Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-21T10:14:14.447Z Has data issue: false hasContentIssue false
  • English
  • Français

Compressive, Tensile and Shear Testing of Melt-Foamed Aluminium

Published online by Cambridge University Press:  10 February 2011

H. Von Hagen  and
W. Bleck
H. Von Hagen
Affiliation:
Institute of Ferrous Metallurgy (IEHK), Aachen University of Technology, Intzestr. 1, 52072 Aachen, Germany
W. Bleck
Affiliation:
Institute of Ferrous Metallurgy (IEHK), Aachen University of Technology, Intzestr. 1, 52072 Aachen, Germany
Get access

Abstract

For construction purposes it is utterly important to get detailed information on the possible influence of the foam thickness on the mechanical properties and on the deformation behaviour of metallic foams. The effect of compressive, tensile and shear loads on aluminium foam samples has been examined with the testing methods for sandwich material as described in German and ASTM-standards. The aim is to provide more data on these mechanical properties varying the sample density and thickness. Regarding the results the most reliable material parameters as well as steps towards a relationship between the different strength parameters can be obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 521: Symposium R – Porous & Cellular Materials for Structural Applications , 1998 , 59
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hagen, H. v., Nicklas, D., Bleck, W., in Proceedings of the 5th European Conference on Advanced Materials. Processes and Applications, Vol. 1, edited and published by the Netherlands Society for Materials Science (Zwijndrecht, 1997), p. 415–418.Google Scholar
2. Akiyama, S. et al., European Patent EP 0 210 803 B1 (20 September 1989).Google Scholar
3. Sang, H. and Kenny, L.D., European Patent EP 0 587 619 B1, (10 July 1996).Google Scholar
4. Ashby, M.F., Seymour, C.J., Cebon, D., in Metallschäume, edited by Banhart, J. (MIT Publishers, Bremen, 1997), p. 199–216.Google Scholar