Hostname: page-component-68945f75b7-s56hc Total loading time: 0 Render date: 2024-08-06T06:22:09.453Z Has data issue: false hasContentIssue false
  • English
  • Français

Benefits and Limitations of Radiatively Heated Suszeptors

Published online by Cambridge University Press:  10 February 2011

A. Kersch
A. Kersch*
Affiliation:
Siemens AG, Corporate Technology, D-81730 Munich
Get access

Abstract

In radiatively heated single wafer reactors, suszeptors are used to control the wafer temperature. This temperature, however, might be significantly different than the suszeptor temperature. The reason is that the conductive coupling of the suszeptor to the wafer is often small, even when the wafer is placed directly on the suszeptor, and the temperature difference is then determined by the optical properties and the spectral distribution of the illumination.

In this paper these temperature differences are calculated with reactor scale simulation for typical geometries. Furthermore the pattern effect is investigated whose magnitude depends on the pattern and the configuration of wafer and suszeptor.

The radiation is modeled with Monte Carlo and the optical properties of the surfaces are calculated from the electromagnetic theory of thin films.

A commercial system with a thick suszeptor for Si-CVD at reduced pressure serves as an example for the size of the discussed effect. The comparison of the simulation with measurements provides a model validation. Then, a typical RTP system equipped with a thin suszeptor is investigated. The configuration is identified under which the thin suszeptor leads to a reduced temperature variation in case of a changing wafer coating and in case of a pattern.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 470: Symposium F – Rapid Thermal and Integrated Processing IV , 1997 , 159
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Timans, P. J. in RTP'96 edited by Fair, R.B., Green, M.L., Lojek, B., Thakur, R.P.S., p. 145–156 Google Scholar
2. Nenyei, Z., Gschwandtner, A. and Marcus, S. in RTP'95 edited by Fair, R. and Lojek, B., p. 58–68 Google Scholar
3. Kersch, A., Schafbauer, T. and Deutschmann, L. in Rapid Thermal and Integrated Processing V edited by Gelphey, J.C., Öztürk, M.C., Thakur, R.P.S., Fiory, A.T. and Roozeboom, F. (Mater. Res. Soc. Proc. 429, Pittsburgh, 1996), p. 71–78 Google Scholar
4. Hebb, J.P. and Jensen, K.F. in RTP'95. p. 198–204Google Scholar
5. Erofeev, A.F., Makhviladze, T.M., Panjukhin, A.V. and Volchek, O.S. in RTP'96. p. 342–346Google Scholar
6. PHOENICS/ACCESS-CVD, Cham Ltd., LondonGoogle Scholar
7. Kersch, A., RTP-Reactor Simulation. The Phoenics Journal, Wimbledon, 1995 Google Scholar
8. Kersch, A., Morokoff, W., Transport Simulation in Microelectronics, Birkhäuser, Basel 1995 Google Scholar
9. Azzam, R. M. A. and Bashara, N. M., Ellipsometry and Polarized Light, North Holland, Amsterdam, 1977 Google Scholar
10. Palik, E. D., Handbook of Optical Constants of Solids, Academic Press, New York, 1985 Google Scholar
11. Siegel, R. and Howell, J.R., Thermal Radiation Heat Transfer. Hemisphere Publishing, Washington, 1992 Google Scholar
12. Schafbauer, T. and Kersch, A. in Process Control, Diagnostics and Modeling, edited by Meyyappan, M., Economu, D.J. and Butler, S.W., ECS Proceedings Volume 95–2, New Jersey, 1995 Google Scholar
13. Dushman, S. and Lafferty, J. M., Scientific Foundations of Vacuum Technique, Wiley, New York, 1962 Google Scholar
14. Denpoh, K., Modeling of Heat Conduction by Rarefied Gases Between Wafer and Suszeptor, 5th International Symposium on Semiconductor Manufacturing, Proceedings VLSI 1996 Google Scholar