Hostname: page-component-84b7d79bbc-l82ql Total loading time: 0 Render date: 2024-07-26T12:17:30.540Z Has data issue: false hasContentIssue false

Characterisation of Partial Melting and Solidification of Granite E93/7 by the Acoustic Emission Technique

Published online by Cambridge University Press:  01 February 2011

Lyubka M. Spasova
Affiliation:
Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield, S1 3JD, UK
Fergus G.F. Gibb
Affiliation:
Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield, S1 3JD, UK
Michael I. Ojovan
Affiliation:
Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield, S1 3JD, UK
Get access

Abstract

The acoustic emission (AE) technique was used to detect and characterise the processes associated with generation of stress waves during melting and solidification of granite E93/7 at a pressure of 0.15 GPa. The AE signals recorded as a result of partial melting of the granite at a temperature of 780°C and subsequent solidification during cooling were distinguished from the equipment noise and their parameters used to characterise the AE sources associated with the phase transformations during melting and solidification of the granite. The mechanisms generating AE during granite melting were differentiated by AE signals with their highest peaks in the frequency spectrum at 170 and 268 kHz. The transformation of the liquid into glass during solidification of the partially melted granite generated AE waves in an essentially broad range of frequencies between 100 and 300 kHz. This preliminary work demonstrates the potential of the AE technique for use in applications related to deep borehole disposal of radioactive wastes.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Pollock, A.A., “Acoustic emission inspection”, Technical Report TR–103–96–12/98, Physical Acoustics Corporation, 1989.Google Scholar
[2] Ono, K., J. Strain Anal., 40 (1), Special Issue Paper N1 (2005).Google Scholar
[3] Lyakhovitskii, M.M., Pokrasin, M.A., Roshchupkin, V.V., Sobol, N.L. and Chernov, A.I., High Temperature 44 (2), 221225 (2006).Google Scholar
[4] Van Bohemen, S.M.C., Hermans, M.J.M. and Ouden, G. Den, Mater. Sci. Tech. 18, 15241529 (2002).Google Scholar
[5] Melekhin, V.P., Mit'ko, M.M., Balakirev, V.F., Spiridonov, M.A. and Chernykh, D.V., Instrum. Exp. Tech. 47 (5), 698700 (2004).Google Scholar
[6] Dul'kin, E., J. Superconductivity 15 (6), 527529 (2002).Google Scholar
[7] Steinberg, J. and Lord, A.E., J. Amer. Ceram. Soc. 63 (3-4), 234235 (1980).Google Scholar
[8] Enoki, M. and Nishinoiri, S., Adv. Mater. Res. 13-14, 283290 (2006).Google Scholar
[9] Gibb, F.G.F., J. Geol. Soc. (London) 157, 2736 (2000)Google Scholar
[10] Attrill, P.G. and Gibb, F.G.F., Lithos 67, 103117 (2003)Google Scholar
[11] Attrill, P.G. and Gibb, F.G.F., Lithos 67, 119133 (2003)Google Scholar
[12] Dalton, J.A. and Gibb, F.G.F, Mineral. Mag. 60, 337345 (1996)Google Scholar
[13] Ojovan, M.I. and Gibb, F.G.F., Proc. WM'05, Tucson, Arizona, WM 5072 (2005).Google Scholar
[14] Standard Terminology for Nondestructive Examination, ASTM E1613, ASTM International, Vol. 03.03, West Conshohocken, Pa, 1989.Google Scholar
[15] McGillem, C.D. and Cooper, G.R., “Continuous and discrete signal and system analysis”, 1984, CBS College Publishing, pp. 174180.Google Scholar
[16] Suzuki, H., Kinjo, T., Hayashi, Y., Takemoto, M. and Ono, K., J. Acoustic Emission 14 (2), 6984 (1996).Google Scholar
[17] Ono, K., “Encyclopedia of Acoustics”, ed. Crocker, Malcolm J., John Wiley & Sons, 1997, pp. 797809.Google Scholar