thornton, M. C., Ultramicroscopy, 15, 371 (1984).Google Scholar
4. Mallis, T. F. and Steele, D., Mat. Res. Soc. Symp. Proc., 199, 1 (1990).Google Scholar
5. Ballantyne, E. R., CSIRO Division of Building Research Report, (1961).Google Scholar
6. Tabuchi, H., 10th Int. Cong. on Glass, Japan. Ceram. Soc. (Kyoto), 3 (1974).Google Scholar
7. Alford, N. M., Birchall, J. D., Mat. Res. Soc. Symp. Proc., 42, 269 (1985).Google Scholar
8. Birchall, J. D., Phil. Trans. R. Soc. Lond., A310, 31(1983).Google Scholar
9. Sinclair, W. and Groves, G. W., J. Mater. Sci., 20, 2846 (1989).Google Scholar
10. Popoola, O. O., Kriven, W. M. and Young, J. F., Ultramicroscopy, 37, 318 (1991).Google Scholar