Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-06-29T01:17:48.434Z Has data issue: false hasContentIssue false

Characterization of Booming Sands

Published online by Cambridge University Press:  11 February 2011

Katherine S. Brantley
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology Mail Code 104–44 Pasadena, CA 91125, USA
Melany L. Hunt
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology Mail Code 104–44 Pasadena, CA 91125, USA
Christopher E. Brennen
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology Mail Code 104–44 Pasadena, CA 91125, USA
Steven S. Gao
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology Mail Code 104–44 Pasadena, CA 91125, USA
Get access

Abstract

Many sand dunes – at least seven in the United States – make loud booming noises when they avalanche. Records of the sound are centuries old, but the cause remains a mystery. This study examines properties of both the sand and the sound.

Properties of the sand reveal clues about the source of the booming. Sand must be extremely dry to boom, but low moisture content alone is not sufficient to facilitate booming. Although the mean grain diameters of both booming and silent dune sands range from 0.20 – 0.40mm, the booming samples have smaller standard deviations. However, synthetic sands with similar size distributions do not boom, so a narrow size distribution cannot be solely responsible for the booming. Studies of the roundness and sphericity of the grains are currently underway.

Air microphone and geophone recordings of the booming indicate that the fundamental frequency varies between 80–105 Hz depending on the dunes. This is consistent with previous measurements. Laboratory recordings of the “burping” sound that booming sand makes when shaken in a jar reveal a broad peak between 150–300 Hz.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Haff, P.K., American Scientist 74, 376381 (1986).Google Scholar
[2] Criswell, D., Lindsay, J., Reasoner, D., Journal of Geophysics Research 80, 49634974 (1975).Google Scholar
[3] Twidale, C.R., The Encyclopedia of Geomorphology, edited by Fairbridge, R.W. (Reinhold Book Corp., New York, 1968), 994996.Google Scholar
[4] Bagnold, R.A., The Physics of Blown Sand and Desert Dunes, Methuen & Co., London, 1941.Google Scholar
[5] Hardin, B.O., Richart, F. E., Journal of the Soil Mechanics and Foundations Division: Proceedings of the American Society of Civil Engineers, 3335 (February 1963).Google Scholar
[6] Valdez, Andrew (private communication).Google Scholar
[7] Trexler, D., Melhorn, W., California Geology 39 (7), 147152 (July 1986).Google Scholar
[8] Sharp, Robert P., Geological Society of America 77, 10451074 (1966).Google Scholar